Swfa zero stop shims ?

[pods8 (Rugged Stitching)]

I designed my own similar to those. I had them printed. They work pretty well.

Nice job.

 

[Eluder]

Anybody up for designing some for the 3x9?

 

[doverpack12]

Anyone want to explain how this works? I’ve seen a lot of posts but never messed with SWFA zero stop. Now I have a 6x and would like to add a stop.

 

[BBob]

Anyone want to explain how this works? I’ve seen a lot of posts but never messed with SWFA zero stop. Now I have a 6x and would like to add a stop.

 

[pods8 (Rugged Stitching)]

Anyone want to explain how this works? I’ve seen a lot of posts but never messed with SWFA zero stop. Now I have a 6x and would like to add a stop.

Baseline description: The turret cap is a closed end tube that is placed over a smaller diameter tube extending up from the scope body with the dialing mechanism inside this tube. Clear?

They fit up in the cap and bump against the tube extending up from the scope body limiting how far down you can dial (which lowers the cap down and creates more overlap).

 

[Loper]

The turret and shims should be the same on the SWFA SS 6X, 10X, and 3-15X. The HD 3-9 turrets are shorter and a different diameter.

Good to know. Thank you.

Anyone have a file that can be printed or a solution for the 3-9x42?

 

[passinggas33]

Is it possible to do anything like this to the 2.5-10x32? Not being able to return to zero if I dialed is my only complaint about that scope.