Maven RS1.2 2.5-15x44 new model

[Bluumoon]

@Bluumoon

These work.

Metric Buna O-rings 20 x 1.2mm Minimum 25 pcs

13mm ID x 15.4mm OD x 1.2mm CS-Price for 25 pcs

oringsandmore.com

Thanks, @Shortschaf

I think these will work just fine.

 

[RWT]

$8.45 shipped. Worth it as I have 4 of these scopes. Considering a 5th unless the Rokscope is released in the next quarter.

 

[Bluumoon]

$8.45 shipped. Worth it as I have 4 of these scopes. Considering a 5th unless the Rokscope is released in the next quarter.

Or send me a pm and I’ll drop some in an envelope. I think I have 22 to spare.

 

[RWT]

Or send me a pm and I’ll drop some in an envelope. I think I have 22 to spare.

Thank you for the offer but I already ordered them. They made it easy with PP. if I had to get out of the recliner to grab my wallet I would be PMing.

 

[Nine Banger]

I think these will work just fine.

Nice cinematography.

I tried to make a similar one when I got mine but my kids couldn't stop hooting and hollering for 20 seconds.

 

[dårlig jeger]

These were spot on. Perfect snug fit.

I have~17 left. I'm happy to start a pay it forward deal where I mail what I have left to someone, who uses what they need and then mails what's left to the next person.

 

[swavescatter]

I think these will work just fine.

Do they no longer have a tactile click?

 

[dårlig jeger]

Do they no longer have a tactile click?

Mine definitely do. It's just more swfa ish than oe maven.

 

[Legend]

These were spot on. Perfect snug fit.

I have~17 left. I'm happy to start a pay it forward deal where I mail what I have left to someone, who uses what they need and then mails what's left to the next person.


View attachment 1002687View attachment 1002688

I am down for a pay it forward relay. I will pm you my address and we can figure out the details. Thanks!

 

[mxgsfmdpx]

I think these will work just fine.

Your lack zero stop is giving me anxiety.

 

[Bluumoon]

Your lack zero stop is giving me anxiety.

It’s a couple mil below. When/if I change loads/rifle I don’t have to reset it

 

[Bluumoon]

Do they no longer have a tactile click?

They still click. They just behave as they should.

 

[Bluumoon]

Nice cinematography.

I tried to make a similar one when I got mine but my kids couldn't stop hooting and hollering for 20 seconds.

Most of my videos have kids/dogs/spouse doing crap in the background.

 

[Ryan_1129]

They still click. They just behave as they should.

Do I need some of these if I just ordered the maven rs1.2

 

[Shortschaf]

Do I need some of these if I just ordered the maven rs1.2

Yes. These are not the factory orings. "Need" is a strong word, but I think you will prefer a tighter turret than factory

 

[flyfisher117]

Do I need some of these if I just ordered the maven rs1.2

Give it a try without.

The factory knurl on the turret is quite aggressive. Which is good because it’s easy to hold onto it. It can be bad because it’s easier to brush against and have it turn unnoticed.

I had mine turn rubbing on a bush I walked past. Lashed to my pack I haven’t had it turn yet but I have had other scopes that would.

 

[dårlig jeger]

I am down for a pay it forward relay. I will pm you my address and we can figure out the details. Thanks!

In the mail today.

For those that try these and decide they are too stiff, similar to the swfa turrets, add a bit of silicone based lubricant to the ring. That should get you in the middle.

 

[Bluumoon]

Do I need some of these if I just ordered the maven rs1.2

The scopes are routinely found to have moved off zero during hunting, enough that it could cause a miss. If it was a range toy it wouldn’t bother me and factory ring would be the preference.

 

[Ryan_1129]

The scopes are routinely found to have moved off zero during hunting, enough that it could cause a miss. If it was a range toy it wouldn’t bother me and factory ring would be the preference.

The scopes are routinely found to have moved off zero during hunting, enough that it could cause a miss. If it was a range toy it wouldn’t bother me and factory ring would be the preference.

I gotcha, mostly because of hitting brush or rubbing against a tree? It looks like they do great on the drop test and getting banged around in a vehicle, but the turret gets moved easily which is annoying if you are walking in to hunt and pull up on an animal. I believe that’s what you’re saying right? I’ll just order some of these o-rings just in case

 

[Nine Banger]

I gotcha, mostly because of hitting brush or rubbing against a tree? It looks like they do great on the drop test and getting banged around in a vehicle, but the turret gets moved easily which is annoying if you are walking in to hunt and pull up on an animal. I believe that’s what you’re saying right? I’ll just order some of these o-rings just in case

In my life mostly because:
- shoving rifle into and pulling it out of a zipper case under the back seat of my truck
- carrying it in one arm muzzle down, tucked under my arm
- I had it spin one time when I was passing it to my other arm across my chest and it hit my bino harness or pack straps

When you're in the field it happens once a day or so, sometimes more.

When it happens to you it will ruin your confidence in the system.

Oring is a huge improvement.