7mm PRC Build with a 20" Barrel - Elk Rifle for 2024 - Advice?

[Jwright7468]

Tikka + 7prc + Rokstok or Stocky's VG. Especially since you are running factory ammo. Upgrade to a chassis if you can afford it.

I was planing on a mini chassis in either of those two stocks. Do you like the chassis better for weight or accuracy and stability? Is one that much better than the mini?

 

[gtriple]

I was planing on a mini chassis in either of those two stocks. Do you like the chassis better for weight or accuracy and stability? Is one that much better than the mini?

I've never used either of those stocks, but they are nearly as expensive as an XLR ELEMENT 4.0 MG or an MDT HNT26, both of which offer more customization.

 

[GAHunterJim]

I think the 6.8 Western will slowly die off but the PRC will continue to grow with factory ammo offerings.

 

[Grundy53]

I've never used either of those stocks, but they are nearly as expensive as an XLR ELEMENT 4.0 MG or an MDT HNT26, both of which offer more customization.

They are half the price of a HNT26.

Sent from my SM-S901U using Tapatalk

 

[gtriple]

They are half the price of a HNT26.

Sent from my SM-S901U using Tapatalk

The HNT26 (arca + folder) retails for $1600.

The Manner's MCS-LRH retails for $963 to nearly $1300 based the ready-to-ship versions.

 

[Grundy53]

The HNT26 (arca + folder) retails for $1600.

The Manner's MCS-LRH retails for $963 to nearly $1300 based the ready-to-ship versions.

But the stocks he mentioned were the Rokstok and the Stockys VG. I don't see where he mentioned a Manners?

Sent from my SM-S901U using Tapatalk

 

[gtriple]

But the stocks he mentioned were the Rokstok and the Stockys VG. I don't see where he mentioned a Manners?

Sent from my SM-S901U using Tapatalk

Ah, we crossed our lines. I was replying to Jwright, not the OP.

 

[mchrist]

I'd like to build (or buy) a 7mm PRC. Rifle is for the singular purpose of elk hunting in the backcountry and will be backpacked in frequently. I hunt western big country but never anticipate to shoot over 600 yards.

I have plenty of time so have no concerns about lead times of components and am even open to waiting for a new rifle to release is that’s the best option.

Parameters:
Barrel: I’m set on a 20" Proof Research Barrel to allow for a Thunderbeast Ultra 7" attached to it (I just purchased the suppressor for 2024 possession)
Action: Remington 700 clone to allow for future ease into an HNT26 chassis if desired
Recoil: free recoil energy <23.15lbs consistent of a 7mm rem mag non-suppressed, non-braked in classic wood stock.
Weight: As light as possible without increasing recoil threshold

With looking at many different rifles, I love the Proof Research Elevation MTR rifle. However... it comes standard with a 24" barrel only and there is no 20" barrel option. The best idea I've figured is to buy this rifle and do a barrel swap with gunsmith and sell the stock barrel. I’ve also wondered if could modify stock barrel. I'm torn on the idea of modifying a brand new rifle altogether.

View attachment 565631

Is there a better way to get to a build as described with similar component like this more effectively or affordably? Any other advice worth considering?

Would you keep the suppressor on it while hiking or take it on and off?

 

[chukwithak]

Eh, you are getting an average (at best) trigger and a mediocre action IMO.

Tikka action $700 (although I often find them for sub 600)
Proof barrel $950
HNT26 $1500
$3150

What is your realistic budget?

This is pretty much what I did.

I bought the Tikka 7mm mag super lite stainless to avoid corrosion.

Immediately swapped the barrel for a 22” proof w/SRS TiPro 4 Brake.

I was able to get a HNT26 on Black Friday.

Vortex LHT with Vortex rings and it weighs under 8lbs.

 

[Ryh314]

This is pretty much what I did.

I bought the Tikka 7mm mag super lite stainless to avoid corrosion.

Immediately swapped the barrel for a 22” proof w/SRS TiPro 4 Brake.

I was able to get a HNT26 on Black Friday.

Vortex LHT with Vortex rings and it weighs under 8lbs.

What was your cost on this build? Nice setup

 

[TJE0705]

Taking this to Montana next week

7prc
Impact nbk action
Xlr chassis
Tbac ultra 5 supressor
Leupold mk5 3-18

Weighs 10.3lbs as pictured with 5 in the mag

 

[Timberline001]

I'm just getting Unknown Munitions to load me up their best ELD-X 7PRC load. I was going to do this anyways because I like their consistency over factory ammo.

Were you able to get them to load for you? I’ve been waiting for over a year for them to add 7 PRC to their website and they havnt. In fact they havnt updated any of the loads I follow either.

 

[AU.MASHnKS]

Were you able to get them to load for you? I’ve been waiting for over a year for them to add 7 PRC to their website and they havnt. In fact they havnt updated any of the loads I follow either.

Call them


Sent from my iPhone using Tapatalk

 

[AU.MASHnKS]

View attachment 779112View attachment 779113Taking this to Montana next week

7prc
Impact nbk action
Xlr chassis
Tbac ultra 5 supressor
Leupold mk5 3-18

Weighs 10.3lbs as pictured with 5 in the mag

What height ring did you go with? I have a similar setup.


Sent from my iPhone using Tapatalk

 

[gtriple]

Were you able to get them to load for you? I’ve been waiting for over a year for them to add 7 PRC to their website and they havnt. In fact they havnt updated any of the loads I follow either.

You just gotta email them

 

[Willie IV]

You just gotta email them

Yep, I've ordered several boxes of 7PRC ammo from them.

 

[Timberline001]

Yep, I've ordered several boxes of 7PRC ammo from them.

Why aren’t they putting it on the website? I check daily hoping they’ll drop 7 PRC along with the 3 other rifles I’ve only fed their ammo and it’s never updated.

 

[Willie IV]

Why aren’t they putting it on the website? I check daily hoping they’ll drop 7 PRC along with the 3 other rifles I’ve only fed their ammo and it’s never updated.

I simply think they are so busy that advertising the 7PRC option isn't a priority. It sucks cuz I was in your same shoes. I waited a couple months and just ended up calling them.