Gunwerks 6ix+, AB Raptor Eight Stack, CGS Hyperion K, Thunder Beast Dominus

[AkMtnRunner]

I used a 10 stack with 3" reflex to hunt with my 338 win mag last fall. I went with the 10 stack because the length isn't much more. If anyone is on the fence, I recommend going with the 8 stack over the 6. I found this write up of someone testing configurations on a 375 Raptor build. He equated the sound of the 10 stack with no reflex to an 8 stack with a 3" reflex. The 10 stack does add 0.9" more total length but reduces the noise down equally for less weight. I also use the reflex though, as AB states that the reflex should be used on 338 magnum cartridges. The recoil reduction is very nice. It's muuuuuuuuch more of a push than a punch now. I originally bought this to go on a 33 Nosler that I've been building up but after my experience with it on the 338 win mag, I sort of wish I had just gone for the 338 RUM.

 

[Ryan Avery]

POI testing still on the books?

I’m looking to buy another suppressor after my Raptor

Yes, waiting on some boolets.

 

[Ryan Avery]

I used a 10 stack with 3" reflex to hunt with my 338 win mag last fall. I went with the 10 stack because the length isn't much more. If anyone is on the fence, I recommend going with the 8 stack over the 6. I found this write up of someone testing configurations on a 375 Raptor build. He equated the sound of the 10 stack with no reflex to an 8 stack with a 3" reflex. The 10 stack does add 0.9" more total length but reduces the noise down equally for less weight. I also use the reflex though, as AB states that the reflex should be used on 338 magnum cartridges. The recoil reduction is very nice. It's muuuuuuuuch more of a push than a punch now. I originally bought this to go on a 33 Nosler that I've been building up but after my experience with it on the 338 win mag, I sort of wish I had just gone for the 338 RUM.

I wonder if sound suppression is linear. If a suppressor beats another suppressor by 2dbs with a 6CM will it beat it by 2dbs from a 300 PRC?

I recently shot with a friend that has a 10 stack and in my 6CM neither of us could notice an audible difference between the eight and the ten stack. I wish I had brought a bigger caliber to compare.

 

[Cameron.25]

The form 3 for my rugged alaskan finally went through and it shipped out Friday. I'm going backpacking for a week right now tho, so I'll go out and do some shooting when I get back

 

[Tahoe1305]

The form 3 for my rugged alaskan finally went through and it shipped out Friday. I'm going backpacking for a week right now tho, so I'll go out and do some shooting when I get back

Was it the Ti of non??

 

[Cameron.25]

Was it the Ti of non??

It was the new TI version

 

[Tahoe1305]

It was the new TI version

Oh I’m excited. Sitting on fence between this and Enticer S-Ti. Same size ish. Alaskan shoots bigger bore and is lighter. I need you to tell me it’s awesome.

 

[Cameron.25]

Oh I’m excited. Sitting on fence between this and Enticer S-Ti. Same size ish. Alaskan shoots bigger bore and is lighter. I need you to tell me it’s awesome.

Haha I'll let you know. That enticer looks nice too, I'd love to try one sometime or see a comparison by someone at least

 

[ElPollo]

I was at the range today with the intent of trying to measure the dB levels of my 8-stack raptor with a 3” reflex on a 16.5” 6.5 cm and a 20” 300 wsm. What I learned is that a dB meter app on an iPhone does a crappy job of measuring noise levels. It basically the spell-check version of noise monitoring. My shooter’s ear measurements for both rifles barely made it above 90 dB. The CM was reading about 87 dB and the WSM was about 92 dB…. Hmm, maybe it was all the pocket link stuck in my phone case. Anyway, as much as I like my Raptor, I don’t think it’s quite that good at suppression. So the pseudo bro-science of having people rate the performance of different cans like @RyanAvery is doing is probably about as good as it gets without sinking significant money into actual professional sound recording gear. Ryan, I appreciate what you are doing with this.

 

[Tahoe1305]

A

I was at the range today with the intent of trying to measure the dB levels of my 8-stack raptor with a 3” reflex on a 16.5” 6.5 cm and a 20” 300 wsm. What I learned is that a dB meter app on an iPhone does a crappy job of measuring noise levels. It basically the spell-check version of noise monitoring. My shooter’s ear measurements for both rifles barely made it above 90 dB. The CM was reading about 87 dB and the WSM was about 92 dB…. Hmm, maybe it was all the pocket link stuck in my phone case. Anyway, as much as I like my Raptor, I don’t think it’s quite that good at suppression. So the pseudo bro-science of having people rate the performance of different cans like @RyanAvery is doing is probably about as good as it gets without sinking significant money into actual professional sound recording gear. Ryan, I appreciate what you are doing with this.

All I heard was wsm at 92db. I’m getting one

 

[ElPollo]

All I heard was wsm at 92db. I’m getting one

Yeah, nah. I might bet your hearing on it, but not mine.

 

[Ryan Avery]

I was at the range today with the intent of trying to measure the dB levels of my 8-stack raptor with a 3” reflex on a 16.5” 6.5 cm and a 20” 300 wsm. What I learned is that a dB meter app on an iPhone does a crappy job of measuring noise levels. It basically the spell-check version of noise monitoring. My shooter’s ear measurements for both rifles barely made it above 90 dB. The CM was reading about 87 dB and the WSM was about 92 dB…. Hmm, maybe it was all the pocket link stuck in my phone case. Anyway, as much as I like my Raptor, I don’t think it’s quite that good at suppression. So the pseudo bro-science of having people rate the performance of different cans like @RyanAvery is doing is probably about as good as it gets without sinking significant money into actual professional sound recording gear. Ryan, I appreciate what you are doing with this.

I started really nerding out on suppressor two years ago. The first thing I learned was dB testing suppressors seemed to be an inexact science. I subscribe to pewscience and Jay is a smart cat but I have shot some of the suppressors that he rates well and it doesn’t always jive with my ears. So it’s a catch 22…. The more I learn the less I know. LOL.

 

[BjornF16]

I started really nerding out on suppressor two years ago. The first thing I learned was dB testing suppressors seemed to be an inexact science. I subscribe to pewscience and Jay is a smart cat but I have shot some of the suppressors that he rates well and it doesn’t always jive with my ears. So it’s a catch 22…. The more I learn the less I know. LOL.

He seems to rate the Omega 300 pretty high.

My Raptor 6 starts its' jail sentence today...but I'm also eyeballing a slightly longer can like the DDC LTi or Nomad LTi.

 

[Ucsdryder]

I started really nerding out on suppressor two years ago. The first thing I learned was dB testing suppressors seemed to be an inexact science. I subscribe to pewscience and Jay is a smart cat but I have shot some of the suppressors that he rates well and it doesn’t always jive with my ears. So it’s a catch 22…. The more I learn the less I know. LOL.

Any way to bro science recoil between them? Maybe a free recoil test on a solid table? This is a great thread!

 

[762 ULTRAMAGA]

On the topic of "Bro Science" here's how a Nomad LT sounds on a 19" barrel suppressing 85 grains of powder behind a 225.
Recoil is light enough to spot my own shots on 20x at 820.
https://rumble.com/v2ay2gs-300-norma-mag-ai-225-eldm.html

 

[Ryan Avery]

On the topic of "Bro Science" here's how a Nomad LT sounds on a 19" barrel suppressing 85 grains of powder behind a 225.
Recoil is light enough to spot my own shots on 20x at 820.
https://rumble.com/v2ay2gs-300-norma-mag-ai-225-eldm.html

Nice!

What’s the weight of the rifle?


Sent from my iPhone using Tapatalk Pro

 

[762 ULTRAMAGA]

Nice!

What’s the weight of the rifle?


Sent from my iPhone using Tapatalk Pro

It's around 6lbs 8 oz, I was a bit concerned it'd be a handful, but man it's nothing with that suppressor.
I'm using a factory plastic stock until my Manners Pro Hunter is done, which will be about 5 months

 

[Ryan Avery]

It's around 6lbs 8 oz, I was a bit concerned it'd be a handful, but man it's nothing with that suppressor.
I'm using a factory plastic stock until my Manners Pro Hunter is done, which will be about 5 months
View attachment 522610

Do me a favor and get the E Brake and tell me if it works

 

[Presswood_936]

Well this thread cost me some money , raptor 4 stack just came in!

 

[762 ULTRAMAGA]

Do me a favor and get the E Brake and tell me if it works

I'd never heard of it, I'm on it!
Will post in a separate thread and stop derailing yours..