The Rokslide 95 (Ruger American 😁)

[huntsman22]

If a guy is wanting a drop tested scope, he ain't looking at cheap chineesey arkens to start with.....

 

[BLJ]

I only have 8 of them, but they've been good. Boogers dial like they have eyes.

2 of them here with the same results.

 

[goalie]

They punch WASAAAAY above their pay grade, that's for sure.

 

[BigEd36]

Here is a tutorial link from a guy that is highly respected around here. Note number 6). Now read that again. It really is a 'thing'.......

Thread 'Scope mounting to maintain zero'

Sep 29, 2017

After multiple requests for an explanation of how to mount a scope in order to have the lowest possibility of loss of zero, a discussion of a scope mounting video, and the latest thread about scope bases and action screw coming loose, I took some pics of what I do with a rifle when I get it and how I mount scopes (or anything with screws).

To start- a bit of background of why I say what I say.

I am a backpack hunter. What I write below is tailored to hunting.

Having sid that, I work at a place that fires a lot of ammo. I see over half a million rounds a year on average get fired...

• Formidilosus
• Replies: 243
• Forum: Firearms

• 

Wish I had seen this a week and a half sooner. 2 weeks ago our new Rokslide 95 "twins" arrived (Ruger American Gen 2 Predator 6mm ARC), 1 for Kathy (my wife) and 1 for myself. I took my time mounting scopes, trying to do it the best I could. Using Acetone, I degreased the action, the picatinny rail, the rings, and all the screws. Mounted the rail back to the action using purple thread locker on the screws, torqued them down in 2 steps with a Wheeler FAT Wrench. The instructions that came with the scope and rings said not to use thread locker on those screws. The rings to rail screws had what looked like blue thread locker on them, so I torqued them to the specified torque, again in 2 steps, with the FAT Wrench. Lined up the scope rings the way a gunshop owner told me to do years ago, keeping the rings centered as much as possible between the turrets and the objective and ocular bells. Again, torqued the rings in 2 steps, with the FAT Wrench. Kept the gaps as even as I could tell. This is the mounting for my scope, the wife's is mounted 1 notch further to the rear of rail with the ring locations pretty much identical on the scope. Now I learn that I would have been better to have spaced them wider if possible. I got my rifle out of the safe tonight, I don't think there's quite enough space to move the rear ring back but I think I could have moved the front ring forward a notch.



Seems I'm learning this a little late. Most of the scopes I've mounted have been on 2 piece bases that never left much of any option on ring spacing, only have a few rifles with picatinny rails.