.25 Cal (Quarter Bore) / Big Game Success - 25 Creed, 25-284, 25-06, 25 PRC, 25 SAUM

Ok, with Black Friday sales I’m going to order neck/shoulder bushings for SAC dies for my upcoming 25 builds.

25 creed using resized 1x fired Lapua 6creed brass.
25 PRC using new Lapua 6.5 PRC brass
Or
25-7PRC using new WTO headstamped ADG brass.

Anyone have real life neck diameters of loaded rounds for me to start with?
25/6.5prc lapua new brass1000003864.jpg
25/6.5prc adg 2nd loading1000003865.jpg
 
This is from a .25-06, 117-grain Sierra BTSP Federal Premium factory load. Actual muzzle velocity of ~2898 FPS. Broadside double lung shot on whitetail buck at 80 yards. Deer ran approximately 70 yards before tumbling and rolling down the ridge. Great blood trail.

b04aaf3a964c843755522ec1c8141158.jpg

1a8b440af37c2586d72182e9ac99ceba.jpg

651e4f0d4fdcf0bf75dae757b94cebf9.jpg
 
I have a friend that has one shooting 135 Berger's and it flat hammered the two big bucks he sent me videos of shooting. One was at 375 and I think the other was somewhere around 600. He's launching those 135's right around 3175-ish.
Thats awesome i hammered a few hogs with the 131s in my 25 saum earlier this week. These high bc 25 cal bullets are awesome
 
I’ve been debating between getting a 25-06ai barrel and a 25-284 for a tikka 270 that I don’t enjoy all that much. The 25-06 will need a longer mag or stuffing the bullet super deep to get it to feed, which is why I’ve been leaning more towards the 25-284. Does Anyone with a preferred barrel blanks prefit know what reamer they use? Could I load a 134 or 128 out long and take advantage of the long action?
 
Any of you guys wanting to do a 25cm on a tikka check out this pre order deal need a few more to make it happen
 
I’ve been debating between getting a 25-06ai barrel and a 25-284 for a tikka 270 that I don’t enjoy all that much. The 25-06 will need a longer mag or stuffing the bullet super deep to get it to feed, which is why I’ve been leaning more towards the 25-284. Does Anyone with a preferred barrel blanks prefit know what reamer they use? Could I load a 134 or 128 out long and take advantage of the long action?
I have a pbb 25-284 barrel and another on order. They use the blackjack reamer for the 131 ace. Works great with 133 berger and 134 eldm, can load them long. My barrel is on a tikka with the LA bolt stop.
 
An interesting difference with the new .257 bullets and adherents, I see more of you lookiing to use larger cases and working toward high velocities. I have a 257 Roberts and shot a 25-06 barrel out of one of the first year model 700's Remington put out. I rebarreled that rifle to 270 because with bullets available at the time the 270 had more of everything. However the 25-06 was an awesome coyote, Antelope and Mule deer round.
 
Back
Top