your good (or not so good) customer service interactions of late

Joined
Dec 20, 2019
Messages
1,137
I had a CS experience of sorts with Trijicon. I used the form online email contact and got an immediate response.

  • Message / Info: I bought a Credo 3-9x40 for one of my ARs. I liked it so well that I ordered another for my Christensen Arms Mesa. With the scope mounted in the correct position, the bolt knob strikes the throw lever when the scope is set at 9X. The Mesa has a straight bolt handle. I moved the scope to another rifle to check it out. It barely clears. I can get a very little bit more clearance by going with high rings, but as with most shooters, I like my scopes as close to the bore line as possible. Even when I am able to get a little clearance, it is still so close to the bolt, that if I work the bolt in a hurry, it's a knuckle buster.

    I started to grind the lever off, but then thought that it might void the warranty. I read around on the internet a bit and see that this is a common concern with this otherwise PERFECT scope. Have you identified any kind of work arounds?
Thanks,
Fartrell



Good afternoon Fartrell,



Thank you for your patronage of Trijicon products. If the magnification throw lever of your Credo 3-9x40 is still interfering with your bolt handle you may need to use slightly taller rings to have enough clearance. Modifying your throw lever will not void the warranty, however Trijicon does not recommend grinding on the surface of our optics. Any issue with the scope that is found to be a result of the modification would not be covered by warranty, also the metal will no longer be protected from the elements and may begin to corrode.

Please let me know if you have any more questions.


Sincerely,

Jeremy

Trijicon Technical Customer Service Specialist



Hi Jeremy:

I appreciate the quick reply. It sounds like there isn't a good workaround. Even when I mounted it in higher rings the clearance was so tight that it remained a knuckle buster. Then I was left with a nice trim rifle and a nice trim, small objective scope mounted WAY above the bore, and no self-respecting hunter wants that kind of unsightliness, right? I am going to get a Dremel after it.

Here's what really matters to Trijicon. I'd put one of these scopes on nearly every one of my lightweight bolt guns if Trijicon would simply re-engineer the location of the lever about 1/2 inch further left, OR as you have on some of your other scopes, make it a screw in lever with multiple threaded locations.

Just some thoughts brother. You and yours have a Merry Christmas!



Fartrell,

Thank you for the feedback. I will make sure to send it over to our engineers. You have a Merry Christmas as well and please let me know if there is anything more I can assist with.


Sincerely,

Jeremy
Trijicon Technical Customer Service Specialist
 

JStol5

WKR
Joined
Apr 9, 2022
Messages
556
Great experiences recently with:

GoHUNT: Cody the optics specialist is excellent. Answered a ton of questions and mentioned being willing to work with me on price should I decide to pick up something from them. GoHUNT in general has always been excellent- I've picked up boots, packs, and clothing from them and they have always been incredibly helpful.

Shrewd: I had a quick disconnect freeze to a stabilizer. I sent it to them and they fixed it for me, no problem. High quality equipment and great CS.

AAE/Arizona Archery Enterprises: Always has been excellent. One of my favorite companies to patronize. Well made products and they take care of their customers. I had some issues with a stabilizer I ordered and they took GREAT care of me.

Kifaru: Called with some questions about some sale items and the gal doing Customer Service was the only one working that day. Despite that, she was extremely patient and helpful and made my experience a lot better.
 

tony

WKR
Joined
Nov 13, 2015
Messages
1,047
Location
WV
Kings Loot
One of those copy cat thin wallet hipster outfits
GF bought me one for Christmas, looked at the package and told her to send it back as it wasn't my style.
Have to email for all returns. A week and no response, Facebook page looks like returns are a shit show from what I've read, they want a picture of the wallet unopened.
Canned responses from the outfit with excuses on the face book page.
Might have her look into a charge back with this outfit.
AVOID!
 
Last edited:

JREG19

Lil-Rokslider
Joined
Oct 24, 2021
Messages
174
Location
Caldwell, ID
I've been pretty disappointed with Sig Sauer Electro Optics CS.
I had a pair of zulu 9 15x56 that I couldn't get to focus properly so I sent them an email. They told me to send them in. I sent them in at the end of June and didn't hear anything until I reached out to them at the end of July. I got a quick response that they were out of stock with my model and asked if I wanted range finding binos instead. I'm not really interested in any of their optics besides the model I already had. I asked what my options were and they told me I could borrow a pair of lesser binos so I could have something to hunt with and they would send me the new ones when they became available.

I decided to sign up for inventory notifications because they had already dropped the ball. I got an email saying they were in stock. I decided to wait a little bit to see if they would contact me.... they haven't so I reached out to them a few weeks ago and haven't received a response yet. I sent a follow up email today.

I understand it's the holiday season and people take vacation but pretty disappointed so far. We will see if this follow up email does anything.
 
Joined
Dec 20, 2020
Messages
66
CZ USA

Had a problem with a shotgun firing pin. They sent me an email with a shipping label … had my fixed gun back very quickly and they went through the entire gun.
 
Joined
Dec 5, 2019
Messages
1,146
Nosler- Absolutely terrible in all aspects. Sent them a rifle back since it had chambering/rifling issues. They sent it back and the bolt wouldn’t even close and the stock was all chipped up like someone had used a chisel to get the action in. Sent it back in and can’t get any updates or timelines. I have to fight just to get a response. I should have just sent it off to a smith to get repaired and paid for it myself.
 
Joined
Dec 5, 2019
Messages
1,146
Nosler- Absolutely terrible in all aspects. Sent them a rifle back since it had chambering/rifling issues. They sent it back and the bolt wouldn’t even close and the stock was all chipped up like someone had used a chisel to get the action in. Sent it back in and can’t get any updates or timelines. I have to fight just to get a response. I should have just sent it off to a smith to get repaired and paid for it myself.
This also all started in July and I was originally told 4-6 weeks.
 

DuckDogDr

WKR
Joined
Aug 24, 2019
Messages
711
Definitely positive experience with GoDevil this past fall. Lost a part on my motor pulling my boat for a DIY hunt ( 10 day trip)
Go Devil overnighted at regular shipping rates to get me going the next day.
 

Q child

WKR
Joined
Nov 8, 2018
Messages
533
Oh man. I had a terrible experience with Alaska Airlines recently.

I was about to take a trip that had two flights each way with a layover in between. My layover going away from home was like 10 or 12 hours, and my destination city was only a couple hours from there by car. I tried to cancel my second flight so that I could drive instead. Alaska Airlines wanted to charge me $170. To be clear, I would be taking one flight instead of two and they wanted to charge me money. I said "no way."

So I told them, "fine, then I just won't show up." They told me that if I didn't show up, then they would cancel my return flights. I was livid and spent a terrible night in the airport.

Super predatory policies in my opinion.
 
Joined
Feb 24, 2016
Messages
2,629
Called leatherman today after I broke mine this weekend. Honestly, that was the most pleasant experience I have had with customer service in a damn long time.
 
Joined
Jan 22, 2016
Messages
1,261
Location
Missoula, MT
Bought in October but I invested in a Swarovski BTX and the 115mm objective. Took it on its second outing and the forehead rest fell off somewhere. Have no idea where it went. Called swaro and they sent a replacement immediately no questions asked.


Sent from my iPhone using Tapatalk
 

30338

WKR
Joined
Jun 2, 2013
Messages
1,994
Walked into Cabelas Lone Tree at 9:15 am on a -15 degree morning. I was about the only person in the store lol. Was interested in shouldering some 20 gauge and 28 gauge semi autos to see if I may be interested in one. I'll pay a premium to stocking dealers locally vs internet shopping if they provide good service. There were 4 guys in sales standing behind the gun counters either talking amongst themselves or fiddling with guns that were in the racks.

I cruised down the counter twice in a 10 minute span and never was asked if I needed help. Walked into the gun library and they had a 28 gauge black eagle. It felt nice but more inclined to look at a Benelli Ultra Light or possibly a Citori. Anyway, will try Sportsmans in Parker next.
 

truehaun

FNG
Joined
Nov 15, 2020
Messages
88
Ordered some new 10x42 Swarovski ELs from Cabelas. When I got them turns out they were a display model also they were just thrown in the box with no packing material to protect them. Emailed Cabelas and 15 minutes later got a response they gave me 10% back. Bad customer service by getting sent a display model when advertised as a new model, but good after sale service to correct the problem. Overall after my 10% promo gift cards and 10% club discount I got these els for $1678.15.
 

Attachments

  • 6680A2D4-BC42-4C1A-9823-253853377004.jpeg
    6680A2D4-BC42-4C1A-9823-253853377004.jpeg
    150.3 KB · Views: 26
  • 54945AAD-739F-42D6-B7F4-240FF3D88D03.jpeg
    54945AAD-739F-42D6-B7F4-240FF3D88D03.jpeg
    174.3 KB · Views: 26

tony

WKR
Joined
Nov 13, 2015
Messages
1,047
Location
WV
Hanes brands
GF ordered me few packs of white t shirts for Christmas, wrong size. Called about returning as I’m close to the deadline.
Lady I spoke to not only extended the return date. She waived the $7.00 return label fee and sent me a free return shipping label (y)
 
Joined
Jan 8, 2022
Messages
1,386
Location
Western Montana
Swarovski- Excellent. Literally completely rebuilt some older SLCs

Leatherman- Excellent. Replaced without question

Kuiu- Pretty darn good. Credit for the purchase price of a few pairs of gaiters and replaced a hip belt suspension without question

Crispi- Absolute shit. Boots completely destroyed after 1 week of hunting and they took zero accountability. Buy Scarpa with 3mm thick leather, period.
 

JStol5

WKR
Joined
Apr 9, 2022
Messages
556
Swarovski- Excellent. Literally completely rebuilt some older SLCs

Leatherman- Excellent. Replaced without question

Kuiu- Pretty darn good. Credit for the purchase price of a few pairs of gaiters and replaced a hip belt suspension without question

Crispi- Absolute shit. Boots completely destroyed after 1 week of hunting and they took zero accountability. Buy Scarpa with 3mm thick leather, period.
Was thinking of buying Crispis and this makes me question it…
 

Dinosdeuce

FNG
Classified Approved
Joined
Jun 24, 2022
Messages
29
Location
Northern Mississippi
Apex 3d designs

Outstanding customer service!
i ordered an Anker 10k battery pack mount for a night vision setup. Very fast shipping even during the Christmas holiday . Upon opening the package and taking out the part it was cracked on one of the stringers. I was concerned about how the mount would hold up taking the battery in and out. I replied to their shipping notification email provided a picture and stated my concern and to please advise me on what I should do. It was clearly damaged in shipping. Received an email in less than 10 minutes apologizing an stated they would get another sent out. Email was sent at 2037 and reply was at 2046 Not used to that great of service anymore.

Just wanted to give a shout out to Apex 3d
 
Top