What did you do in the reloading room today?

Loaded up 100 rounds of my go-to 260 Rem loads. Starline brass, CCI 200, 42.0 gr IMR 4350 with a 140 ELD-M seated at 2.825". Gets me 2690 fps out of a 21" barrel. Looking forward to see what they do on pronghorn in a couple weeks.
 

Attachments

  • 20250907_210052.jpg
    20250907_210052.jpg
    208.1 KB · Views: 14
Loaded up a ladder for my 7 SAUM
N560 & Berger 168s

Also broke the casting on my RCBS benchtop primer. Fairly new too, less than 500 cases primed with it.
3d69e3c1e4d5f683c2c512821815646a.jpg


Sent from my SM-S908U using Tapatalk
 
Loaded a batch of 50 7x57 - Norma brass, 45.5 grains of N555, 175 Hornady ELD-X, 3.235 OAL (yes, my rifle has a deeep throat, why do you ask?), CCI BR2 primers, neck sized in a Lee Collet die. 35 out of 50 came out with +/- .001 runout, the other 15 came out with approx .003-.005 runout (trash talk them Lee Collets all you want, nothing else I've ever used comes close in terms of runout). These are just 'stupid accurate' in my gun (tested again at the range today).

Also loaded a batch of 10 7mm-08, Norma 308 brass, 42 grains of Varget, 140 Sierra Tipped Game King/TGK/GameChanger, 2.8-ish OAL (I say "ish" because these 140 TGK's have a ton of variance - CBTO is +/- .003 or so, actual OAL varies by as much as .012), sized and seated with RCBS. Runout for 7 of them was under .005, the other 3 were over .010 (looked like bananas when I spun them in the runout gauge, LOL). Lee Collet die for 7mm-08 arrives today, we'll see if the next batch isn't closer to straight. Accuracy was only so-so at the range, but velocity was both good (2850) and near zero ES/SD.
 
I bought a bunch of Leverevolution for my 30-30... I realize it's going to be a while before I burn through a jug with my 30-30, so I loaded up some 25 gr, 73 eld-m in .223 and 44 gr, 180 sierra RN in my .308.

Excited to see how it goes. I've been reading that it's similar to CFE22. I reached out to Hodgson for load data and they said they have some agreement with Hornady they cannot publish load data for it unless the Leverevolution outperforms other options - something along those lines. Kind of frustrating, but I trust I'll figure out some loads that are good enough for practice.

Both of these are recipes others have mentioned online and we can always trust load data we find online - right ;)
 
Loaded up 50x (25 firsts, 25 seconds) 6.5CM 129gr ABLR w/ 41.0gr H4350.

Gonna run some hunting scenario shooting this weekend in-between scouting for muleys.

PXL_20250912_040953560.jpg
 
Loaded up some 338-06; 180 Accubonds, 58 grains of Varget.

Loaded up 5 x 7mm-08 with 160 Speer BT's and N160 just for testing later today.
 
Back
Top