What did you do in the reloading room today?

All- I snuck out to the backyard 100 yard range to test 6.5 WSM MV and group with 68 grains of N565.

Below is the Athlon summary-
Avg MV- 3160
Min- 3144
Max- 3184
SD-12.7
ES-40

10 shot group was just under 1" at 100 yards, and for me this load is done.
 

Attachments

  • 6.5 WSM ADG brass 68 grains N565 147 ELDM.jpeg
    6.5 WSM ADG brass 68 grains N565 147 ELDM.jpeg
    131.8 KB · Views: 17
  • 68 grains N565.jpeg
    68 grains N565.jpeg
    248 KB · Views: 17
  • 68 grains N565_2.jpeg
    68 grains N565_2.jpeg
    222.5 KB · Views: 18
6mm Day:
6 ARC - 105 BTHPS - 120 rounds using TAC and CFE - practice ammo.
243 Win - 108 Eldm's - 20 rounds using Staball 6.5. Looking for a temp stable hunting load. I started with Staball because it was the fastest temp stable powder I had in stock in Hornady's load data.
 
Just started reloading for first time today. My kid learned last summer and got most of the tools needed. I bought the benches and components. Reloaded my first rounds today. Case prepped some once shot brass and ran them all the way thru on a pet load my kid has worked up.

Was a ton of fun to load and learn something new. Now I have a problem. Not gonna have much free time….
 
Just started reloading for first time today. My kid learned last summer and got most of the tools needed. I bought the benches and components. Reloaded my first rounds today. Case prepped some once shot brass and ran them all the way thru on a pet load my kid has worked up.

Was a ton of fun to load and learn something new. Now I have a problem. Not gonna have much free time….
It only gets worse I’m afraid my dude.
 
I need a replacement for Reloder 26 and 162 ELDX for our 7mm Rem Mags. I haven’t heard about StaBall HD for that application.
I’m going to try Ramshot Grand after good results in a 270wsm. Once I get bored with this 6.5PRC barrel I will spin a fresh 2025 tikka 7rem mag barrel on and sling some 162’s
 
Loaded up some 6 ARC with Lever and 70 gr Nosler BTs for my gas gun. The 87 VMax go about 2850, so I think I should be close to 3k or better.

Also working up some 38 special for my Marlin lever action. Just need to shoot them over a chrono to see what ends up being subsonic out of my 16” barrel. Once I have that figured out, I’ll do some bulk loading.
 
Back
Top