UM TIKKA Scope Rings

[Unknown Munitions]

All 30MM Medium scope rings shipped today. Keep in mind that 30MM Low with 50MM objective only work with factory Tikka steel barrels. If you have an aftermarket steel or carbon barrel installed you will need the 30MM Medium. Returns and exchanges are always accepted at Unknown Munitions without penalty.

 

[BHanson]

Can’t wait for the 35mm to ship. Gonna look real nice on the 280ai.

 

[TxLite]

Keep in mind that 30MM Low only work with factory Tikka steel barrels. If you have an aftermarket steel or carbon barrel installed you will need the 30MM Medium.

Is this in reference to 50mm objectives or did something change since the chart was created?

 

[Unknown Munitions]

Is this in reference to 50mm objectives or did something change since the chart was created?

Yes, 50MM objective only. Note added to product.

 

[MidGAHunter]

All 30MM Medium scope rings shipped today.

@Unknown Munitions If someone ordered a couple sets of 30 mm lows AND a set of 34 mm lows, will they ship separately? I ask because I have not received a shipping notification for my 30 mm lows yet.

 

[11Justin22]

Got mine mounted. Left space for the level on the back ring. Had a little shipping snafu and it didn't show up but it is on the way. I used form's recommendations for the torque specs. Did not use the pins, really couldn't with the way I had it set. Not worried about it. Just a thought but a "threaded" pin meaning threads on one end and smooth on the other would have opened up a ton of possibilities.

 

[atmat]

View attachment 578342View attachment 578343View attachment 578344
Got mine mounted. Left space for the level on the back ring. Had a little shipping snafu and it didn't show up but it is on the way. I used form's recommendations for the torque specs. Did not use the pins, really couldn't with the way I had it set. Not worried about it. Just a thought but a "threaded" pin meaning threads on one end and smooth on the other would have opened up a ton of possibilities.

On your front rail, it looks like you could use the pin in the in the big egg-shaped hole.

But I thought the same thing about the half-threaded pin.

 

[Hunter609]

If I ordered 30 med this morning and the level when will they ship out? @Unknown Munitions

 

[Unknown Munitions]

@Unknown Munitions If someone ordered a couple sets of 30 mm lows AND a set of 34 mm lows, will they ship separately? I ask because I have not received a shipping notification for my 30 mm lows yet.

Generally yes, we wait until all products are in stock before shipping if it's a relatively short wait. Shoot an email to [email protected] and Robert will handle it for you.

 

[Unknown Munitions]

If I ordered 30 med this morning and the level when will they ship out? @Unknown Munitions

Today (Friday), Monday at the latest depending on order volume and que.

 

[Unknown Munitions]

View attachment 578342View attachment 578343View attachment 578344
Got mine mounted. Left space for the level on the back ring. Had a little shipping snafu and it didn't show up but it is on the way. I used form's recommendations for the torque specs. Did not use the pins, really couldn't with the way I had it set. Not worried about it. Just a thought but a "threaded" pin meaning threads on one end and smooth on the other would have opened up a ton of possibilities.

They look awesome! Can you explain a bit more about the threaded pins? I was obsessing a bit over the pins initially for ring placement but after they passed all tests without pins I wasn't worried about it too much.

 

[beerbucksducks]

I guess I should buy a Tikka.

Sent from my iPhone using Tapatalk

 

[atmat]

They look awesome! Can you explain a bit more about the threaded pins? I was obsessing a bit over the pins initially for ring placement but after they passed all tests without pins I wasn't worried about it too much.

He’s saying that if you threaded half of the pin, you could then use the pin in the screw holes of the receiver as well — which opens up more mounting options since there’s additional holes.

 

[Lytro]

These look great! I Wish I would've looked at this thread prior to ordering a pic rail and rings last week, and especially before I ordered brass from UM. Lol

 

[atmat]

Very loose mock-up to figure out spacing:

 

[TxLite]

Very loose mock-up to figure out spacing:

That is a great looking setup

 

[11Justin22]

He’s saying that if you threaded half of the pin, you could then use the pin in the screw holes of the receiver as well — which opens up more mounting options since there’s additional holes.

They look awesome! Can you explain a bit more about the threaded pins? I was obsessing a bit over the pins initially for ring placement but after they passed all tests without pins I wasn't worried about it too much.

Yes exactly as atmat described. Something like this.

 

[Unknown Munitions]

I guess I should buy a Tikka.

Sent from my iPhone using Tapatalk

Great combo!

 

[Unknown Munitions]

He’s saying that if you threaded half of the pin, you could then use the pin in the screw holes of the receiver as well — which opens up more mounting options since there’s additional holes.

Good copy, I understand now and will bring this info to the team.

 

[Unknown Munitions]

Very loose mock-up to figure out spacing:

Looking awesome, I love the level position of this setup.