Ohiohuntr
Lil-Rokslider
- Joined
- Aug 25, 2021
- Messages
- 210
Yes
I'm not an optics manufacturer, but my assumption is that the secret sauce for Trijicon/Nightforce is in the specifications. A production agency won't design your scope for you; the design agency delivers a set of specifications with tolerances.
I think the ruggedness of a scope is driven by a mixture of certain design features and the right specifications. NF and Trijicon have figured this out, but I think the Maven RS1.2 accidentally hit the right balance.
Maybe I'm wrong, but I don't think you can just call up LOW and say "Give me a rugged scope." Especially if it's significantly different than what's already on the market. Who knows how many iterations it would take to prototype and tweak specs, with each unit taking 6+ months to produce.
Ryan—Can you share anything about how the company you are talking with viewed the responses to your thread here? Were they surprised, responsive, or dismissive?Scope specs:
FFP 3-12x40 to 3-12x44mm
Consistently holds zero through 3-foot drops and 3,000 rounds of constant use.
The reticle is specially designed for 25 to 600 yards, with bold outer posts and correct center aiming references.
Zero Stop
Low profile top turret.
Capped windage.
Large eye box
Good glass
20oz
Sent from my iPhone using Tapatalk Pro
yesScope specs:
FFP 3-12x40 to 3-12x44mm
Consistently holds zero through 3-foot drops and 3,000 rounds of constant use.
The reticle is specially designed for 25 to 600 yards, with bold outer posts and correct center aiming references.
Zero Stop
Low profile top turret.
Capped windage.
Large eye box
Good glass
20oz
Sent from my iPhone using Tapatalk Pro
Yes, I need another scope soon, assuming this isn’t a random question, I might wait and see how this unfoldsAll:
It’s a serious question from Ryan. This is not just a feeler post. No presale or other nonsense.
If a 3-12x40’ish mil/mil scope was offered that was consistently reliable and durable, was tested heavily, had multiple reticles that were truly usable/visible from 3-12x, a good/great eyebox and DOF, low profile zero stop elevation and capped windage; and was under $1,500- would you buy it?
Too high of a power reduces field of view and increases the likelihood you loose sight picture on the shot. If you didn't see what happened with the shot you've lost valuable information and also loose time reacquiring the animal in the scope. Apples to apples, more animals are likely lost or rodeo's created IF that first shot doesn't do the job and a follow up shot is needed while folks struggle (and probably zoom out) to find the animal again. Also when folks loose the animal while setting up for the shot, have to zoom out and find it and then zoom back in for "aim small" they waste time and potentially loose opportunities.Also, can someone point me to the thread where everyone decided low power was better than high power? Not being sarcastic, legit interested because I've always been on the side of "aim small, miss small"
On this note...I shoot just as accurate at 100 to 600 with my x10 and my x15...it just doesn't seem as accurate from the rifle...but out on the target it is. It takes some of the wiggle out and I think there is a bit more confidence in the shot.Too high of a power reduces field of view and increases the likelihood you loose sight picture on the shot. If you didn't see what happened with the shot you've lost valuable information and also loose time reacquiring the animal in the scope. Apples to apples, more animals are likely lost or rodeo's created IF that first shot doesn't do the job and a follow up shot is needed while folks struggle (and probably zoom out) to find the animal again. Also when folks loose the animal while setting up for the shot, have to zoom out and find it and then zoom back in for "aim small" they waste time and potentially loose opportunities.
Aiming to within a 1/4" or whatever is relevant for punching paper, its not relevant for hunting big game where aiming within 1" or whatever is completely suitable for practicality.
Exactly. Durable high mag scopes with appropriate reticles for high mag already exist, and are made by NF. OP scope would sell like hotcakes, and Ryan knows it.There are already a bunch of high magnification options too. Most of what nightforce makes. It adds a bunch of cost and weight though. There’s very limited options for reliable, fairly lightweight, no frills, affordable hunting scopes.
Sounds like the perfect hunting scope to me. Good Japanese glass, and assembled in the USA would be ideal.All:
It’s a serious question from Ryan. This is not just a feeler post. No presale or other nonsense.
If a 3-12x40’ish mil/mil scope was offered that was consistently reliable and durable, was tested heavily, had multiple reticles that were truly usable/visible from 3-12x, a good/great eyebox and DOF, low profile zero stop elevation and capped windage; and was under $1,500- would you buy it?
I would argue this is definitely the ideal scope for the hunter wanting to maximize performance.In all seriousness, why would you not buy a scope that fit those parameters for 99.9% of true world hunting scenarios (insta-hunter 1,000 yard animal shots excluded)?
Pending you can get them to me up in Canada I would likely be buying 2, if we can keep them around $2K CAN.
Why not shoot w both eyes open for those close range, quick shots. Dominant eye will show +, other eye shows everything else. At least that’s how i was taught.Has absolutely nothing to do with focusing on a target 100 yards away. It’s about field of view up close. The VX6 2-12 is one of the best scopes I’ve found for this with a huge FOV, but reading this forum convinced me they can’t be trusted, so I switched my hunting rifles to Credo 2.5-15’s. Those are great scopes, but it is noticeably tighter up close. Of course FOV isn’t dependent on magnification alone. I’m wondering about real world reliability issues on the VX6HD on a 300 and under gun for that reason.
Sent from my iPhone using Tapatalk