Dead Air Nomad Ti XC

[HighUintas]

The latest code I received is SPRING for 10%

This is what i ended up using today. It at least saves a few dollars

 

[HighUintas]

Has anyone tried a sico titanium direct thread mount on a nomad xc?

I'm wondering if there is any reason why it wouldn't work.

It would be awesome to not add any length to the ti xc and keep it at 6.3".

 

[Gynaroo]

Has anyone tried a sico titanium direct thread mount on a nomad xc?

I'm wondering if there is any reason why it wouldn't work.

It would be awesome to not add any length to the ti xc and keep it at 6.3".

If it is a standard hub mount it will work. I switched from Xeno to DT for mine. Less weight and for sure less length. But I used the DA DT hub.

 

[HighUintas]

If it is a standard hub mount it will work. I switched from Xeno to DT for mine. Less weight and for sure less length. But I used the DA DT hub.

Yes I know the thread will work, but I was thinking about the depth the muzzle would go into the canyon. Since it is completely flush, it would be at least 1/4" or maybe almost 1/2" further in there compared to the DA direct thread. I wondered that could be a problem.

Sorry, should have been more specific

Edit: the muzzle end would be about 0.4" further in the can using the sico hub DT compared to the DA DT and according to the specs on D As site