UM TIKKA Scope Rings

[Cactus kid]

what NF scope is that? and do you have a length from butt to ocular?

ATACR - 4-16x42mm F1 - Nightforce Optics

The ATACR™ 4-16x42 F1 was created to maximize the potential of precision semi-automatic rifles–a need identified by U.S. military and civilian shooters.

www.nightforceoptics.com

Overall length is 12.6”.

 

[2-Stix]

ATACR - 4-16x42mm F1 - Nightforce Optics

The ATACR™ 4-16x42 F1 was created to maximize the potential of precision semi-automatic rifles–a need identified by U.S. military and civilian shooters.

www.nightforceoptics.com

Overall length is 12.6”.

I am seeking the distance from the scope ocular to the butt stock.

 

[atmat]

Progress pic… here’s a whole shit load of the Tikka 30mm LOW in progress…

Still anticipating these shipping out in the next few weeks? I’m excited to have them arrive.

 

[RussDXT]

Looking at getting these on order. I would be replacing a 419 rail. The reason I went with it in the first place was due to the casings not being able to eject when I was using standard height sportmatch.

All that being said any recommendations on height?

This is on a 300 wsm with a swfa 5-20 scope.

 

[TheViking]

Looking at getting these on order. I would be replacing a 419 rail. The reason I went with it in the first place was due to the casings not being able to eject when I was using standard height sportmatch.

All that being said any recommendations on height?

This is on a 300 wsm with a swfa 5-20 scope.

Magnification level is not pertinent when it comes to scope height, it's 100% based on objective diameter (i.e. 50mm, 42mm, etc). They have a chart on their website that gives all these details.

 

[atmat]

Magnification level is not pertinent when it comes to scope height, it's 100% based on objective diameter (i.e. 50mm, 42mm, etc). They have a chart on their website that gives all these details.

I don’t think he was implying magnification alone dictates fit. He was saying which scope model he has. A scope model with two different magnification ranges often have different measurements. The 3-15x50 and 5.5-22x50 NXS’s have differing lengths, despite both being 50mm NXS.

 

[amassi]

Looking at getting these on order. I would be replacing a 419 rail. The reason I went with it in the first place was due to the casings not being able to eject when I was using standard height sportmatch.

All that being said any recommendations on height?

This is on a 300 wsm with a swfa 5-20 scope.

The mediums


Sent from my iPhone using Tapatalk

 

[Ryan Avery]

Still anticipating these shipping out in the next few weeks? I’m excited to have them arrive.

Yes

They should start shipping the 15th.

 

[RussDXT]

Mediums ordered, hopefully it improves the trace.

 

[Ryan Avery]

Just an FYI

The preorder deal ends tomorrow.


Sent from my iPhone using Tapatalk Pro

 

[2-Stix]

Just an FYI

The preorder deal ends tomorrow.


Sent from my iPhone using Tapatalk Pro

Whats the return policy if I ordered a few sizes to get it right and needed to return what I dont need?

 

[Ryan Avery]

My policy would be if you mount them you own them....

Luckily for you, UM will take them back no questions asked.

 

[fwafwow]

Just an FYI

The preorder deal ends tomorrow.


Sent from my iPhone using Tapatalk Pro

Thanks for the reminder.

 

[Ryan Avery]

Sent from my iPhone using Tapatalk Pro

 

[PNWGATOR]

Sent from my iPhone using Tapatalk Pro

Your fingernails are sexier than ever….

 

[Reburn]

Your fingernails are sexier than ever….

Darn I was 9 minutes too slow.

 

[Ryan Avery]

Your fingernails are sexier than ever….

It’s still June Bruh

 

[PNWGATOR]

For a second…I thought they might have been @robby denning ’s.

 

[Ryan Avery]

For a second…I thought they might have been @robby denning ’s.

That’s how Mule deer hunters roll…..

 

[JCMCUBIC]

Looking at getting these on order. I would be replacing a 419 rail. The reason I went with it in the first place was due to the casings not being able to eject when I was using standard height sportmatch.

All that being said any recommendations on height?

This is on a 300 wsm with a swfa 5-20 scope.

I'm guessing your question has less to do with height needed for the objective than it has to do with clearance of the windage turret for ejected brass/rounds. What works for a capped or low profile windage turret may not work with an SWFA windage turret.....and even the cartridge used can make a difference.

I ordered lows and was planning to use a SWFA 3-9x42. I didn't consider angle of ejection when I made that order...if there's a problem, I'll play musical scopes and a S&B Klassic with capped windage will end up on it.