UM Tikka Rings vs….

nobody

WKR
Joined
Sep 15, 2020
Messages
2,117
Now this is a good point. Why on rockslide is the maven considered like gold? I must’ve missed where the maven is top of the heap now.

Short answer: zero retention matters.
 
Joined
Feb 7, 2022
Messages
34
Nearly identical option for less cash and a slightly lower mount in 30mm? Sportsmatch T084…good to a 44mm obj on the factory lite barrels.
 

False_Cast

Lil-Rokslider
Joined
Apr 1, 2017
Messages
164
Location
MI
Agree with the above. Compared to UM lows, T084 are lighter, a bit cheaper, mount the scope slightly lower and have a great/equal track record from what I’ve read. I’ve had both and much prefer the UM/Sportsmatch direct mount to a rail. Fewer fasteners to (possibly) fail, definitely lower (for factory stock purposes) and both have a recoil pin.

I’d say it’s a toss up between UM and Sportsmatch depending on your priorities but I’d take both over a rail setup.
 
OP
nksmfamjp

nksmfamjp

FNG
Joined
Feb 26, 2021
Messages
70

Short answer: zero retention matters.
Thanks for the link to the field evaluation. This form approved thing really seems to sell stuff. I hope he’s getting a cut of everything he’s bumping.
 

nobody

WKR
Joined
Sep 15, 2020
Messages
2,117
Thanks for the link to the field evaluation. This form approved thing really seems to sell stuff. I hope he’s getting a cut of everything he’s bumping.
Nope, what helps things sell is when they perform as they should. A Toyota Corolla isn’t popular because it’s cool, it’s popular because it just flat works. Scopes that work sell, it’s the reason SWFA has such a great following.
 

False_Cast

Lil-Rokslider
Joined
Apr 1, 2017
Messages
164
Location
MI
Thanks for the link to the field evaluation. This form approved thing really seems to sell stuff. I hope he’s getting a cut of everything he’s bumping.
There’s a difference between marketing and unbiased demonstrations revealing what works well/what doesn’t.
 

Marbles

WKR
Classified Approved
Joined
May 16, 2020
Messages
4,475
Location
AK
The UM rings are nice. Compared to the Sportsmatch the UM rings have more recoil pin options (so better placement options), and nitrided screws (so no rust). The Sportsmatch are lighter, lower, and cheaper for something that does the job equally well.

I like my UM rings more than my Sportsmatch.

But, I don't like moving a scope from one Tikka to another with the UM rings. You cannot put the scope on a non-T3/T3x without pulling the rings. For me, this has been enough that I'm switching over to glued on pic rails and NF UL rings. This is the most expensive approach.

For scope hight above bore (center bore to optical center)
-Sportsmatch T084 1.59 inches
-UM lows 1.65 inches
-NF UL lows (on Area419 20 MOA rail) 1.69 inches
 
Last edited:

amassi

WKR
Joined
May 26, 2018
Messages
3,939
The UM rings are nice. Compared to the Sportsmatch the UM rings have more recoil pin options (so better placement options), and nitrided screws (so no rust). The Sportsmatch are lighter, lower, and cheaper for something that does the job equally well.

I like my UM rings more than my Sportsmatch.

But, I don't like moving a scope from one Tikka to another with the UM rings. You cannot put the scope on a non-T3/T3x without putting the rings. For me, this has been enough that I'm switching over to glued on pic rails and NF UL rings. This is the most expensive approach.

For scope hight above bore (center bore to optical center)
-Sportsmatch T084 1.59 inches
-UM lows 1.65 inches
-NF UL lows (on Area419 20 MOA rail) 1.69 inches

I forget who but someone sells a tikka pic rail that has a recoil lug
If your gonna be bonding them might as well have another point of contact


Sent from my iPhone using Tapatalk
 

Marbles

WKR
Classified Approved
Joined
May 16, 2020
Messages
4,475
Location
AK
I forget who but someone sells a tikka pic rail that has a recoil lug
If your gonna be bonding them might as well have another point of contact


Sent from my iPhone using Tapatalk
Area419, Mt Tactical, and SRS rails all have recoil lugs.

The MT Tactical is 6061 aluminum as I'm bolting Ti up to them, I prefer harder material.

Area419 and SRS are both 7075 aluminum and it comes down to if you want lugs in the center section of the rail or not.
 
Top