What did you do in the reloading room today?

[Torque]

Get the Ingenuity trickler for that V3. It really works well with it.

I have been on the wait list for their dispenser to come out. So far, I haven't seen anything. Hopefully it will come out soon.

 

[Dos XX]

I have been on the wait list for their dispenser to come out. So far, I haven't seen anything. Hopefully it will come out soon.

If you already have the V3, you just need the trickler. I think they have those. I have had mine for a couple of years.

 

[Torque]

If you already have the V3, you just need the trickler. I think they have those. I have had mine for a couple of years.

I have been waiting to spend the money on the IG full machine. I didn't want to buy twice. I am glad you like yours.

 

[sportsmans challenge]

Put together a 223 wylde after tearing apart the old 22 grendel I got back from a friend. Loaded some rounds for it with the 69 tmk and varget.

After range threw the brass in the tumbler.

Been processing a bunch of range brass 9mm and 223 for a couple days, then this afternoon decided I don't want to use that and ordered 500 pcs of new 223 starline. So may either recycle, pass along this brass or just toss to the side for a while.

 

[WKR]

Loading some 570 in the 257M to see what accuracy looks like at 67.3 gr. Should be up around 3130-3140 fps according to my pressure test

 

[wapitibob]

Loading some 570 in the 257M to see what accuracy looks like at 67.3 gr. Should be up around 3130-3140 fps according to my pressure test View attachment 828312

How accurate does that thing dispense N570? I cut kernels on occasion because most are .1gr in size.

 

[WKR]

How accurate does that thing dispense N570? I cut kernels on occasion because most are .1gr in size.

Pretty good, I had a couple over throws that came out at 67.34 (0.04 over) but at this point in load dev I still shoot them

 

[Huntinfool72]

Loading up some 300 win mag! Been too long since I've been in the reloading room!

 

[The_Crab_Slayer]

Just getting started reloading. I have a small office that I have converted one side to reloading/rifle work bench. Here is my set up so far, still trying to get everything organized. I went and shot my first 20 rounds of hand loads today.

 

[wapitibob]

Chopped the barrel to 20" for something to do, then screwed around with different loads and messed everything up. Got it back to shooting OK, and shot a 200 zero last week. Went out today to check drops.





Took off 1 click after the 1st shot at 800

 

[The_Crab_Slayer]

Chopped the barrel to 20" for something to do, then screwed around with different loads and messed everything up. Got it back to shooting OK, and shot a 200 zero last week. Went out today to check drops.

View attachment 830028

View attachment 830031

Took off 1 click after the 1st shot at 800
View attachment 830032

Sure looks like COSSA to me!

 

[sportsmans challenge]

Over the past couple days annealed nearly 2 gallons of 223 brass, tumbled that and 1 gallon or more of 9mm.

Been working on some loads for a 16" 223 wylde using 69 tmks.

Chopped a handguard down in length.

 

[wapitibob]

Brass for next barrel showed up today. I wasn't expecting this much shrinkage.

7STW - 7PRC

 

[jfk69]

Brass for next barrel showed up today. I wasn't expecting this much shrinkage.

7STW - 7PRC

View attachment 830494

I have this issue when swimming in cold water…

 

[sierracharlie338]

I have this issue when swimming in cold water…

As long as it doesn’t turn into an innie you aren’t looking like a turtle in his shell.

 

[MCF]

Tried to figure out which shell holder for the press and the FA hand primer to use for a new to me caliber…6.5 PRC.
I CANT FIND ANY INFO ON THIS! None of the charts show the 6.5prc. Called FA and they don’t make one.
Went ahead and sized some new brass with the same holder I use for the 270 Wby…

 

[sportsmans challenge]

Brass for next barrel showed up today. I wasn't expecting this much shrinkage.

7STW - 7PRC

View attachment 830494

It was cold that night

Friday After Next (2002) clip with quote It was cold that night Yarn is the best search for video clips by quote. Find the exact moment in a TV show, movie, or music video you want to share. Easily move forward or backward to get to the perfect clip.

memes.getyarn.io

 

[Peterf225]

I was able to get some test loads together for a new to me 357 max encore barrel.

 

[JF_Idaho]

Tried to figure out which shell holder for the press and the FA hand primer to use for a new to me caliber…6.5 PRC.
I CANT FIND ANY INFO ON THIS! None of the charts show the 6.5prc. Called FA and they don’t make one.
Went ahead and sized some new brass with the same holder I use for the 270 Wby…

Should be the same as 300WM

 

[WKR]

Got some Eld-Missiles loaded up