whats your hunting arrow for 2014. shaft, fletch, nock, braodhead

desertcj

WKR
Joined
Jul 21, 2013
Messages
647
Location
Central CA
Same as last year, 28" Easton Bloodline 400's, Blazer vanes, H-nock and Slick Trick Mag 125 grain. 402 grains total weight. May try some Dirt Nap broadheads though...
 
Joined
Jan 31, 2014
Messages
2
Blood sport ht1 300s in the 001 straightness variety with the new outserts and 100gr helix broad heads up front, fletched with three 3in zeon fusions. Extremely quiet, accurate, hard hitting and absolutely devastating combo. I harvested four axis deer ( over here in Australia we call them chital) and three very good quality hogs in one 7 day hunting trip with this combo. I won't be changing my set up in a while
 

Danielboone

Lil-Rokslider
Joined
Jan 6, 2013
Messages
113
One bow will shoot a 250 spine BE Rampage tipped with a Firenock stainless steel Aeroinsert and Exodus 125 grain. Nock will be Firenock A nock and Flex Fletch Flash vanes.
The other, a BE Carnivore with Firenock insert and the new Firenock BH. Firenock S nock and FF Flash vanes.
 
Joined
Feb 24, 2012
Messages
4,897
Location
Colorado
Gold tip kinetic 300 with (75 grain) brass Hit inserts with shuttle t lock/terminal t lock head. Wrap with 4 flex fletch flash vanes. And a g nock
Weighs 470
 
Joined
Feb 24, 2012
Messages
4,897
Location
Colorado
For you guys shooting Kinetics... Have you had the pleasure of bending an outsert yet? I loved those arrows but it doesn't take much to render them useless. Their outsert design is horrible.

Hey nick,
I didn't like those outserts so I don't use them. I use HIT inserts instead. Brass ones to boot. Increased FOC and more weight!
 
Joined
Mar 6, 2013
Messages
3,265
Carbon Express Maxima Hunter 350 with type 1 insert and a gold tip 20 gr screw in weight with a 4 inch onestringer wrap and 3-Flex fletch SK 200 vanes. Broadheads are either 100 grain shuttle T/Terminal T or Ulmer edge broadheads.

Forgot to add that I use QAD Tune- A -Nocks and my arrows weight exactly 400 grains
 

CentennialELK

Lil-Rokslider
Joined
Dec 28, 2013
Messages
115
Location
S.E. Idaho
Easton Axis 400, Blazer vanes, and 100gr Steel Force Phatheads currently. Switching to FMJ Injexions and 125gr Solid s30v's for this season.
 

ChadS

Lil-Rokslider
Joined
Jan 1, 2014
Messages
272
Location
Elizabeth, Colorado
Gold tip kinetic 300 with (75 grain) brass Hit inserts with shuttle t lock/terminal t lock head. Wrap with 4 flex fletch flash vanes. And a g nock
Weighs 470

Pretty much shot this exact same arrow all last season. Hits real hard. I was at 490 total weight with a 50grn brass insert @ 288fps. BUT as I mentioned in a thread earlier that HIT insert will crack the front of your arrow if you hit anything fairly hard. Its a lot of stress on the insert/shaft when that kind of energy connects.
 

joehunter8301

Lil-Rokslider
Joined
Mar 9, 2012
Messages
146
Hey nick,
I didn't like those outserts so I don't use them. I use HIT inserts instead. Brass ones to boot. Increased FOC and more weight!

You ever tried the broadhead adapter ring (BAR) Easton makes? Seems they would keep arrows ends from splintering and until they come up with a better design than either hit insert or gold tips long outsert I'm gonna stay with my gt xt hunters.
 

Dion

FNG
Joined
Jun 24, 2012
Messages
13
Gold Tip Pro Hunter 7595 w/10grns on insert and w/Easton G pin nocks, Flex Fletch Flash, and Rage Extreme/Muzzy Trocar. I always have a mech and fixed in the quiver depending on the situation.
 

5MilesBack

"DADDY"
Joined
Feb 27, 2012
Messages
16,142
Location
Colorado Springs
For you guys shooting Kinetics... Have you had the pleasure of bending an outsert yet? I loved those arrows but it doesn't take much to render them useless. Their outsert design is horrible.

When the Trophy Ridge arrows came out I tried them with their outserts, but found that they bend real easily. Then I tried the Kinetics and their outsert as well, same thing. So all I use is HIT's now when building these types of arrows. Never had a problem with the HIT's.
 

Danielboone

Lil-Rokslider
Joined
Jan 6, 2013
Messages
113
Yes, the GT outserts are junk. I prefer either the HITs or the Firenock Aeroinsert in stainless steel.
 
Joined
Mar 14, 2012
Messages
301
Location
Kinnear, WY
Gold Tip Expedition hunter 7595. GT standard nock. Quickfletch with 2" quickspins. Rocky Mtn snyper 3 blade or epek hunting XC-3 depending on what I am hunting. extra 5gr washer on tip.
 

quarbles

FNG
Joined
Feb 24, 2012
Messages
86
Location
the mighty yukon territory.
easton axis 300 @ 29.6 carbon to carbon. xnock, no wrap, 4 fletch sk200's on one end... 2x 16g hit insert, 125g broadhead. think i want to try vpa non vented this year. 500g total.
 

jmez

WKR
Joined
Jun 12, 2012
Messages
7,547
Location
Piedmont, SD
Not sure yet. Experimenting right now.

Last year was 340 FMJ 28 inches and 125 gr Razor trick, 3 blazer vanes. Finished weight 485gr. FOC 11.6

Just built a few FMJ injections 330, cut to 27 inches using VAP Penetrator insert, half out. Those weigh 479gr with an FOC of 13.4. So far not impressed with these.

Going to also build a couple with the second generation VAP half in half out. These will weigh 496gr with an FOC of 14.8.
 

supercub

FNG
Joined
Jan 14, 2013
Messages
33
Location
ND
Victory VAP 300
Deep-Six insert (20 gr) + 20gr
2.1" Fusion Vanes & wraps
125gr RamCat
450gr
15.25% FOC
 
Joined
Mar 22, 2013
Messages
30
Location
Montana
Easton Carbon Injexion 330s, deep six insert, 3 Blazer X2s, 100 grain rage hypodermic 436 grains total
 
Top