Silencerco Scythe TI review

[ScienceNerd]

Exactly. We don’t have a Scythe problem, it’s a Magnum problem. Convince me I’m wrong

The manufacturer needs to change their specs if these are not suitable for magnums. I have had two separate into two part on me now. 300 PRC, 22in barrel, shooting great, normal loads/velocity until one shot and I have half a supressor left on my gun. It is a Scythe problem until the manufacture grows a pair and admits the supressors are not performing to their spec.

 

[B_Reynolds_AK]

The manufacturer needs to change their specs if these are not suitable for magnums. I have had two separate into two part on me now. 300 PRC, 22in barrel, shooting great, normal loads/velocity until one shot and I have half a supressor left on my gun. It is a Scythe problem until the manufacture grows a pair and admits the supressors are not performing to their spec.

Of course, especially for someone in your position, that was potentially put in harms way.
My post was satire.

 

[DisplacedHusky]

Be careful what you wish for on SilencerCo changing their barrel length limitations because unless they implement a grandfather policy to previously sold Scythes, you wind be able to shoot it on some of the rifles you purchased it for.

They did something similar to the Harvester Evo in between when I purchased it and when I got it approved. I was hoping it could do double duty on my 10.5” AR but SilenceCo changed the 5.56 barrel length rating.

 

[wind gypsy]

Be careful what you wish for on SilencerCo changing their barrel length limitations because unless they implement a grandfather policy to previously sold Scythes, you wind be able to shoot it on some of the rifles you purchased it for.

They did something similar to the Harvester Evo in between when I purchased it and when I got it approved. I was hoping it could do double duty on my 10.5” AR but SilenceCo changed the 5.56 barrel length rating.

In something like that, i'd hope they'd at least warranty serial #'s based on the rating that was published at time of purchase rather than what the derate came to.

 

[DisplacedHusky]

In something like that, i'd hope they'd at least warranty serial #'s based on the rating that was published at time of purchase rather than what the derate came to.

They didn’t seem to care when I contacted SilencerCo about my Harvester Evo barrel restriction change.

 

[Dualsight]

Not what he said. He said "compares better to".

In other words the TBAC 7 is similar in performance as to be comparable to the Scythe Ti. He never said Scythe Ti was better than TBAC 7.

From the wording I read it differently. Thank you for the correction, and I should not have put my assumed correction in quotations.

 

[ColPenguin]

From the wording I read it differently. Thank you for the correction, and I should not have put my assumed correction in quotations.

I understand how you interpreted it that way. I promise I'm not trying to be a dick about it.

 

[Q_Sertorius]

I still haven’t had a chance to shoot my Scythe because I am still awaiting my barrel from PAC-Nor. They called me today and told me I will need to get an adapter for it from 1/2-5/8. Any recommendations as to the best adapter to get?


____________________
“Keep on keepin’ on…”

 

[coast2coast]

I still haven’t had a chance to shoot my Scythe because I am still awaiting my barrel from PAC-Nor. They called me today and told me I will need to get an adapter for it from 1/2-5/8. Any recommendations as to the best adapter to get?


____________________
“Keep on keepin’ on…”

Wouldn’t you be better off to just get a 1/2 x 28 direct thread mount?

Bravo Direct Thread Mount

The Bravo Direct Thread Mount is the simple suppressor mounting solution for almost any firearm. Compatible with Omega 300, Harvester Evo, and Hybrid 46

silencerco.com

 

[thinhorn_AK]

I still haven’t had a chance to shoot my Scythe because I am still awaiting my barrel from PAC-Nor. They called me today and told me I will need to get an adapter for it from 1/2-5/8. Any recommendations as to the best adapter to get?


____________________
“Keep on keepin’ on…”

Ive had several of them, I don’t think any were any better or worse than the others. They all did the same thing and one of them caused any issues.

 

[coast2coast]

Wouldn’t you be better off to just get a 1/2 x 28 direct thread mount?

Bravo Direct Thread Mount

The Bravo Direct Thread Mount is the simple suppressor mounting solution for almost any firearm. Compatible with Omega 300, Harvester Evo, and Hybrid 46

silencerco.com

Here’s the titanium version.

TITANIUM BRAVO DIRECT THREAD MOUNT - SilencerCo

*New Titanium Direct Thread Mount. It's lighter, higher performing, and a simple solution to attach our silencers to any firearm.

silencerco.com

 

[Tmac]

I still haven’t had a chance to shoot my Scythe because I am still awaiting my barrel from PAC-Nor. They called me today and told me I will need to get an adapter for it from 1/2-5/8. Any recommendations as to the best adapter to get?


____________________
“Keep on keepin’ on…”

This place was recommended to me.

1/2 x 28 to 5/8 x 24 Barrel Thread Adapter Standard Barrel Dia With Thread Protector Black #4247

www.downrangeproductsco.com

 

[thinhorn_AK]

This place was recommended to me.

1/2 x 28 to 5/8 x 24 Barrel Thread Adapter Standard Barrel Dia With Thread Protector Black #4247

www.downrangeproductsco.com

That’s a good place to get thread protectors from too.

 

[Q_Sertorius]

This place was recommended to me.

1/2 x 28 to 5/8 x 24 Barrel Thread Adapter Standard Barrel Dia With Thread Protector Black #4247

www.downrangeproductsco.com

Thank you. That was very helpful and probably saved me some money.


____________________
“Keep on keepin’ on…”

 

[HighUintas]

I second the downrange products adapters. Free shipping on everything.

 

[Bluefish]

I still haven’t had a chance to shoot my Scythe because I am still awaiting my barrel from PAC-Nor. They called me today and told me I will need to get an adapter for it from 1/2-5/8. Any recommendations as to the best adapter to get?


____________________
“Keep on keepin’ on…”

Pretty sure it’s a hub mount. Just get a different one and it will screw right on the barrel.

 

[stevie]

You can purchase a Bravo titanium 1/2x28 direct tread from silencerco.

 

[Gynaroo]

OCL is doing their 1/2x28 hub DT for 30 bucks until they run out of them. Titanium.

 

[Trackselk]

OCL is doing their 1/2x28 hub DT for 30 bucks until they run out of them. Titanium.

Anyone have a weight on the competition (sico ti 1/2 28")?
*and thanks!

 

[Tahoe1305]

OCL is doing their 1/2x28 hub DT for 30 bucks until they run out of them. Titanium.

Huge win. Thanks. Folks better jump on these.