Stocky’s Hunter VG Tikka stock

Tahoe1305

WKR
Joined
Jun 9, 2019
Messages
2,189
Location
CO
10809 not fully tightened yet still going to paint etc
746742a2fece15eb8d48cb20fc73a058.jpg



Sent from my iPhone using Tapatalk
That looks much better than 10800
 

Tahoe1305

WKR
Joined
Jun 9, 2019
Messages
2,189
Location
CO
The bright white line is the unfinished quik weld.
Fwiw I only swapped it out for the length, recoil wasn’t the issue


Sent from my iPhone using Tapatalk
That’s good to hear. I like the length on mine and recoil doesn’t bother me. But I’m a fan of those airtechs and “assumed” it would be a worthy upgrade.
 

amassi

WKR
Joined
May 26, 2018
Messages
3,882
Air techs a nice pad
This is just a 6cm right now but will likely be a 6 um soon, I don’t have a muffler and don’t hunt with a brake so the air tech will come in handy eventually


Sent from my iPhone using Tapatalk
 

amassi

WKR
Joined
May 26, 2018
Messages
3,882
Was there substantial material to hold the screws for the airtech, or did you add anything?

When I took the oem pad off -the carbon shell only covered the top and bottom 1/4 of the butt pad and there was a void in the foam so I filled the gap with expanding foam shaped it flush then covered the whole butt with jb quik weld, I filled the oem screw holes until it spurted out. I’ll sand this flat then when I’m done with paint and attach the air tech for good I might glue it on as well as screws.
cfb49e4a1fab1e5a5e2f2bcf90ce9cbc.jpg



Sent from my iPhone using Tapatalk
 

Tullis94

WKR
Joined
Jan 9, 2016
Messages
334
I took the butt pad off and wasn't able to screw it back on so I super glued it. The machine screws that held it on didn't have anything to thread back into.
Mine screwed back in no problem but I know what you're talking about. That little bit of carbon doesn't give much to screw to and would strip out easily. I filled my stock with sprayfoam to get rid of the hollow sound and then used jb weld to glue and screw the pad back on.
 

JDBAK

Lil-Rokslider
Joined
Dec 12, 2019
Messages
172
I’m down for 2.
A CTR compatible version and a normal. Although I’ve heard that a CTR stock will also accept standard Tikka trigger guard and mag, just with a gap on the sides.

The ability to mount and Arca plate is a must for me. Integrated Arca would be nice, but as long as it will accept one that’s okay too.

Adjustable LOP by a spacer system would be a huge benefit for me and my kids.
 
Joined
Jan 27, 2017
Messages
457
Location
UT
Regardless of my personal situation, I'm in for at least 1 ROK STOCK...but maybe up to 3. As already mentioned, please keep them light, simple and reasonably priced/ affordable if at all possible 😁
Thanks!
 

Grumman

WKR
Joined
Jan 30, 2016
Messages
1,642
Location
Kentucky
I’d say my son will get a lefty version also. IF they could be made to fit a Limbsaver Airtech pad that would be a win.


Sent from my iPhone using Tapatalk
 
Top