6mm arc build Howa Mini or buy complete

[General RE LEE]

For threaded lugs I like to use all thread to start, spread release agent generously on the threads and then pre-thread it into the lug, I then use it as a guide to line up the hole on the stock, once you get the stock pressed on remove the all thread and clean up the hole with q-tips before inserting the action screw that has been lubed and then torque.

I guess the problem is I don’t know what “all thread” is.

 

[The Guide]

I guess the problem is I don’t know what “all thread” is.

A piece of round stock that is all threaded. Like a bolt with no head and only threads.

Jay

 

[General RE LEE]

A piece of round stock that is all threaded. Like a bolt with no head and only threads.

Jay

Anyone know the thread pattern for front action screw?

 

[mahonsr]

Yah it was kind of weird to bed with the screw going up through the lug - I’m no expert but was just careful with how much and where I put the epoxy. So it wasn’t running into the screw hole before I got the bolt in there. Bedding doesn’t really need that much - I was trying for more of a skim bed. did the recoil lug and rear of the action. I didn’t have a problem.

 

[KY_coop]

Shot 25 more rounds today a 20 shot group and 5 after making adjustments. Not bad results but not great either. Would bedding the action help tighten these up? The 20 shot group could probably be tighter if I took my time a little more.

 

[Lentuk]

Anyone know the thread pattern for front action screw?

M6-1.0 all thread

Amazon.com

 

[passinggas33]

Need some help… Brownells is telling me the 22” standard barrel 4.8 pounds and the 20” barrel is 4.3 pounds. I read the post that says the 22” is about 3.85 pounds. Please somebody tell me that somebody has weighed one of the 22” and could tell me the weight!!