The Rokslide 95 (Ruger American 😁)

[MT_Wyatt]

Has anyone had any issue with weak ejection? My Gen 1 7.62 is getting bad again about dribbling them out after firing like an old man standing at a urinal!

I previously stripped the bolt, cleaned, and reassembled with only a small amount of white lithium grease on firing pin spring. It was better but still not as good as other Americans I’ve shot. Any tips or suggestions?

I got a gen 2 5.56 that literally just won’t eject 4 out of 5 times now.

 

[Deere_Man]

I got a gen 2 5.56 that literally just won’t eject 4 out of 5 times now.

Do you have an extractor issue or is the chamber in need of polishing?

 

[MT_Wyatt]

Do you have an extractor issue or is the chamber in need of polishing?

Not 100% sure - I think it’s extraction.

 

[Tanner]

I got a used Gen 1 5.56 1-8” from a buddy as a first center fire for my boys and just shot it yesterday. Gotta’ say; for having $700 bucks into the rifle and scope, I really like it. Shot factory 55 VMAXES into about 1” for 8 rounds. Feeding with the goofy mags they use is a little funky, but I can get over it. It should be a sweet truck rifle and one for my boys to beat around with and not worry about much. Cool little package. 75 ELDMs and TAC are next…

 

[The Guide]

I got a used Gen 1 5.56 1-8” from a buddy as a first center fire for my boys and just shot it yesterday. Gotta’ say; for having $700 bucks into the rifle and scope, I really like it. Shot factory 55 VMAXES into about 1” for 8 rounds. Feeding with the goofy mags they use is a little funky, but I can get over it. It should be a sweet truck rifle and one for my boys to beat around with and not worry about much. Cool little package. 75 ELDMs and TAC are next…

View attachment 1054572

Have the same one. Mine eats factory Hornady 73 ELDM and kills very well. Current lot shoots sub 1.25 MOA on 10 @ 2535 fps and is good to 350 to 450 depending on the density altitude. My daughter is 17 and it is her go to gun for paper, steel, fall turkey season, deer, and antelope. She takes her 6.5CM for elk.

Jay

 

[BLJ]

I got a used Gen 1 5.56 1-8” from a buddy as a first center fire for my boys and just shot it yesterday. Gotta’ say; for having $700 bucks into the rifle and scope, I really like it. Shot factory 55 VMAXES into about 1” for 8 rounds. Feeding with the goofy mags they use is a little funky, but I can get over it. It should be a sweet truck rifle and one for my boys to beat around with and not worry about much. Cool little package. 75 ELDMs and TAC are next…

View attachment 1054572

Will 75’s fit in the mag?

 

[Randle]

Ok. All the sudden mine seems to have light primer strike after around 15 rounds, chamber it again , same thing, put it in AR and it fires.
Did it with Hornady 62 grn and Black hills 77 TMK. Fire another run and no problems.
Any one have this happen?

 

[Tanner]

Will 75’s fit in the mag?

I’ve got one of those 3D printed mags that’ll handle something like 2.500”.

 

[timbernomad]

I've been thinking about grabbing one of the Glenfield-labeled rifles in 6.5 CM. 20" predator-profile barrel. Then putting it in a KRG Bravo stock. Seems like it could be an extremely capable platform with few downsides.

 

[BLJ]

Seems like it could be an extremely capable platform with few downsides.

Just cramps in your cheeks from smiling so much.

 

[Loper]

I’ve got one of those 3D printed mags that’ll handle something like 2.500”.

What magazines are you referring to? I’d love to get some.

 

[Coleredding00]

Anyone seen the Grayboe stocks? Can get some options down to 2.5 lbs, with some pretty good ergonomics.

Grayboe Flagstaff Rifle Stock | Classic Hunting Design

The Grayboe Flagstaff rifle stock offers classic styling, lightweight strength, and dependable performance for hunting rifles.

www.grayboe.com