Toyota Tundra Owners

FI460

FNG
Joined
Jan 14, 2019
Messages
35
I've driven 4 tundras quite a bit and this has never been a problem for me. OP, you know you aren't supposed to press the pedal down all the way every single time, right?

I have a 17’ and it barely ever kicks on. Basically if you are on dirt or snow/ice and you hammer it, then it comes on. I also just turn it off with one push if I’m on those surfaces. But I agree, it’s not an improvement and is annoying.

OP… is your truck lifted and/or leveled? I ask because there is a pitch and yaw sensor in the truck. People who level their tundras dead level report having much worse experience with the traction control kicking on a lot. You want to leave at least .75”-1” rake in tundras to keep that sensor happy.

I didn’t know this. I’ve got an 11 Tundra. It’s got a little rake to it still. Traction control seems to kick in a little too eagerly on curvy roads.

Anytime you lift one of these the sensor should be recalibrated. Should be an easy thing for your dealer to do.
 

IdahoBeav

WKR
Joined
Jan 29, 2017
Messages
993
I have a '14 Tacoma with all the traction control features. The only way I could see this being an issue is if you floor the accelerator every time you take off or you are driving on ice.
 

alexnelon

FNG
Joined
Feb 24, 2024
Messages
80
Location
Texas
I have never experienced this in my ‘17 but TC isn’t keeping the truck from moving, it’s the wheels spinning and having no traction. That’s kinda the whole reason they put it in.

I know the guys with blowers typically disable TC but they’re also running 305 street slicks.

Sounds like you need better rubber or a lighter foot maybe?
 

JoshOR

Lil-Rokslider
Joined
Oct 1, 2020
Messages
211
I’ve had some issues with this, not as bad as yours but definitely an annoyance. I drive an 11 as well, 2.5 “ lift or so, current tires are 34.5”, have ran 33.? “ before this set. My understanding is the computer learns your habits, and acts accordingly. If you detach the battery for a period the slate is wiped clean. After my tire change I do this, then I drive pretty agro for a a bit, off camber turns with speed etc…. Making the Nannie’s activate.. When I drive normally they dont seem near as bad. Currently having almost zero issues with them, never turn them off.. 🤷‍♂️. YMMV
 
Joined
Aug 23, 2014
Messages
5,522
Location
oregon coast
All it takes is a single pebble on pavement, a touch of ice, or even uneven pavement while trying to turn and the slip indicator starts flashing, disables the engine, and the truck won't "GO" like it should.....while traffic is coming at me while they don't expect me to pull out and then just sit there.......when I should be accelerating to the speed of traffic. It happens every day.
My first tundra was the same, bugged the heck out of me, especially in the mountains, I felt like it could get me in a bad spot, and i just didn’t like it

Our 2021 tundra doesn’t seem as sensitive as my last one, but I don’t drive it much, and not a lot of time off pavement

It’s not as bad as newer rigs jerking the wheel when it thinks you cross out of your lane, but at least that can be turned off, but it did take me a week to figure it out, haha
 
Top