Looking for Tikka 243 8 twist pet loads

[NickT406]

Both of these loads shoot in my 1:8 tikka. 108 eldm
H4350 41 grains
.050 off

108 eldm
4831sc 44.5
.050 off

 

[NickT406]

Here's 6.5staball and 108s. I'd have to look for charge weight. View attachment 805690

Interested in charge weight if you find it. I have an 8lb jug of staball 6.5 I need to start burning.

 

[Jimbee]

Interested in charge weight if you find it. I have an 8lb jug of staball 6.5 I need to start burning.

I'm using 42 grains.

 

[MT-nuffgun]

Both of these loads shoot in my 1:8 tikka. 108 eldm
H4350 41 grains
.050 off

108 eldm
4831sc 44.5
.050 off

What kind of speed are you getting out of the 4831sc load? Hornady lists max at 47.1 for the 108 out of a .243.

 

[bcmntgoathunter.]

What charge weight of h4350? Somewhere in the 41.3-41.9 range should produce sub-.5" 5 shot groups assuming the shooter is up to it.

Ill check the notes but I'm pretty sure we ran from 39-42 h4831sc shot a touch better and we're about to try h1000 on sat , and possibly some 90 grain eldx as the store was sold out of 103s

 

[Brandon.miller.4]

@Tcmo-33 has a good load with 108s.

 

[sierracharlie338]

Bottom left hole from another target. Load data in pic. Start low work up….

 

[NickT406]

I think velocity’s were right around the same as my h4350 load. Factory barrel cut at 16” 2760fps
I stuck with h4350 because I had more of it and accuracy was the same.
Maybe Hornadys info is correct but I felt weird about adding more powder when I was already compressed.