Questions for Form and other "small caliber for big game" folks

[LONE HUNTER]

The rifle I mentioned above is what the light grey stock gun is. Factory tikka action and barrel threaded from the factory. It absolutely hammers 95 SST factory ammo as well as 103 ELDX and 108 ELDM hand loads. It now wears a suppressor and is a dream to shoot and carry.

View attachment 805049

Looks like a roughtec? I think I did see one of those on euro optic. The forums seem to think that it could need some work on the throat for longer bullets like the 108? Honestly tho if it would shoot the 103s that would be perfect.

 

[mxgsfmdpx]

Fouling a barrel is very different from a dirty barrel. Fouling is a great idea, especially after cleaning. A dirty barrel is full of reasons that affect accuracy and the integrity of the barrel - a really dirty barrel may even affect pressures and bullet seating.

You need to use guns and barrels that don’t suck and aren’t picky about seating and pressure. I like to use stuff that works personally.

Over 15,000 rounds on this action and closing in on 8,000 on this factory 20” Tikka barrel. Never has a single patch ran through it. It still does this every time I shoot it for “groups” at 100 yards.

This was back when I switched from 73 ELDM to 77 TMK. New scope/rings, new stock, and a fresh brake clean wipe down and lightly oiled bolt. 2 sight in shots on the right and then 48 shot group to finish off the box of ammo on the left.

 

[mxgsfmdpx]

Looks like a roughtec? I think I did see one of those on euro optic. The forums seem to think that it could need some work on the throat for longer bullets like the 108? Honestly tho if it would shoot the 103s that would be perfect.

I honestly don’t know which model it is sorry. It’s one of the stainless cerakoted models.

UM loaded up ammo for me no issues that I’m aware of with both 108 and 103.

 

[mxgsfmdpx]

Tikka .22-250 rechambered to 22 Creedmoor with factory tikka stainless barrel. This is a chambering that “shoots barrels out and quickly fouls out barrels” or so I’ve read on the internet…

1,100 rounds and it’s never been cleaned. 20
Shot 100 yard group from yesterday in 15-30 mph 8-9 o clock winds.

I have dozens of examples of guns like these and can keep providing real world examples instead of internet hearsay.

 

[pods8 (Rugged Stitching)]

Oh?! Why is that? Recoil?

Cause the Tikka is a good platform at a reasonable price compared to others that currently offer 6cm.

A 243win and a 6cm are very similar in capacity with the 243win being larger so if loaded with the same bullet to the same pressure it’d have a minuscule more recoil all else being equal.

 

[Article 4]

You need to use guns and barrels that don’t suck and aren’t picky about seating and pressure. I like to use stuff that works personally.

Over 15,000 rounds on this action and closing in on 8,000 on this factory 20” Tikka barrel. Never has a single patch ran through it. It still does this every time I shoot it for “groups” at 100 yards.

This was back when I switched from 73 ELDM to 77 TMK. New scope/rings, new stock, and a fresh brake clean wipe down and lightly oiled bolt. 2 sight in shots on the right and then 48 shot group to finish off the box of ammo on the left.


View attachment 805064

Another pristine looking Tikka with a Rokstok, and a Maven. You are consistent, just remember to leave some of the cooler water for the rest of us.

 

[Article 4]

Tikka .22-250 rechambered to 22 Creedmoor with factory tikka stainless barrel. This is a chambering that “shoots barrels out and quickly fouls out barrels” or so I’ve read on the internet…

1,100 rounds and it’s never been cleaned. 20
Shot 100 yard group from yesterday in 15-30 mph 8-9 o clock winds.

I have dozens of examples of guns like these and can keep providing real world examples instead of internet hearsay.

View attachment 805067

View attachment 805066
View attachment 805068

That rifle looks pristine for one that has never been cleaned. Nice job

 

[mxgsfmdpx]

You are a funny human

I used to share your same thoughts on many things related to firearms and also thought I knew everything. I also had great success using that methodology for decades.

That doesn’t mean that something else, that’s way easier, and may be better, doesn’t also work.

 

[mxgsfmdpx]

That rifle looks pristine for one that has never been cleaned. Nice job

You should look at it a little closer haha. One of my old PRS buddies commented on how filthy it was a few weeks ago, I thought it looked pretty nice personally.

That photo was from after a fresh wipe down after elk blood and dust/dirt was on it from a hunt a couple weeks back

 

[Article 4]

I used to share your same thoughts on many things related to firearms and also thought I knew everything. I also had great success using that methodology for decades.

That doesn’t mean that something else, that’s way easier, and may be better, doesn’t also work.

Nice passive aggressive dig
everything. nope but learning along the way for sure

My background is probably as deep or deeper than some of the “experts” here. especially when it comes to rifle barrels. Carbon wrapped barrels specifically. So i’ll keep that knowledge if no one wants it.

 

[fwafwow]

You should look at it a little closer haha. One of my old PRS buddies commented on how filthy it was a few weeks ago, I thought it looked pretty nice personally.

That photo was from after a fresh wipe down after elk blood and dust/dirt was on it from a hunt a couple weeks back

Let's see a picture of the interior of your filthy a$$ barrel!

 

[mxgsfmdpx]

Another pristine looking Tikka with a Rokstok, and a Maven. You are consistent, just remember to leave some of the cooler water for the rest of us.

That was a brand new Stockys stock and brand new scope/ rings as I mentioned. Fresh cleaning of wipe down of the action with brake clean works well you should try it.

 

[Article 4]

That was a brand new Stockys stock and brand new scope/ rings as I mentioned. Fresh cleaning of wipe down of the action with brake clean works well you should try it.

glad it works for you.

I’ll stay with my routine. Been working in the field for 30+ years and through military service.

Don’t fix what isn’t broken.

 

[mxgsfmdpx]

Let's see a picture of the interior of your filthy a$$ barrel!

I tried to get a good one but seem to suck at it. This is 1,100 rounds with only action wipe downs. Just wiped down after a hunt about a week ago or so.

 

[mxgsfmdpx]

glad it works for you.

I’ll stay with my routine. Been working in the field for 30+ years and through military service.

Don’t fix what isn’t broken.

For me, with cleaning specifically it was more of a convenience thing. I was always a lazy cleaner before and hated doing it. Haven’t cleaned a barrel in quite some time now. It’s quite freeing haha.

 

[Schmo]

So i’ll keep that knowledge if no one wants it.

You can feel free to keep it.

 

[Article 4]

For me, with cleaning specifically it was more of a convenience thing. I was always a lazy cleaner before and hated doing it. Haven’t cleaned a barrel in quite some time now. It’s quite freeing haha.

You can feel free to keep it.

Whew thanks. So relieved.

 

[mxgsfmdpx]

Nice passive aggressive dig
everything. nope but learning along the way for sure

My background is probably as deep or deeper than some of the “experts” here. especially when it comes to rifle barrels. Carbon wrapped barrels specifically. So i’ll keep that knowledge if no one wants it.

It wasn’t meant as a dig more just comparing to myself and my older thought processes on firearms topics in general.

I’m not interested in anybody’s “background” or self proclaimed “knowledge depth” sorry. I’d rather just go out and try things for myself and see what happens and report back.

 

[Article 4]

It wasn’t meant as a dig more just comparing to myself and my older thought processes on firearms topics in general.

I’m not interested in anybody’s “background” or self proclaimed “knowledge depth” sorry. I’d rather just go out and try things for myself and see what happens and report back.

Ok. no worries.

Your actions show you follow backgrounds well. you seem to follow quite a bit of knowledge from the influencers here. Apology accepted

 

[texag10]

Another pristine looking Tikka with a Rokstok, and a Maven. You are consistent, just remember to leave some of the cooler water for the rest of us.

That rifle looks pristine for one that has never been cleaned. Nice job

Nice passive aggressive dig

This quote is pretty funny in light of the prior 2 posts.

Not cleaning barrels is delightful. Been shooting ARs without touching the bore for at least a decade.