Maven RS1.2 2.5-15x44 new model

[z987k]

One of these two.

https://www.zoro.com/zoro-select-backup-ring-0086w-0702-id-pk100-3gcr6/i/G2214274/

https://www.zoro.com/zoro-select-backup-ring-0086w-0893-id-pk100-3gcr9/i/G2900947/

A side rant, because I'm sick of AI slop. I type in 0.75x0.053 o-ring. Googles AI says this matches a standard O38 o-ring size. An O38 is 1/16th, or 0.0625. So, wrong and worthless. Every time someone says xxx AI program says...... I just want to cram a dirty sock down their throat and wrap their face in duck tape leaving only the nose sticking out and tell them to have fun taking it off.

Every time someone posts some ai synopsis I block them. They clearly have nothing of any value to add themselves and have outsourced their actual brain to someone else
If I wanted some Ai slop for discussion id go use it myslelf.

 

[Nine Banger]

Im not sure any of these will work if I am being honest.
All three are rectangular seals, so you have to be careful with "thickness" terms..

Good catch.

 

[willfrye027]

One of these two.

https://www.zoro.com/zoro-select-backup-ring-0086w-0702-id-pk100-3gcr6/i/G2214274/

https://www.zoro.com/zoro-select-backup-ring-0086w-0893-id-pk100-3gcr9/i/G2900947/

A side rant, because I'm sick of AI slop. I type in 0.75x0.053 o-ring. Googles AI says this matches a standard O38 o-ring size. An O38 is 1/16th, or 0.0625. So, wrong and worthless. Every time someone says xxx AI program says...... I just want to cram a dirty sock down their throat and wrap their face in duck tape leaving only the nose sticking out and tell them to have fun taking it off.

Haha, AI has been good for business on my end. Lots of folks AI their symptoms and are pretty motivated to come to the ER in the middle of the night. Although it feels harder to convince folks that AI is not giving them accurate information than it was to convince them the medical website they are on is not legit..

Same garbage is getting regurgitated by AI that is on the medical clickbait sites for the most part.

Total digression here but thanks for posting on the turrets, I need to “fix” mine this winter as well.

 

[Marbles]

Im not sure any of these will work if I am being honest.
All three are rectangular seals, so you have to be careful with "thickness" terms..

Well, now I feel dumb for not noticing that.

So, stretch reduces cross section. How much stretch are you getting on that 0.053 ring?

An undersized 1.5 mm ring should stretch to a smaller CS. Apparently the percent reduction in CS is about 1/2 the percent of stretch. So a 22 mm x 1.5 mm ring will have about 0.053 thickness on the Maven.

 

[Marbles]

Alternatively would be a 1.2 mm x 26 mm. Would be thinner than an over stretched 1.5 mm.

 

[Shortschaf]

Alternatively would be a 1.2 mm x 26 mm. Would be thinner than an over stretched 1.5 mm.

My brother in Christ, as someone who understands poisson's ratio and could figure the diameter after stretching, I'm just gonna throw the Orings in and report back