HYPERION K Vs HELIOS QD TI

[Formidilosus]

They are threaded 9/16? Or 1/2?

Both. I also have a couple that are cut at 20” and threaded 5/8x24.

 

[Smenning]

No. Most of the bolt rifles that I am using with CGS are just standard T3 lite barrels threaded and then a standard adapter to bring them to 5/8x24.

Any particular adapter (brand) you typically use?

 

[Formidilosus]

Any particular adapter (brand) you typically use?

Nope. I use multiple from multiple companies. “Best” is probably using CGS’s, but others are functionally fine.

 

[Smenning]

Nope. I use multiple from multiple companies. “Best” is probably using CGS’s, but others are functionally fine.

Thanks for the help! I appreciate it.

 

[Veloci_Wrench]

Maybe it has been mentioned, but have you checked out Jay’s work at pewscience.com ? He has objective ratings based from his proprietary formulas suppressor performance. Also, I’m commenting to get myself to The minimum so I can reply on buy/sell listings…

 

[Smenning]

Maybe it has been mentioned, but have you checked out Jay’s work at pewscience.com ? He has objective ratings based from his proprietary formulas suppressor performance. Also, I’m commenting to get myself to The minimum so I can reply on buy/sell listings…

I have looked into it, I believe they have a podcast as well.

 

[grappling_hook]

I have looked into it, I believe they have a podcast as well.

Jay is also a regular on the NFA Reddit and answers questions about his tests and suppressor comparisons. He also hunts.

 

[Lawnboi]

maybe it’s different for people paying the subscription but the pew science stuff does nothing at all for me, I do not see how any of it is relevant

Is it different for those paying?

 

[ResearchinStuff]

Really lawnboi? The sound traces, first round pop illustrations, dB ratings, back pressure ratings etc don't help you see the differences between cans at all? Or the bar graphs showing how the can compares to other similar ones?

I spent quite a bit of time reading the free version, I found it very helpful. Not sure what the paid version could add really.

 

[Lawnboi]

Really lawnboi? The sound traces, first round pop illustrations, dB ratings, back pressure ratings etc don't help you see the differences between cans at all? Or the bar graphs showing how the can compares to other similar ones?

I spent quite a bit of time reading the free version, I found it very helpful. Not sure what the paid version could add really.

A lot of the cans I want to see tested, he won’t test because they won’t pay.

While the comparison is nice, it’s mostly information overload on stuff that really is not the most important to me.

If I could see how stuff is being tested and then explain the how and why it would probably get me to read more, but as it sits it seems to me like it’s no different than x brand saying it suppresses down to x amount.

I just havnt gotten anything out of it, and I have visited more than a few times. I also won’t pay for information that In the grand scheme means nothing.

 

[tallbuchholz]

Nope. I use multiple from multiple companies. “Best” is probably using CGS’s, but others are functionally fine.

The CGS website says their 1/2-28 adapter is only for 5.56mm. https://cgsgroup.com/product/hyperion-thread-adapter/
I have a 6.5mm barrel threaded at 1/2 and I want to put that adapter on it (adapter is currently on a .22-250 and working great). Is that just CGS being cautious or is the inside diameter at the end of the adapter too small for the 6.5?

 

[Juan_ID]

The CGS website says their 1/2-28 adapter is only for 5.56mm. https://cgsgroup.com/product/hyperion-thread-adapter/
I have a 6.5mm barrel threaded at 1/2 and I want to put that adapter on it (adapter is currently on a .22-250 and working great). Is that just CGS being cautious or is the inside diameter at the end of the adapter too small for the 6.5?

I am not quite sure the diameter or specifics of the cgs adapter but I’ve shot my Hyperion k on square shoulder barrels for thousands of rounds without any issues. Some are 1/2x28 with 5/8 adapter and some are straight 5/8x24.

 

[tallbuchholz]

I am not quite sure the diameter or specifics of the cgs adapter but I’ve shot my Hyperion k on square shoulder barrels for thousands of rounds without any issues. Some are 1/2x28 with 5/8 adapter and some are straight 5/8x24.

Sounds good, I'll just use a regular adapter and not mess with theirs. Thanks.