Ultralight Ultralight Rifles

[Thegman]

Anyone cut their own BCG down?
Cutting wheel, tungsten carbide hacksaw, something else?

@StupidLightweight has, years ago, maybe he can chime in.

 

[StupidLightweight]

I’ve only chopped aluminum carriers. Easy with a hacksaw. A nitrided steel carrier would be a pain in the grass manually. A chop saw with tough blade could do it though. Once chopped, file it smooth and you’re done.

 

[Taudisio]

WTS - Leupold VX-3 2.5-8x36 Duplex

Up for sale is a Leupold 2.5-8x36 scope with standard duplex reticle. It has a few scuffs as shown in the photos, and the rubber eye ring has degraded a little, but is otherwise in great shape. Glass appears to be flawless. One of the great do-it-all gold ring scopes. $325 shipped.

rokslide.com

I just saw this was posted for anyone shopping for a scope. It doesn’t have the bdc reticle though.

 

[KyleR1985]

.223 Lake City Processed Brass Standard Grade (250CT)

sagesreloadingsupply.com

Looks like he’s got 7 packs of 250 in stock.

I bought 500, and after shipping they were 16 cents a piece.

I’m very happy with the purchase. I’ve had maybe 5 out of 200 not want to take a primer. Threw them to side and cleaned them up later back in rotation.


If anyone’s wondering, every time I’ve checked water capacity with this brass, it’s +31g.

Could have something to do with why I’m getting 2900 out of the mini 16” with 77tmk and lever haha.

 

[4090Sharps]

.223 Lake City Processed Brass Standard Grade (250CT)

sagesreloadingsupply.com

Looks like he’s got 7 packs of 250 in stock.

I bought 500, and after shipping they were 16 cents a piece.

I’m very happy with the purchase. I’ve had maybe 5 out of 200 not want to take a primer. Threw them to side and cleaned them up later back in rotation.


If anyone’s wondering, every time I’ve checked water capacity with this brass, it’s +31g.

Could have something to do with why I’m getting 2900 out of the mini 16” with 77tmk and lever haha.

This is where I tend to get prepped brass as well. Occasionally the primer pockets are a little too tight still from the crimps, but otherwise, no complaints. Not usually an issue if I prime by hand, but can be on my progressive.

 

[KyleR1985]

This is where I tend to get prepped brass as well. Occasionally the primer pockets are a little too tight still from the crimps, but otherwise, no complaints. Not usually an issue if I prime by hand, but can be on my progressive.

Nice to wake up and see that all 7 of those bags sold out between that message getting posted and 5am this morning!

 

[Thegman]

Nice to wake up and see that all 7 of those bags sold out between that message getting posted and 5am this morning!

Even by around 9PM PST last night...I didn't need any, but looked and they were sold out.

 

[Welldone]

Hello guys
I have finally gotten my rifle assembled. FA CF lower, SOLO 300 upper, Shaw barrel,etc.
I loaded up a magazine of Blackhills 77 TMK. Boy, is something wrong! Very rough back and forth and would only pick up half of a mag and the other half would get stuck in the chamber. Lubed up the receiver and bolt and got “ decent” action. When I took the upper back off, the action is much better. I see wear marks inside the receiver from bolt. It’s probably something really simple that Im not seeing. Anybody have in advise ?

 

[packgoatguy]

Hello guys
I have finally gotten my rifle assembled. FA CF lower, SOLO 300 upper, Shaw barrel,etc.
I loaded up a magazine of Blackhills 77 TMK. Boy, is something wrong! Very rough back and forth and would only pick up half of a mag and the other half would get stuck in the chamber. Lubed up the receiver and bolt and got “ decent” action. When I took the upper back off, the action is much better. I see wear marks inside the receiver from bolt. It’s probably something really simple that Im not seeing. Anybody have in advise ?

What mag? And did you use any grease on the BCG or something like clp?

 

[Welldone]

CLPish type dry lube. Grease better?

 

[packgoatguy]

CLPish type dry lube. Grease better?

I use grease. There were some posts here about it last year.

 

[Thegman]

Hello guys
I have finally gotten my rifle assembled. FA CF lower, SOLO 300 upper, Shaw barrel,etc.
I loaded up a magazine of Blackhills 77 TMK. Boy, is something wrong! Very rough back and forth and would only pick up half of a mag and the other half would get stuck in the chamber. Lubed up the receiver and bolt and got “ decent” action. When I took the upper back off, the action is much better. I see wear marks inside the receiver from bolt. It’s probably something really simple that Im not seeing. Anybody have in advise ?

Also, have you worked on the feed ramps on your barrel extension? Without doing that, 223s will often feed poorly in the Solo. It doesn't have the "force feeding" a gasser does.

Ultralight Ultralight Rifles

I went looking for the magazine with the lightweight article in it, and couldn.t find one on the news stands. I ordered one online. Yes, that's the previous issue, one behind the current issue out now. I think the only way to buy it at this point is online. Same price as the news stand.

rokslide.com

 

[Trackselk]

Also, have you worked on the feed ramps on your barrel extension? Without doing that, 223s will often feed poorly in the Solo. It doesn't have the "force feeding" a gasser does.

Ultralight Ultralight Rifles

I went looking for the magazine with the lightweight article in it, and couldn.t find one on the news stands. I ordered one online. Yes, that's the previous issue, one behind the current issue out now. I think the only way to buy it at this point is online. Same price as the news stand.

rokslide.com

I assume with a gasser that they basically polish themselves? I definitely have little scratches down the bullets and brass, all the way to the case head. My feeding is rough, but never hangs up.

 

[4090Sharps]

Hello guys
I have finally gotten my rifle assembled. FA CF lower, SOLO 300 upper, Shaw barrel,etc.
I loaded up a magazine of Blackhills 77 TMK. Boy, is something wrong! Very rough back and forth and would only pick up half of a mag and the other half would get stuck in the chamber. Lubed up the receiver and bolt and got “ decent” action. When I took the upper back off, the action is much better. I see wear marks inside the receiver from bolt. It’s probably something really simple that Im not seeing. Anybody have in advise ?

At the risk of asking something that you may think obvious, is your bolt aligned to the barrel extension?

Depending on how you install the barrel, the barrel alignment pin can bend or break, or the receiver can bend, knocking the barrel out of natural alignment.

 

[Welldone]

M tired of messing with it tonight BUT I think that I may have stumbled onto something. The rear takedown pin area on this plastic lower is cockeyed. I’m gonna slowly remove some material tomorrow and see if the upper/ lower fitment loosens up a little. I always want a “tight “ precision fit but then I thought……….. this is plastic!!!!!!!!
We’ll see