The cartridge for the next 30 years….

FLS

WKR
Joined
May 11, 2019
Messages
824
Heirloom Rifle: Winchester Super Grade in .270. Classic cartridge in a classic rifle.
Every day shooter: Fast twist .223
 
Joined
Apr 14, 2019
Messages
1,252
Location
Fort Myers , FL
I would hate to have missed the fun I had or the things I learned experimenting with different ammo, chambering and rifle and scope set ups. I spent a lot of money but it was all part of this 45 year outdoor lifestyle. I wouldn't have missed it for anything. In the end I have found what works for me and satisfies me.
 
Joined
May 22, 2023
Messages
334
For me if I had to go to one rifle forever it was be a Tikka T3X SS threaded in 7mm08. 99.5% of my hunting is whitetail and I wouldn’t hesitate to hunt elk or moose with it. Range dependent of course. It’s just a fantastic cartridge that is under appreciated in my opinion. It won’t be the next 30 year cartridge but it would be mine.
 

EmperorMA

WKR
Joined
Dec 7, 2018
Messages
525
Easy answer for me. The 6.5 Creedmoor is ubiquitous at this point. It is the "OG" of the modern, efficient cartridges and ammo is available everywhere.
 
Last edited:

Point Man

Lil-Rokslider
Joined
Jul 7, 2023
Messages
205
Location
Ohio
At 77 I have already safe queened my JM model Marlin 45-70 Guide Gun and am now using my Ruger 77/44 for my deer hunting days. My shoulder just can't take my cast bullet reloads anymore. But man,what a beautiful shooter that Marlin is.
 

Te Hopo

Lil-Rokslider
Joined
Sep 16, 2018
Messages
198
Location
New Zealand
I'd most likely look at a Kimber Montana 6.5 Creedmor for a one and done rifle for everything I might hunt in the next 30 years.

The local shops near me have plenty of quantity and variety in 6.5 Creedmor.

Other cartridges that were once seen as very popular have fallen by the wayside, I went to buy a couple boxes of .270 the other day and they only had 2 boxes of 130gr Federal sitting on the shelf, similar with 30-06, 7Rem mag, 6.5x55.
A little more 243 and 308.
 

Wolfshead

Lil-Rokslider
Joined
Aug 10, 2022
Messages
168
46g varget loaded to max COAL 2.810. Straight out of the nosler book, pretty generic but it works great and shoots very accurately.

I use lapua brass and shoot it suppressed.
Same load I use for 150 gn. Nosler Accubonds, and Starline brass from my 20” Tikka .308 Win.
It can give me softball sized groups at 300 yds, using a rest.
Below is a six inch target on a 8.5x11 sheet of card stock
IMG_5121.jpeg
 

bradmacmt

Lil-Rokslider
Joined
Nov 14, 2014
Messages
268
Location
Mont.
46g varget loaded to max COAL 2.810. Straight out of the nosler book, pretty generic but it works great and shoots very accurately.

I use lapua brass and shoot it suppressed.
OK, what threw me off was your quoted velocity. With the same load, including Lapua brass and the 165 Accubond, I get 2,735 in a 22" barrel - 46 gr's of Varget has been my go-to with various 165's for decades. I could see getting 2,640 in an 18" barrel, but not 2,740 hence my question. Does a suppressor actually boost velocity that much?
 

thinhorn_AK

"DADDY"
Joined
Jul 2, 2016
Messages
11,219
Location
Alaska
OK, what threw me off was your quoted velocity. With the same load, including Lapua brass and the 165 Accubond, I get 2,735 in a 22" barrel - 46 gr's of Varget has been my go-to with various 165's for decades. I could see getting 2,640 in an 18" barrel, but not 2,740 hence my question. Does a suppressor actually boost velocity that much?
Don’t know. Different guns will get different velocities though. I never chrome that load suppressed or before I cut the barrel. I’m guessing if my barrel was 22” I’d get another 80-100 fps.
 

bradmacmt

Lil-Rokslider
Joined
Nov 14, 2014
Messages
268
Location
Mont.
Don’t know. Different guns will get different velocities though. I never chrome that load suppressed or before I cut the barrel. I’m guessing if my barrel was 22” I’d get another 80-100 fps.
I've used that load in 7 or 8 different 308's and never seen it go beyond 2,740. Pressure = velocity, there's no free lunch.

Thanks...
 
Joined
Dec 28, 2019
Messages
1,876
Considering I live in TN, I'm going to go with 6.5 CM. Light recoil, high BCs and SDs, good barrel life and plentiful availability of factory ammo or reloading components.
 
Top