ULUL Stainless/Portless 6x45 16" AR15 Barrel Group Buy NOW CLOSED

[KyleR1985]

I got a call back from Stu.

The tone changed quite a bit from the first conversation. Standby

 

[KyleR1985]

FWIW, PT&G's current drawing of their 6x45 reamer is yours, not something with larger dimensions. Don't know if they made something different for Satern or if there was some other issue with the chambering process if that's the issue.

https://www.pacifictoolandgauge.com/6-x-45mm-6x223-Remington-SAAMI-Chamber-Reamer_p_114481.html

Yes. That’s correct.

Turns out my ignorance and our busted first attempt at a stub job on the handi may have helped figure out the issue

 

[PistolPete]

Hey all, just heard from Stu at Satern:

Good afternoon Peter, I just got off the phone with Kyle. He brought me some information today and I showed the boss, it turns out there has been a revision on the 6x45 print with Saami that we were unaware of. So we have been running a chamber reamer that was made to the original print. Thanks to Kyle, he sent me a print of the reamer he bought and had a barrel fixed with. I'm holding on to the remaining barrels to see if we can fix them with an Alpha reamer when we get it. I can assure you we will take care of this and you all won't be left out there flapping in the wind. If you want to reach out to your crew and let them know, that would be great!Looking forward to having this resolved and everybody walking away happy.

Thanks, Kyle!

 

[Jesseb]

Hey all, just heard from Stu at Satern:

Good afternoon Peter, I just got off the phone with Kyle. He brought me some information today and I showed the boss, it turns out there has been a revision on the 6x45 print with Saami that we were unaware of. So we have been running a chamber reamer that was made to the original print. Thanks to Kyle, he sent me a print of the reamer he bought and had a barrel fixed with. I'm holding on to the remaining barrels to see if we can fix them with an Alpha reamer when we get it. I can assure you we will take care of this and you all won't be left out there flapping in the wind. If you want to reach out to your crew and let them know, that would be great!Looking forward to having this resolved and everybody walking away happy.

Thanks, Kyle!

Wow, pleasantly surprised! Hope a new reamer fixes it. Unfortunately I just finished loading up more rounds to go give it another go with the load posted earlier. 87 vmax over 24.2 Tac @ 2.280”. Also loaded 5 @ 2.375” (.020” jump) and 5 @ 2.280” over 24.2 of 8208xbr. I guess I could hold onto them for break in and testing of a new replacement barrel should they send me one.

 

[Thegman]

Hey all, just heard from Stu at Satern:

Good afternoon Peter, I just got off the phone with Kyle. He brought me some information today and I showed the boss, it turns out there has been a revision on the 6x45 print with Saami that we were unaware of. So we have been running a chamber reamer that was made to the original print. Thanks to Kyle, he sent me a print of the reamer he bought and had a barrel fixed with. I'm holding on to the remaining barrels to see if we can fix them with an Alpha reamer when we get it. I can assure you we will take care of this and you all won't be left out there flapping in the wind. If you want to reach out to your crew and let them know, that would be great!Looking forward to having this resolved and everybody walking away happy.

Thanks, Kyle!

Sounds like progress, but I'm not seeing how a smaller reamer is going to fix an oversize chamber on an already finished barrel. I wouldn't think there would be enough shoulder length and barrel length left to re-chamber to smaller dimensions. I'd think a smaller reamer would have to go a neck length deeper to fix that part. OTOH, I'm not a barrel maker, so there is that...

 

[Jesseb]

These barrels can not be re-chambered. They would have to replace the barrels.