Stocky’s Hunter VG Tikka stock

[Macintosh]

What’s the muzzle diameter? It’s not so much the barrel fitting but the bottom metal that comes on the ctr. If someone wants to send us the factory ctr bottom metal we could do a program for it.

Sounds like you have bottom metal offer. If the muzzle diameter is all you need my ctr barrel measures .785 inch just in front of the oem foreend. I’m sure theres several folks here who can measure other points on the barrel if needed.

 

[aron]

Didn't realize I needed a new rifle but now I do for the ROK stock. Excited to see stockys engage with the crowd and open to the input.

Sent from my SM-S911U using Tapatalk

 

[nephewjephew]

In for one, at a minimum

Cool to see this all come together the way it is. Cheers to all involved!

 

[JCMCUBIC]

Very cool.

Shot the current version VG a fair bit this past weekend and it's a good stock. I like it as is but putting Form's shorter reach and neg comb will be a solid improvement if the weight stays ~ the same.

Thanks for what you're producing and what you're going to produce!

 

[BjornF16]

Savage stock just shipped. I'm holding off on the Tikka stock until the ROK/WKR version is released. That will go on my "Rokslide Special"

 

[PathFinder]

I'm in for one. My 24" 6 UM came out a little on the chunky side so it needs an ultralight little brother.

 

[DoveBlaster]

I ordered one yesterday, the sale price + 10% off (10OFFMAIL) was too good to pass up. It was backordered but I will update when it arrives and if it comes with a recoil lug.

Stock was ordered mid morning 9/5/23 and was on my door step on 9/9/23.

Mountain Tactical recoil lug in the box slipped easily into place and the tolerances were so perfect I couldn't get it back out by hand. Just purchased my second Tikka in .223 today and it dropped in very nicely (the inlet is perfect). Didn't have much time for pictures but I will take some and post them when I get back home. Ill be dropping it off with my smith later this week to get chopped and threaded. Still waffling back n forth on length but I want it to be handy/ light so Ill probably go 16". I might end up at 18" but I already have a threaded 20".

Also it looks like a lot has happened since I ordered the stock. I will be putting it through its paces and seeing how it stacks up to my Allterra Gen1, KRG Bravo and XLR. Will likely order the ROK Stock when it becomes available and good on @Stockys for giving the people what they want. Formadildo and Ryan wont point you in the wrong direction but my .02 are keep it light (end user can bolt on whatever accessories are wanted) and same price point.

 

[ID_Matt]

I vote the ROK stock should only be available in 1 color... carbon/rokslide green.

 

[nobody]

I vote the ROK stock should only be available in 1 color... carbon/rokslide green.

With the Rokslide logo cast into the Limbsaver pad

 

[kswaterfowl]

I vote the ROK stock should only be available in 1 color... carbon/rokslide green.

Good thing I have spray paint.

 

[ResearchinStuff]

With the Rokslide logo cast into the Limbsaver pad

Or WKR

 

[DangerRanger]

I vote the ROK stock should only be available in 1 color... carbon/rokslide green.

I vote shitty green krylon

 

[Tahoe1305]

10800 is 3/8 too short. The 10809 is about 1/32 too long so there’s a tiny bit of overhang


Sent from my iPhone using Tapatalk

Arrived and confirmed. 10800 is a tad short. Holes don’t line up either. Looks like there’s enough material on the stockys to drill new holes but with the small shortage on the bottom I don’t think I want to go that route.

Maybe try 10809.

 

[amassi]

Arrived and confirmed. 10800 is a tad short. Holes don’t line up either. Looks like there’s enough material on the stockys to drill new holes but with the small shortage on the bottom I don’t think I want to go that route.

Maybe try 10809.

The holes on the 10809 don’t line up either, you’ll need to drill 2 more. They’re far enough apart there’s plenty of carbon to drill into.
I can send pics when I get home
My stock had a pretty big foam void under the recoil pad so I filled it with expanding foam and used jb quik weld on everything for a solid surface (probably definitely overkill)


Sent from my iPhone using Tapatalk

 

[Tahoe1305]

The holes on the 10809 don’t line up either, you’ll need to drill 2 more. They’re far enough apart there’s plenty of carbon to drill into.
I can send pics when I get home
My stock had a pretty big foam void under the recoil pad so I filled it with expanding foam and used jb quik weld on everything for a solid surface (probably definitely overkill)


Sent from my iPhone using Tapatalk

I printed the 809 template and am comparing. It appears that the lower half is wider in width as well as length a bit. Is that true?

Good info on the drilling. Also appears LOP will increase to about .3-.5”.

 

[Jimbee]

2 different barrel contours, the black web stock is factory barrel/factory contour. The textured paint stock is the sendero contour/.750 PBB straight contour.

 

[Jimbee]

I took the butt pad off and wasn't able to screw it back on so I super glued it. The machine screws that held it on didn't have anything to thread back into.

 

[nobody]

2 different barrel contours, the black web stock is factory barrel/factory contour. The textured paint stock is the sendero contour/.750 PBB straight contour. View attachment 600509View attachment 600510View attachment 600511View attachment 600512

Thanks for the visual on the .750 Taperless, that’s the direction my impending rebarrel is headed so it’s good to see how it lines up in the Sendero barrel channel

 

[amassi]

Arrived and confirmed. 10800 is a tad short. Holes don’t line up either. Looks like there’s enough material on the stockys to drill new holes but with the small shortage on the bottom I don’t think I want to go that route.

Maybe try 10809.

10809 not fully tightened yet still going to paint etc

Sent from my iPhone using Tapatalk

 

[Jimbee]

10809 not fully tightened yet still going to paint etc

Sent from my iPhone using Tapatalk

Was there substantial material to hold the screws for the airtech, or did you add anything?