Show your Tikka ten round groups

Joined
Mar 16, 2021
Messages
3,440
Location
Western Iowa
Barrel mirage was a thing for you.
I didn’t notice any mirage this time and had a decent sight picture in a budget scope. However, I did struggle getting the corn hole bags and bipod just right shot to shot on the uneven ground. Between that and the sweat, bugs, and time crunch I was under, I was very satisfied with these results.

This was a pretty stressful situation shooting off the dirt in the heat. This rifle was very “forgiving” to shoot with an imperfect rest, cheek weld, etc., and I’m looking forward to future sessions with handloads at the actual range instead of my backyard.

17 of the 20 rounds fall into a pretty ragged 4” square with multiple rounds touching. 11 fall inside approximately 1”. So while total MOA for these 20 rounds isn’t great, I’ll own the handful of shots off target and not blame the equipment.
 

Rooggvc

WKR
Joined
Aug 8, 2022
Messages
611
Today I think I had cold shooter syndrome. I warmed up by my 3rd group. It was only 8 rounds though.
 

Attachments

  • IMG_4877.jpeg
    IMG_4877.jpeg
    244.2 KB · Views: 70
Joined
Jan 1, 2022
Messages
450
Location
Montana
First day at the range with a 24” stainless CTR. Bought it yesterday, mounted an SHV 3-10 and grabbed a box of Precision Hunter. Shots 8-18 through the brand new barrel went just barely under an inch at 100 yards. 92 degrees in direct sunlight, two barrel cleanings down to bare metal (one before shot 8, one after shot 13), 6mph breeze, no wait time between shots other than to jack one in and get back on target… that’s all just to say, no voodoo. She doesn’t appear to be picky and I’m curious what will happen as I continue shooting it.

1693272488937.jpeg
 
Last edited:

ztc92

Lil-Rokslider
Joined
May 8, 2022
Messages
281
I liked my 20” CTR in 6.5CM how it came from the factory but I love it after adding a supressor (Harvester Evo) and putting it in a KRG Bravo.

Both groups are handloads with 43.5g of H4350 in Starline SRP brass. Shot the left group first with 130 ELDM’s and then after adjusting right 0.1 mil, proceeded to shoot the right group with 130 TMK’s.

It’s heavy but damn if it isn’t a dream to shoot!
 

Attachments

  • IMG_7098.jpeg
    IMG_7098.jpeg
    413.3 KB · Views: 41

PineBrook413

WKR
Shoot2HuntU
Joined
Nov 26, 2020
Messages
625
Location
Northeast
7prc Tikka - proof pre-fit
stockys VG2 stock & TI brake

1.2" - 10 shot 100 yards
175elx @ 2980fps
Holds approx 1-1.5moa out at 1000yards confirmed on multiple range trips with minimal wind.

Target is .1 mil squares.
 

Attachments

  • IMG_2965.jpg
    IMG_2965.jpg
    19.7 KB · Views: 34

AKG

FNG
Joined
Jan 23, 2020
Messages
88
Location
WI
2 consecutive 9 shot groups with a range of cartridge oal's to see how things changed (no significant change in velocity or impact), Tikka liteweight stainless. 22-250, 1:8 twist. 77tmk, new lapua brass, 39.0 grains superformance.
 

Attachments

  • Ballistic-X-Export-2023-09-10 18_44_55.573177.png
    Ballistic-X-Export-2023-09-10 18_44_55.573177.png
    849.7 KB · Views: 58
  • Ballistic-X-Export-2023-09-10 18_42_09.078511.png
    Ballistic-X-Export-2023-09-10 18_42_09.078511.png
    809.8 KB · Views: 58

mrh1958

FNG
Joined
Sep 14, 2023
Messages
11
Here’s a few of mine:

Tikka T1X, KRG Bravo, SWFA 3-9, SK standard plus. 50 yards

fe2c075b6d221f48507a67e469419e15.jpg



T3X SuperLite 223, SWFA 3-9, bone stock except addition of vertical grip. 100 yards

d75cccd0074832002b772d5daef2c152.jpg



Sent from my iPhone using Tapatalk

Good shooting with that T1X, mine shoots well also.
 
Top