What did you do in the reloading room today?

[HuntHarder]

No reloading taking place in my reloading room for the next bit. My reloading room is a multipurpose room. Getting ready to do bratwurst in various flavors, snack sticks in various flavors and other sausage.

Thats a lot of work. My processing days are usually long and terrible.

 

[49ereric]

Another 100 357 mag Norma cases sized primed and flared…

 

[Steve300xcw]

Tossed about 250 75gr amax's into some range brass.

Been using a rcbs priming tool for near 20 years and it has sucked since day 1. Bought the frankford arsenal one. Cant believe it I put up with the rcbs for so long. Total game changer


I miss those days..

 

[RME]

Been using a rcbs priming tool for near 20 years and it has sucked since day 1. Bought the frankford arsenal one. Cant believe it I put up with the rcbs for so long. Total game change

Going to look into that one. I've also had an RCBS priming tool for probably 15 years and it's time for something better.

 

[coyotekilla]

Oh, im playing with a new 25-06. Formed some brass off 30-06 cause I heard you could. Stuffing them with 57gr of imr 4350. The load groups about .6" when I do my part. I tried the load in some new 25-06 hornady brass i bought, the hornady brass is 125fps slow, and an inch lower than the fed / rem mix. Also the weatherby / howa has a 6" vertical shift with & without the dead air primal.

Also messed with a cortina v3 tuner on my 223 heavy varmit, it shifted groups around but didn't noticeably improve them. That being said it's a new barrel & i don't have a ton of data on the rig. Initial results were not dramatic.

 

[Steve300xcw]

Going to look into that one. I've also had an RCBS priming tool for probably 15 years and it's time for something better.

Mine sucked with large primers but bust out the small primers. And it was double feeds, flipped primers, jams, you name it. I hope whoever packaged that POS steps on a lego every night.

Really nice having a primer tray bigger than a thing of primers. It does use its own style of shell holder, so dont go thinkin you're going to get a deal on a complete set of shell holders

 

[Steve300xcw]

Also found this interesting

 

[ResearchinStuff]

Looks like I'm gonna be about 1000 grains of benchmark short of loading up all my tmks. Kind of annoying to make 1350 of one recipe and 50 of another, so I'm mulling that situation over while my hands recover from chamfer and deburr work. Cranked out another hundred 20 gauge too, probably have 500 more to get through this bucket of hulls.

 

[MD97756]

Loaded up some 6cm. 108m’s 39 gr- 41.5gr and mkx 107’s 39g-41.2gr. Seated at 2.80” coal, see what happens when the weather gets better.

 

[RME]

Mine sucked with large primers but bust out the small primers. And it was double feeds, flipped primers, jams, you name it. I hope whoever packaged that POS steps on a lego every night.

Really nice having a primer tray bigger than a thing of primers. It does use its own style of shell holder, so dont go thinkin you're going to get a deal on a complete set of shell holders

Yep that’s all the same problems I’ve had with mine. I’ve learned how to work around them mostly but that doesn’t make it a good experience. Tryimg to dump a full pack of primers into the too-small round tray is the one that really gets me

 

[snuzzo29]

Primed some 10mm and hoping to load it up after dinner. Changing bullets from berrys to hornady HAPs, so I am hoping for better accuracy at full power.

 

[Steve300xcw]

Yep that’s all the same problems I’ve had with mine. I’ve learned how to work around them mostly but that doesn’t make it a good experience. Tryimg to dump a full pack of primers into the too-small round tray is the one that really gets me

You'll be amazed how fast it goes when you have a priming tool that doesnt suck

 

[338edge]

Building a new load for my LRKM in the 338 Terminator

Tossed about 250 75gr amax's into some range brass.

Been using a rcbs priming tool for near 20 years and it has sucked since day 1. Bought the frankford arsenal one. Cant believe it I put up with the rcbs for so long. Total game changer


I miss those days..

View attachment 1021367

I use their hand priming tool for over 20 years and love it. Which one are you talking of

 

[Steve300xcw]

I use their hand priming tool for over 20 years and love it. Which one are you talking of

 

[ResearchinStuff]

The rcbs universal hand primer with the square tray works just fine. No case holder needed

 

[338edge]

The rcbs universal hand primer with the square tray works just fine. No case holder needed

Right on

 

[Caseknife]

Resized about 150 240WBY cases, in the tumbler with Nishiki rice right now. Will trim and chamfer tomorrow. Tempted to get this primer tool. https://www.amazon.com/DERRACO-ENGI...932128e65fe778a3d7a69f2&qid=1771123913&sr=8-3

 

[AndrewMT34]

Loaded my prepped 223 brass with 77 tmks and XBR 8208.

 

[MtnSquach]

Loaded a ladder for pressure testing for my 6.5 PRC. 143 eldx’s and H1000. Started seeing slight pressure at 59.0gr. I tried the H1000 because that’s what I already had. Going to try H4831 and N565 next. I think I can squeeze a little more velocity out of it.

 

[49ereric]

Charged a 100 357 mag with 300MP seated 158 grain NE target & reloading JSP Lee factory crimp die. Lots more to do.