Dead Air Nomad Ti XC

[ScreamingPotato]

With the xeno mount or direct thread? Thats a good deal if its with the xeno

It's a great deal either way. The Xeno stuff is cheap at EuroOptic so can be added later. I'm planning to keep everything DT though.

 

[Cameron.25]

It's a great deal either way. The Xeno stuff is cheap at EuroOptic so can be added later. I'm planning to keep everything DT though.

Well im an SOT, so I can see what other dealers margins likely are on these and what the MAP price is set at. For either mount option $930 is below that MAP pricing so you are correct in saying either way its a deal, but I'm still curious if he got the DT or not. Its an even better deal with the xeno obviously. I may get one to test out with xeno just to check out that mount since I've never used one, but like you i always go direct thread personally

 

[Cameron.25]

It's a great deal either way. The Xeno stuff is cheap at EuroOptic so can be added later. I'm planning to keep everything DT though.

So a takeaway from this for you guys, is that if you shop online, typically we aren't allowed to advertise a lower price than the minimum the manufacturer sets. If you have a relationship with a local dealer, you may be able to get a lower price for items than the MAP when shopping in person depending on the dealer.

My understanding from speaking about this with some of my distributors and manufacturers I sell for, is that we can sell cans for lower than the MAP price, as long as we dont advertise lower pricing than MAP to the masses. Sometimes manufacturers allow a sale like a black friday that they set their own perimeters for that we can advertise too but this seems to differ from company to company.

 

[ScreamingPotato]

So a takeaway from this for you guys, is that if you shop online, typically we aren't allowed to advertise a lower price than the minimum the manufacturer sets. If you have a relationship with a local dealer, you may be able to get a lower price for items than the MAP when shopping in person depending on the dealer.

My understanding from speaking about this with some of my distributors and manufacturers I sell for, is that we can sell cans for lower than the MAP price, as long as we dont advertise lower pricing than MAP to the masses. Sometimes manufacturers allow a sale like a black friday that they set their own perimeters for that we can advertise too but this seems to differ from company to company.

Most definitely. In my case I was at the local dealer and he was pushing the XC on me when I went in to pickup a rifle transfer. I would've bought it had they come down to MAP but for some reason they thought they needed an extra $50.

 

[Cameron.25]

Most definitely. In my case I was at the local dealer and he was pushing the XC on me when I went in to pickup a rifle transfer. I would've bought it had they come down to MAP but for some reason they thought they needed an extra $50.

Thats unfortunate and somewhat short sided in my mind, since he missed out on that sale to you in that moment and it also might signal you as the customer that he may not be willing to give you deals in the future as well. I can tell you that there usually is less margins for us dealers on a lot of the 3d printed cans vs most the welded ones, and they're also in high demand so maybe that factored into his decision too, but there was enough meat left on the bone especially at MAP that there's no way I'd have handled it that way !

 

[rileybassman]

With the xeno mount or direct thread? Thats a good deal if its with the xeno

Direct thread. Just double checked the receipt and I paid $935 out the door with a 3% cash discount. They had it on the shelf for $960.

Sent from my SM-S916U using Tapatalk

 

[rileybassman]

So a takeaway from this for you guys, is that if you shop online, typically we aren't allowed to advertise a lower price than the minimum the manufacturer sets. If you have a relationship with a local dealer, you may be able to get a lower price for items than the MAP when shopping in person depending on the dealer.

My understanding from speaking about this with some of my distributors and manufacturers I sell for, is that we can sell cans for lower than the MAP price, as long as we dont advertise lower pricing than MAP to the masses. Sometimes manufacturers allow a sale like a black friday that they set their own perimeters for that we can advertise too but this seems to differ from company to company.

That is correct... My local dealer does not advertise and I can get DA or Nightforce etc. from them cheaper then anywhere online.

Sent from my SM-S916U using Tapatalk

 

[BearGuy]

What other suppressor covers work with this suppressor? Dead air has been sold out for months and the mirage is pretty bad even after only 5 rounds or so

 

[WKR]

What other suppressor covers work with this suppressor? Dead air has been sold out for months and the mirage is pretty bad even after only 5 rounds or so

Armageddon gear has one for the original nomad that works good on the XC

 

[Muledeerfanatic]

I just paid $940 for the L ti
The regular would be under $870

 

[Muledeerfanatic]

Xeno mount

 

[5811]

Bauer precision has nomad ti xc in blk or fde for 855 shipped with code valentine. Even after paying the transfer fee at my shop (100) it's a solid deal.

 

[khuber84]

What other suppressor covers work with this suppressor? Dead air has been sold out for months and the mirage is pretty bad even after only 5 rounds or so

I usually get a burn proof gear cover for all my cans.

 

[Ishootgunssometimes]

Just got back from my first range session with the XC Ti. It’s sweet on my 18” 7 SAUM!

 

[CMP70306]

As khuber stated, the 419 system is left hand thread. Haven't had one come loose so far. Never had one of the hand tightened 419 brakes come loose either.

I run that system as well but since they utilize a taper and an O Ring they are not the same as a standard flat shouldered DT connection that you find on the muzzle of most rifles .

 

[HighUintas]

Are there any 15% off sales that regularly happen every year with any bigger vendors? That coupon code at Bauer was a nice discount but ended yesterday. I'm hoping I can find a discount on one late spring/early summer if I decide to go with the ti xc over UMs reflex suppressor.

It's been noted somewhere above the tone of the ti xc is great. Has anyone been able to compare it to the raptor an with reflex on?

 

[Harvey_NW]

While failures are extremely unlikely on these models, they can be fixed if needed.

Well this is aging like pasteurized milk

What other suppressor covers work with this suppressor? Dead air has been sold out for months and the mirage is pretty bad even after only 5 rounds or so

The fire sleeve is pretty snug but the FHF TAC MTN fits on the OG Nomad.

 

[Megalodon]

My understanding from speaking about this with some of my distributors and manufacturers I sell for, is that we can sell cans for lower than the MAP price, as long as we dont advertise lower pricing than MAP to the masses.

This is standard on basically all things no? That's my MAP stands for Minimum Advertised Price?

 

[WKR]

Well this is aging like pasteurized milk


The fire sleeve is pretty snug but the FHF TAC MTN fits on the OG Nomad.

I believe that quote was regarding 3d printed cans.

 

[Cameron.25]

This is standard on basically all things no? That's my MAP stands for Minimum Advertised Price?

Correct. Just want to be sure folks know its possible to pay less than the MAP on suppressors, even without an official sale going on