Tikka in PRS/Nrl hunter/etc

[RyanT26]

For those of you using Tikka‘s with the standard bottom metal in shooting matches that require more than three rounds. Do you just have your mags setting out ready to go?
Does anybody make a reliable five or 10 round magazine for the standard Tika bottom metal?

 

[Brontosaurus]

Waters mags are popular with many on here.

 

[Q_Sertorius]

The Waters and the NDR magazines are the reliable 10-round magazines for medium or long action cartridges.

There is a thread about doing a group buy for the Waters magazines.

We’re doing another Waters Rifleman group buy
https://r.tapatalk.com/shareLink/to...roup-buy.405616/&share_type=t&link_source=app

The Mambamags are good for .223.

I would not get an MDT magazine.

 

[id_jon]

Tikka makes a 5 round mag. I've shot a few hunter matches with it. If you need more than 5 rounds on an NRL stage, a mag change is the least of your worries usually . I keep my 3 rounder in my bino harness and a 2 round holder on the gun, usually would just pop a round in from the 2 round holder and that would suffice.

 

[lintond]

Tikka makes a 5 round mag. I've shot a few hunter matches with it. If you need more than 5 rounds on an NRL stage, a mag change is the least of your worries usually . I keep my 3 rounder in my bino harness and a 2 round holder on the gun, usually would just pop a round in from the 2 round holder and that would suffice.

This

If you’re trying to be truly competitive going to an aics platform is advisable, however most are really there for fun/practice etc. Redsnake has a aics bottom metal that fits in a factory inlet with a minor mod to the stick inlet with a file.


Sent from my iPhone using Tapatalk

 

[Lawnboi]

You could also try to find a take off ctr stock.

The most annoying part of the factory tikka plastic mags is having them pop out when you are using a front bag.

 

[RyanT26]

Thanks for the leads. Most of the matches in the area are more PRS-based than NRL hunter, but I’m not trying to be competitive in either. Just shoot more.

 

[hereinaz]

Thanks for the leads. Most of the matches in the area are more PRS-based than NRL hunter, but I’m not trying to be competitive in either. Just shoot more.

Get a Bravo or Field stock for it. Has AICS bottom metal. Best mag system for PRS where you will want 10 round mags.

 

[TX_Diver]

I have 2 3rd mags and the Velcro SAP 2 round holder. Works better than 3 mags which I tried originally.

Works for me but I am not competitive and just shoot for fun/practice.

A bravo and aics mag is not that much more $$ than 2x 10rd mags. Im considering that for the future if I want to play the game a bit more

 

[Lawnboi]

I am pretty sure all one would need is the CTR bottom metal, and drop the mag retention spring from the trigger group. Then could run factory CTR mags or modded AICS polymer mags.

The bottom metal inlet is the same for the Lite and CTR.

I think the bottom metal inlet is slightly different. Maybe not, I havnt had one in a while.

 

[benconfused]

The Waters and the NDR magazines are the reliable 10-round magazines for medium or long action cartridges.

There is a thread about doing a group buy for the Waters magazines.

We’re doing another Waters Rifleman group buy
https://r.tapatalk.com/shareLink/topic?share_fid=45046&share_tid=405616&url=https://www.rokslide.com/forums/index.php?threads/We’re-doing-another-Waters-Rifleman-group-buy.405616/&share_type=t&link_source=app

The Mambamags are good for .223.

I would not get an MDT magazine.

For a 223 build, is it worth going the Waters route, or stick with Mambas?

 

[Q_Sertorius]

For a 223 build, is it worth going the Waters route, or stick with Mambas?

I would stick with Mambas.

 

[ColPenguin]

I think the bottom metal inlet is slightly different. Maybe not, I havnt had one in a while.

Just confirmed. The CTR magwell is wider than standard inlet. You're right, I was wrong.