What did you do in the reloading room today?

[Xstang77]

Got brave and stripped down my green machine for a deep clean which it's probably never had done in its 40 plus years of existence.

 

[Bluefish]

Made 25-35 AI brass from 375 win.

 

[amassi]

Loaded 200 223/77tmk/ xbr loads
Loaded 20 rounds of 22 creedmoor 62gr eld vt just for funsies
Prepped and primed 100 pieces of 6cm brass
Loaded 50 6UM/N570/115 Dtacs


Sent from my iPhone using Tapatalk

 

[wapitibob]

I last check my throat at 82 shots, so I checked the other day at 432; looks like I burned away .100" in the last 350 rounds. I figured it was time to move the bullet out and start over. I'm now at 4.045" OAL to the lands in a 7 STW and 195's, which gets the boat tail jct above the neck/shoulder. I backed off the lands by .020" and loaded one each from 77 to 83gr of N570 and shot at 100. Impacts went from right to left and I think I'll load up 3 ea from 80-82 and see if it repeats. I didn't see any pressure or have a heavy bolt.

 

[Ringbill27]

Loaded up 20 rounds of 7.62x39 with 123gr TSX and CFEBLK. Deer season starts Saturday.

 

[wind gypsy]

I last check my throat at 82 shots, so I checked the other day at 432; looks like I burned away .100" in the last 350 rounds.

 

[wapitibob]

3 each at 100. I’ll go to 600 with 81.5, 81.7, and 82.

 

[49ereric]

Loaded thirty 06 cases last night cuz bought a rail for the 110 Savage and changing the scope so needed ammo to sight in. Used 50 grains of W748 cuz I have a lot and saving the IMR 4350 for hunting ammo. I used federal 150 grain pull down bullets.

 

[jfk69]

Neck sized and fully prepped 50 .280 Rem cases on Norma once fired brass and then neck sized and fully prepped 60 rounds of 7 Rem mag on Norma once fired brass.

 

[sierracharlie338]

Just got back from the range and shot some of my previous loads. Will be back in the loading room after hunting next weekend.

 

[cmwhitmoyer]

Loaded an extra 20 for my daughter's 270 win with 130 gr Hornady CX burning 56.3 gr of Ramshot Hunter. Rifle deer starts Saturday.

Sent from my SM-G970U using Tapatalk

 

[jcaud]

Hadn’t done much reloading lately, but last night I whipped up a small batch with the last bit of some 87 gr VMAX I’ve had laying around for my .243.

 

[hunting1]

32 rounds of 300WSM with H4831SC and Hornady 190gr CX.

 

[Sinistram]

I covered my previously painted reloading bench top with a fresh sheet of Formica. Visibility is much better and it's easier to clean. Only cost about $100 and an afternoon's worth of time.

 

[jfk69]

Full length sized and fully prepped 120 pieces of .35 Remington brass. Used my Lyman Xpress trimmer for the first time and after taking a few cases to get the feel of it I really like it.

Also loaded 10 round velocity ladders for my 7 mag and .280. Today I’m going to try to load a couple more ladders for my .35 and my .257 Ackley to try out some new bullet/powder combos.