Savage 110 ultralight (proof barrel)

Elite

WKR
Joined
Sep 4, 2018
Messages
1,084
Man that’s all up to the shooter. I will tell you when I got it I put an 11oz Swaro z3 with Talley lightweight rings on it and shot 20 rounds through it at the range. I actually mentioned to my brother the recoil was much less than I expected(not sure why)

It felt much less than a Ruger M77 .300WSM I had. Also felt less than my .270.

Then I put a break on it and it was so sweet! Although freaking loud!!

Then I put a Banish 33 Silencer, in the 7” configuration, on it and it’s a freaking dream! Although a little long yet I’ve been carrying it in open country for the last couple months with no issues. In the thick stuff it’s a pain in the ass.

All this was with factory 185-200grn ammunition.

Thanks For the comparison and input, that was in 300 wsm? I would love a silencer but not aloud them here and I am thinking a brake will be to much noise when a quick shot is presented


Sent from my iPhone using Tapatalk
 

plentycoupe

Lil-Rokslider
Joined
Jan 1, 2013
Messages
267
Thanks For the comparison and input, that was in 300 wsm? I would love a silencer but not aloud them here and I am thinking a brake will be to much noise when a quick shot is presented


Sent from my iPhone using Tapatalk
It is a .300WSM
 

MooreAK

FNG
Classified Approved
Joined
Jan 7, 2020
Messages
57
I think Mesa Precision is making a stock for the ultralight very soon!


It looks like there available for purchase. Only in short action though. Has anyone heard if there going to make a long action ? I e-mailed but never got a response. Looks like pretty good option.
 

plentycoupe

Lil-Rokslider
Joined
Jan 1, 2013
Messages
267
Shoot, I was hoping that was false


Sent from my iPhone using Tapatalk
This is what I do. Two in the mag, one in the chamber and two right there.
 

Attachments

  • 4CD80B19-26B8-4A49-8A5B-F0FC98A8E816.jpeg
    4CD80B19-26B8-4A49-8A5B-F0FC98A8E816.jpeg
    96.5 KB · Views: 35

Elite

WKR
Joined
Sep 4, 2018
Messages
1,084
Does anyone own of these in a 280ai? Was hoping for a 300 wsm but the longer bullet and mag capacity is making me think twice. I am wondering how much length is available in the magazine for the longer bullets that can be used in hand loading? And also wondering what kind of fps everyone is seeing with the 22” barrel


Sent from my iPhone using Tapatalk
 

Breddoch

Lil-Rokslider
Joined
May 30, 2018
Messages
156
Does anyone own of these in a 280ai? Was hoping for a 300 wsm but the longer bullet and mag capacity is making me think twice. I am wondering how much length is available in the magazine for the longer bullets that can be used in hand loading? And also wondering what kind of fps everyone is seeing with the 22” barrel


Sent from my iPhone using Tapatalk

Attached are photos of a 280 AI with the following load:

160 grain accubond
3.330 OAL
61.2 gr H4831
BR2 primer
2810 fps very consistent
 

Attachments

  • E8A81F90-E341-4CD2-968B-2594D75DD249.jpeg
    E8A81F90-E341-4CD2-968B-2594D75DD249.jpeg
    179.2 KB · Views: 22
  • 3CEE28AE-9A3D-42FB-8FF8-D7939F8F74DF.jpeg
    3CEE28AE-9A3D-42FB-8FF8-D7939F8F74DF.jpeg
    148.7 KB · Views: 22

Elite

WKR
Joined
Sep 4, 2018
Messages
1,084
Attached are photos of a 280 AI with the following load:

160 grain accubond
3.330 OAL
61.2 gr H4831
BR2 primer
2810 fps very consistent

Have you been able to build any faster loads? Was hoping for a bit more fps with a 160


Sent from my iPhone using Tapatalk
 
Joined
Sep 20, 2018
Messages
7,571
Location
In someone's favorite spot
Late to the party but I finally got my Savage Ultralight - in .308.

In a moment of weakness, I also bought a takeoff Ultralight Proof Research barrel in 6.5 CM.

The .308 is shooting lights-out and has quickly become my primary hunting rifle.
 

Bomberodevil

Lil-Rokslider
Joined
Feb 17, 2018
Messages
103
Location
Phoenix, AZ
Have you been able to build any faster loads? Was hoping for a bit more fps with a 160


Sent from my iPhone using Tapatalk
H4831, 59.1, .505 moa, 2975 fps, Hornady ELDX, 162 grains, .030 off lands, Nosler brass, Federal 210m, 1700 ft elevation, 78 degrees, SD 16
 

Breddoch

Lil-Rokslider
Joined
May 30, 2018
Messages
156
Have you been able to build any faster loads? Was hoping for a bit more fps with a 160


Sent from my iPhone using Tapatalk
The factory 155 terminal ascent shot closer to 2900. I considered trying H4350 with the 160 accubond to get the velocity up but the H4831 load was so accurate and consistent that I stuck with it. I plan to tinker with it some more in the coming off season.
 
Joined
Sep 20, 2018
Messages
7,571
Location
In someone's favorite spot
Just ordered a Stocky's carbon fiber stock for my Savage. Pricey, but it's my Christmas gift to me. Will let y'all know how it fits and works (and weighs). Should get my rig down to 6 lbs. 6 oz. scoped
 

Elite

WKR
Joined
Sep 4, 2018
Messages
1,084
Just ordered a Stocky's carbon fiber stock for my Savage. Pricey, but it's my Christmas gift to me. Will let y'all know how it fits and works (and weighs). Should get my rig down to 6 lbs. 6 oz. scoped

Do you know what the original stock weighs?


Sent from my iPhone using Tapatalk
 
Top