Cold Bore Challenge Q&A Thread

Status
Not open for further replies.

Megalodon

Lil-Rokslider
Joined
Dec 8, 2019
Messages
276
Just have some probably dumb qualifying questions. I've read the whole thread, but was following along as it went, so maybe don't remember.

Shots have to be taken after 8:00 MTN June 3rd? So I can't shoot the afternoon of June 1st or 2nd and post that June 3rd.

What qualifies as "practice?" Any shooting at all? So if I want to shoot the NRL Hunter match in UT June 16/17/18 I need to be complete with the CBC before that?
 
OP
Justin Crossley

Justin Crossley

Administrator
Staff member
Joined
Feb 25, 2012
Messages
7,527
Location
Buckley, WA
Just have some probably dumb qualifying questions. I've read the whole thread, but was following along as it went, so maybe don't remember.

Shots have to be taken after 8:00 MTN June 3rd? So I can't shoot the afternoon of June 1st or 2nd and post that June 3rd.

What qualifies as "practice?" Any shooting at all? So if I want to shoot the NRL Hunter match in UT June 16/17/18 I need to be complete with the CBC before that?

You can start shooting as early as you like on June 3rd and post the first shot that day after 8:00 am.

Practice is any rifle shooting, so you would need to complete the challenge before the match or start after the match.
 

BBob

WKR
Joined
Jun 29, 2020
Messages
4,425
Location
Southern AZ

Attachments

  • Rokslide 2023 Cold Bore Challenge Official Rules Amended Clarifications B.pdf
    50.9 KB · Views: 26
Last edited:
Joined
Feb 25, 2012
Messages
895
Location
South Dakota
845e19fa1b186a3488d1e4d0a12ad525.jpg

My current target layout. Probably hard to see targets but they seemed to be glowing this morning with the sun hitting them, white dots. Close to far is 370, 515, 670 and 907.

Didn’t fire a lot of rounds this morning but reaffirmed that calling wind does matter. My 907 target is an 18” plate with a 10” circle painted. Cold bore hit steel but not 10”, just out. Wind was light, 3 mph tops, left to right. Had to hold .6 mil for a center hit.


Sent from my iPhone using Tapatalk
 

robby denning

Administrator
Staff member
Joined
Feb 25, 2012
Messages
15,687
Location
SE Idaho
OK, I got out this morning for my first Cold Bore prep.

Equipment:
Christensen Arms Summit Ti in 270WSM
Swarovski Z5
Ammo is Unknown Munnitions, Bertrand Brass, 140 Berger Classic Hunter ontop of 63.5 gr R19 cooking at 3249fps on the chrono

The farthest I’ve ever killed a deer at is 450, so I was going to choose 500 MER (don’t want Sam breathing down my neck lol).

From the bench, I checked zero at 200 (my center hash) from last fall. Shoot sub-MOA at 1.75” for 3 shots but found I was about 3 clicks high at 200 so I adjusted.

Then moved to 500 and switched to 2-shot groups, first two groups from bench, then went to prone using my pack, and a rear bag, (same gear I’ll use for the official CBC) for the rest of the session.

But even in light winds (5-10 measured) this morning, and not cold bore, I was only 50% keeping in the 10” vital.

So I pulled up the target to 450 and put 3 out of 4 in over (2) 2-shot groups shot 20 minutes apart.
Noted that my group sized continued to shrink the more I shot.

My thoughts:

Like Cold Bow, the practice shots after a cold bore do make a difference, you get better, even if it’s slightly

I’m not ready for 500 MER. Need to do a few more true Cold Bore sessions at 450 and if I hit 100%, I’ll think about 500.

MIght have to wait for opening day of CBC to decide becuase if winds are high that even 450 isn’t doable, I’d need to pass that day. I can’t win anything so that doesn’t really matter, but a member would be in a pickle in the even the challenge is filling up. We deal with this in the Cold Bow on windy days and I’ve had to skip days as per the rules, you can’t shrink your MER due to wind so you gotta wait.

In all, super exctied to do this after this morning, although it showed in CBC fashion that it’s gonna be harder than many of us imagine.

Pics below. Top one is from last year at same range/same gun becuase I forgot to snap a pic this morning.

IMG_0463.jpeg


Here is the target. Tapes cover holes and are noted which group. Confusing but the more I shot the smaller my 2-shot groups got, and there are 3 different yadages on that target: 200, 500, 450. The black circle was added digitally as it was too hard to see my 10” ballpoint pen circle. Ignore the black dots and the muzzleloader hole in the 3” bull—recycled targetIMG_4442.jpeg
 
Last edited:

sndmn11

"DADDY"
Joined
Mar 28, 2017
Messages
10,356
Location
Morrison, Colorado
The farthest I’ve ever killed a deer at is 450, so I was going to choose 500 MER (don’t want Sam breathing down my neck lol).


I’m not ready for 500 MER. Need to do a few more true Cold Bore sessions at 450 and if I hit 100%, I’ll think about 500.

Even 400 is a long poke.

Was your 450yd deer one shot, or multiple?
 

mcr-85

WKR
Joined
May 28, 2014
Messages
1,125
Location
Southern Utah
A general question for most folks here....Are you going to push your MER just passed what you have successfully killed animals at?

I have killed a bull at 748 and a buck at 710 (buck was the 2nd shot, I shot a touch over him the first shot) . I shot a lot more rounds back then. I don't know if I could make those shots now.

Sent from my SM-S908U using Tapatalk
 
Status
Not open for further replies.
Top