Dead Air Nomad Ti XC

[Yung6ix]

it’s a phenomenal can. I kept having random people come up to me and ask what can I was using. Made my 6BRA shooting 109’s sound like a 22LR, hearing safe. On my 6.5cm gasser, not hearing safe, and definitely more gassy than without it.

 

[CMP70306]

Do you load thru it or take the suppressor off to load.

Same. I'm headed this direction soon.

Have to take it off every time with a 45 cal, if you had a 50 cal suppressor they make tubes so that you can load through the suppressor.

This year I’m going to be sending my barrel back to Arrowhead to get rethreaded with 11/16” muzzle threads so I can put Dead Air’s new KeyMo zero mount on it to make it easier to reload.

 

[BBob]

This year I’m going to be sending my barrel back to Arrowhead to get rethreaded with 11/16” muzzle threads so I can put Dead Air’s new KeyMo zero mount on it to make it easier to reload.

I built mine w/11/16" threads.

 

[CMP70306]

I built mine w/11/16" threads.

The you are ahead of the game, standard threads for arrowhead savage prefits are 3/4” x 24 and they didn’t have any 45 cal QD options so I just rolled with it.

 

[Pickettpuncher]

Have to take it off every time with a 45 cal, if you had a 50 cal suppressor they make tubes so that you can load through the suppressor.

This year I’m going to be sending my barrel back to Arrowhead to get rethreaded with 11/16” muzzle threads so I can put Dead Air’s new KeyMo zero mount on it to make it easier to reload.

I’ve got 11/16 as well. I have an early Hankins barrel, thinking it’s a pacnor. 24” savage. I do know they make load thru funnels for the breaks, but wasn’t sure if the can opening was big enough to do the same.

 

[sneaky]

OCL must be limited on production. I have not found a consistent supply of their suppressors. I waited a couple of months for both the Polonium and a Lithium to get back in stock. I would like a Hydrogen L but was told they are not produced very often and not sure when the next run will happen.

One of their guys was killed in a car accident just a couple weeks ago. That's going to affect all of their production for a bit I would think.

Sent from my SM-S918U using Tapatalk

 

[CMP70306]

One of their guys was killed in a car accident just a couple weeks ago. That's going to affect all of their production for a bit I would think.

Sent from my SM-S918U using Tapatalk

More than just a guy, it was the owners brother. From what I got from his instagram page they were working on a car together and the brother took it up the road for a test drive and ended up in a wreck.

I’ve got 11/16 as well. I have an early Hankins barrel, thinking it’s a pacnor. 24” savage. I do know they make load thru funnels for the breaks, but wasn’t sure if the can opening was big enough to do the same.

The OD on the funnels is just under 1/2” so they fit through the 50 cal suppressors but are too wide for the .45 cal ones.

 

[bp78]

Probably more of a general question, but have groups been tighter suppressed or unsuppressed with the Nomad Ti XC?

 

[greyghostnw]

Probably more of a general question, but have groups been tighter suppressed or unsuppressed with the Nomad Ti XC?

Mine have been quite well. Impressive can… on left 185 berger classics on right 185 juggernaut otm factory ca ridgeline 308 20” bedded fft stock.i honestly think its sound is similar to a ocl ti 22 on a 22lr… thats quiet. Great can for hunting timber or river bottom where your hearing is as much as your site.

 

[xebadir]

Put in the paperwork for one of the Nomad XC Tis after reading alot (partly this thread), and feeling one in store. Was on the fence vs that Alaska 360 Ti, but the price differential and that can feeling more tinny compared to the DA swayed me. Planning on using it mainly on a custom 280AI I'm having built.

 

[rileybassman]

I have one on the way as well - pretty excited for it. I have the first gen nomad TI and it's been a great can as well. Love the 3D printed Hyperion K I have... hoping that this will be my go to hunting can moving forward.

 

[stevie]

After reading this, purchased one the other day. Now the wait begins.

 

[Cameron.25]

CAT Noah and Nomad Ti XC should be a bitchin combo for that. Those are the 2 cans i'm most likely to buy next.

The noah works great on a bolt gun, thats all I've shot mine on so far. Not gonna convince you to not try both tho, probably gonna grab an xc myself lol

 

[stevie]

Would the silencerco bravo titanium direct tread work to lighten weight. Also have the Scythe which i believe is hub compatible.

 

[HighUintas]

Would the silencerco bravo titanium direct tread work to lighten weight. Also have the Scythe which i believe is hub compatible.

Yes, I believe someone showed this setup in another thread.

 

[khuber84]

Would the silencerco bravo titanium direct tread work to lighten weight. Also have the Scythe which i believe is hub compatible.

I removed the rear adapter from both my new DA XC AND Lti XC. Installed ti a419 mounts to screw onto a hellfire muzzle device. The a419 muzzle device paired with the a419 ti hub adapter was 0.6oz heavier than just the rear adapter on the XC. Their included muzzle adapter was very heavy. The way to make these the lightest, would be to install a rearden ti direct thread hub adpater they're like 0.7oz, there might be a lighter option available but this is the lightest I've found.

 

[stevie]

Great will need to give it a try once I get the suppressor.

 

[B23]

I removed the rear adapter from both my new DA XC AND Lti XC. Installed ti a419 mounts to screw onto a hellfire muzzle device. The a419 muzzle device paired with the a419 ti hub adapter was 0.6oz heavier than just the rear adapter on the XC. Their included muzzle adapter was very heavy. The way to make these the lightest, would be to install a rearden ti direct thread hub adpater they're like 0.7oz, there might be a lighter option available but this is the lightest I've found.

Wish I would have done my research better and bought one of those instead of the steel one from DA when I bought the HUB direct thread mount for my new LTi XC because that Ti one from Rearden is an ounce lighter and cost the same.

I've never used the Xeno mount setup my LTi XC came with because I put the direct thread cap on soon as I got it but I've been told they're slightly quieter with a direct thread cap versus the Xeno setup. Have you by chance shot either of yours with a direct thread then the DA Xeno setup and if so could you tell any difference?

Been shooting mine on my 20in 6CM and now 22in 25 SAUM and it is about the most impressive can I've ever owned. Not that either of those are much for recoil but with the can on it's not only super quiet but recoil is basically nonexistent.

 

[rileybassman]

My approval came through today... Filed Wednesday. Shop doesn't open till Tuesday but should be able to test it out in a week or two.

Sent from my SM-S916U using Tapatalk

 

[khuber84]

Wish I would have done my research better and bought one of those instead of the steel one from DA when I bought the HUB direct thread mount for my new LTi XC because that Ti one from Rearden is an ounce lighter and cost the same.

I've never used the Xeno mount setup my LTi XC came with because I put the direct thread cap on soon as I got it but I've been told they're slightly quieter with a direct thread cap versus the Xeno setup. Have you by chance shot either of yours with a direct thread then the DA Xeno setup and if so could you tell any difference?

Been shooting mine on my 20in 6CM and now 22in 25 SAUM and it is about the most impressive can I've ever owned. Not that either of those are much for recoil but with the can on it's not only super quiet but recoil is basically nonexistent.

Negative, my cans move around, and I prefer the simplicity of the A419 hellfire mounting system. The new DA Nomad XC series sets the standard for 3d cans in dB reduction, and tone. They're a great product!