Air Lock Industries Suppressor

[Marbles]

I like the Precision Armament adapters, very minimal profile and no issues on 3 different rifles.

Some adapters add length, so don't forget to consider that.

 

[Choot]

Broke in the new um tikka 6 creed and airlock this evening. Couldn’t be happier

 

[RAM190Hog]

Broke in the new um tikka 6 creed and airlock this evening. Couldn’t be happier
View attachment 943650

That is a sweet setup. How much does that whole setup weigh?

 

[Choot]

That is a sweet setup. How much does that whole setup weigh?

Thanks. I think it was 8lb 6oz.

 

[Presswood_936]

Carrying the airlock in the field has been a delight . Got a pronghorn this morning

 

[Schroedernd]

Carrying the airlock in the field has been a delight . Got a pronghorn this morning View attachment 944393

Thats awesome. I need a ton of pts in OR to get a decent rifle draw tag for antelope. What caliber you use?

 

[Tanner]

Anybody that has used both or been around both, care to comment on the airlock versus an Otter Creek Hydrogen K? Both have caught my eye as a dedicated hunting can. Comparable specs and weight between the two.

 

[Presswood_936]

Thats awesome. I need a ton of pts in OR to get a decent rifle draw tag for antelope. What caliber you use?

A 22” tikka 6.5 prc

 

[OP101]

A 22” tikka 6.5 prc

Did you start with a 24” barrel and were able to cut down 2” without going into the fluting? Still able to thread to 5/8” at that location?

 

[Presswood_936]

Did you start with a 24” barrel and were able to cut down 2” without going into the fluting? Still able to thread to 5/8” at that location?

That’s exactly what I did . It’s a veil wideland

 

[Harvey_NW]

That’s exactly what I did . It’s a veil wideland

Same. My muzzle shoulder is a bit closer to the flutes and measures about 21 1/2" from the tenon shoulder to muzzle.

 

[pods8 (Rugged Stitching)]

Did you start with a 24” barrel and were able to cut down 2” without going into the fluting? Still able to thread to 5/8” at that location?

FYI you can cut into the flutes and have an adapter or shoulder added on as needed.

 

[OP101]

Awesome yeah thanks all for the responses a picture - don’t want to derail. I’m ordering a 20” tikka from EuroOptics and wanted to cut it down to 18” and not go into the flutes. Just wasn’t sure how much of a cut I could get without going into the flutes, but was hoping for 2” and then finishing with the Airlock.

I agree @pods8 (Rugged Stitching), definitely have seen people cut into the fluting and add a shoulder as you described. I’m hoping to avoid the flutes just for my own personal aesthetic preference. Will probably end up at 16” into the flutes in the future

 

[pods8 (Rugged Stitching)]

Awesome yeah thanks all for the responses a picture - don’t want to derail. I’m ordering a 20” tikka from EuroOptics and wanted to cut it down to 18” and not go into the flutes. Just wasn’t sure how much of a cut I could get without going into the flutes, but was hoping for 2” and then finishing with the Airlock.

I agree @pods8 (Rugged Stitching), definitely have seen people cut into the fluting and add a shoulder as you described. I’m hoping to avoid the flutes just for my own personal aesthetic preference. Will probably end up at 16” into the flutes in the future

Once its screwed up against a can, esp. if there is a cover on it, you won't even notice imho.

This is a 223 threaded 1/2" both because of the flutes and also because some 223 cans are 1/2" threads so I retained the option to use them.

 

[satchamo]

Once its screwed up against a can, esp. if there is a cover on it, you won't even notice imho.

This is a 223 threaded 1/2" both because of the flutes and also because some 223 cans are 1/2" threads so I retained the option to use them.
View attachment 944542

I did this same thing my 243 just like this and she still shoots better than me. Mine was a roughtech

 

[OP101]

Once its screwed up against a can, esp. if there is a cover on it, you won't even notice imho.

This is a 223 threaded 1/2" both because of the flutes and also because some 223 cans are 1/2" threads so I retained the option to use them.
View attachment 944542

Yes looks great

 

[Timjohnson11]

Broke in the new um tikka 6 creed and airlock this evening. Couldn’t be happier
View attachment 943650

Rokslide (super) special right there, well done

 

[Graves14]

Broke in the new um tikka 6 creed and airlock this evening. Couldn’t be happier
View attachment 943650

This is a slick setup!

 

[skipper907]

So where is the comparison of the airlock 6.5 to the OG 6.5 ?
With the group buy on UK suppressors going the 6.5 OG is tempting @750

 

[Timjohnson11]

So where is the comparison of the airlock 6.5 to the OG 6.5 ?
With the group buy on UK suppressors going the 6.5 OG is tempting @750

I don’t believe we’ve seen one. Based on specs, I’d anticipate the edge going to the Airlock 6.5 assuming the intended use case is that of a hunting can.

I too am in a pickle between the two… $850 for the Airlock 6.5 or $750 for the OG 6.5…. Decisions!