What's your arrow setup? 2019/2020

[rekkr870]

I've killed two deer with them. I tend to shoot forward so this setup is much more forgiving.
I hit the shoulder on one deer quartering to and it blew through both sides. The other deer was a double lung that hit rib on both sides. Butter.

My VXR is already spooky quiet and the harpoons that it shoots make it that much quieter.

I've got another project going with a 240 spine Bloodline, 175gr insert and 200gr Grizzlystik Alaskan, 3 2" feathers with a right helical. Should be around 670gr with 28% FOC

Sent from my SM-N960U using Tapatalk

 

[marktole]

Seeing a few guys run the BEA Rampgae. Has anyone tried the FOCOS outsert system with these arrows? Noticed other fellas mentioning various inserts and weights to hit the 490-510 range with that arrow.

Currently running BEA Rampages 300 spine with stock components, 455 TAW. Thinking of having a new dozen built with the FOCOS (depending on some feedback) and finishing up at ~505 grains.

Also considering the Victory VAP TKO elite, finished around 500 grains with the 75 grain insert/outsert. Not entirely sure they’re worth the extra money though.

 

[DAJtheHunter]

Easton aftermath
300 spine 30”
Standard aluminum insert
Four fletch aae 23
150 grain cutthroat
Two small strips of reflective tape on each side of fletching
Total arrow weight about 520 grain

Some arrows have 75 grains of brass and 100 grain grim reaper 1 3/8.

Both arrows have killed a bunch of deer and coyotes this year.


60# RX1 ultra 31” draw

 

[3pointer]

Easton axis match grade
300 spine
50 grain insert
3 blazer veins
4 inch wrap
125 gr slick trick viper trick
495 grain total weight

290 fps out of a #72 nitrum turbo

 

[MoySan]

Easton Hexx
400 Spine
50 Grain Insert
4 AAE Recon Vane
125g tip
418g total weight

275FPS out of #60 VXR

 

[MaxHenderson]

Easton Hexx
400 Spine
50 Grain Insert
4 AAE Recon Vane
125g tip
418g total weight

275FPS out of #60 VXR

What’s your draw length?


Sent from my iPhone using Tapatalk

 

[MoySan]

What’s your draw length?


Sent from my iPhone using Tapatalk

27.5 DL and 26.5 arrow length.

 

[MaxHenderson]

27.5 DL and 26.5 arrow length.

I’m in the same rough area, I’ll have to give a similar setup a shot


Sent from my iPhone using Tapatalk

 

[MoySan]

I’m in the same rough area, I’ll have to give a similar setup a shot


Sent from my iPhone using Tapatalk

I used Archery Advantage Online to help me with this build, only have two range session with this build. Shot out to 60 yards this morning with pretty good groups.

 

[Usi05]

I used Archery Advantage Online to help me with this build, only have two range session with this build. Shot out to 60 yards this morning with pretty good groups.

I’m at same draw length. It sucks because I would like to go heavier but want to stay between 260-280FPS.

Aftermaths I just built should be about 275FPS and 435 grains @ 70#’s. I will bring poundage down in mid November due to cold and still be above 260.


Sent from my iPhone using Tapatalk

 

[Dead Coyote Jr]

Following . . .

 

[ShreckIII]

30" GT Kinetic Kaos 300 w/125gr. vented IW.

How do you like that setup and how do they do past 50yds? Not trying to shoot that far but as a just in case.

 

[Scottstepp1124]

Black eagle spartan 200's 30 1/4in nock valley to. end of outsert
26grain nock bushing
80 grain halfout
Standard nock
125 grain magnus hornet 4 blade
4 inch wrap
4-3inch feathers
Around 625 grains total 287 fps

Coming out of a
Hoyt axius ultra #3 cam
32 inch draw
77 pound draw weight

 

[ncavi8tor]

Easton Hexx 330 with 75 grain brass insert. 5" Onestringer wrap with 3 x AAE Max Stealth vanes. Unibushing with X nocks.
TAW = 445 grains.

NC

Sent from my SM-G970U using Tapatalk

 

[Beendare]

Recurve; ILF recurve, Dryad 19" riser and Uukha Vx longs, 64", right at 50#; Axis [soon to be Beman centershot] 340s, 31", heavy inserts, Magnus Buzzcut or Kustom Kings Jager 2 blade 150gr, TAW 585gr

Compound;
Hoyt Spyder circa 2013, 68#, Axis 300's cut 28 1/4" heavy insert and VPA 3 blade 150's, TAW 504gr

______

 

[2Stamp]

I just got done building the arrows for my PSE Mach 1. 71#, 27.5" draw.

BE Rampage 300, 27.75" total length.
Easton 75gr HIT, IW 25gr collar
125gr point
4" bohning wrap
4 fletch (trying some AAE 2.3 Max Hybrid and an AAE for now).

497-502 TAW as they sit right now.

 

[bluerivertrapper]

Easton 2315, 3 4" feathers and 125 grain Muzzy or Thunderhead, ~500 grains

 

[rekkr870]

Black eagle spartan 200's 30 1/4in nock valley to. end of outsert
26grain nock bushing
80 grain halfout
Standard nock
125 grain magnus hornet 4 blade
4 inch wrap
4-3inch feathers
Around 625 grains total 287 fps

Coming out of a
Hoyt axius ultra #3 cam
32 inch draw
77 pound draw weight

That right there is a MONSTER!

Sent from my SM-N960U using Tapatalk

 

[Dustin the wind]

GT Hunter XT 400 with just basic muzzys

 

[805Bowhunter]

300 Axis w/ 50gr of brass
AAE Max Stealth (three fletch)
4" wrap
Beiter Hunter Nock
Rage Trypan (100gr)

Finished arrow weight is 510