UM/S2H/Suppressors/Scopes and More!

[SteveAndTheCrigBoys]

if you don’t get an immediate approval, you would have to drive back over on another occasion to pick it up.

I haven't needed to be in person to buy my last two cans. Just in person for pickup. So one trip after approval.

 

[Unknown Suppressors]

Is a dealer allowed to form 4 a can to a non-resident of the state the dealer is licensed? Probably something you need to verify. Otherwise form 3 to a dealer in your state would be needed.

At the moment we can only form 4 to Idaho residents. Shops can only form 4 to customers that reside in the state that their FFL/SOT is in. We want to work with a few shops in the states around us, but as of right now thats more of an idea than a plan. When you order the OG off the website there will be a spot to provide your dealers contact info. We will get it sent to them and you will do the form 4 process with them!

 

[pods8 (Rugged Stitching)]

I haven't needed to be in person to buy my last two cans. Just in person for pickup. So one trip after approval.

Yeah my local dealer runs off my silencer shop account, I only have to be in person for pickup.

 

[NSI]

At the moment we can only form 4 to Idaho residents. Shops can only form 4 to customers that reside in the state that their FFL/SOT is in. We want to work with a few shops in the states around us, but as of right now thats more of an idea than a plan. When you order the OG off the website there will be a spot to provide your dealers contact info. We will get it sent to them and you will do the form 4 process with them!

Highly suggest working with Wyoming Gunfighter to service western wyoming. Happy to make the connection, I know the ownership there would be enthusiastic.

-J

 

[nm.otter]

the PewScience website looks the way it does with tons of excess information.

The ability to distill down lots of complicated information into brief consumable segments is not his/its strong suit.

It's not just them.

 

[Bluumoon]

Highly suggest working with Wyoming Gunfighter to service western wyoming. Happy to make the connection, I know the ownership there would be enthusiastic.

-J

I think this is associated with my local FFL CO Gunfighter, that'd be handy for me.

 

[NSI]

I think this is associated with my local FFL CO Gunfighter, that'd be handy for me.

Correct.

-J

 

[4th_point]

I am the owner, I am a mechanical engineer. The information we are gathering from the destructive testing is far more relevant than any information that can be gathered from any FEA or CFD model. That goes for sound suppression and strength. If anyone chooses to not buy our suppressors because they don't believe the sound or destructive testing is done to their liking, that is ok.

Good luck with your business. I truly mean that.

If get access to one of your cans locally, I'll make a point to test it and send you the data.

 

[HuntHarder]

Good luck with your business. I truly mean that.

If get access to one of your cans locally, I'll make a point to test it and send you the data.

Feel free to post your #'s here too. Some might find value in them.

 

[Plague]

At the moment we can only form 4 to Idaho residents. Shops can only form 4 to customers that reside in the state that their FFL/SOT is in. We want to work with a few shops in the states around us, but as of right now thats more of an idea than a plan. When you order the OG off the website there will be a spot to provide your dealers contact info. We will get it sent to them and you will do the form 4 process with them!

Please consider contacting Scott at On Target Outdoors. They are my LGS here in western Washington. They also have a location in Montana.

 

[andrew_hood27]

Since the OG is intended/optimized/designed for 6.5cal and smaller….why make the bore .30cal and not 6.5cal?

 

[Brontosaurus]

Since the OG is intended/optimized/designed for 6.5cal and smaller….why make the bore .30cal and not 6.5cal?

Cause form is a fiend for 308s

 

[walk2112]

Since the OG is intended/optimized/designed for 6.5cal and smaller….why make the bore .30cal and not 6.5cal?

That and pure versatility/diversifying the market reach I suspect. Would be cool to see a 6.5 or 6mm version though to even further optimize it for the creeds, ARCs, 223, etc.
Maybe the bore size doesn’t make a big difference until you get to 22 or 6mm though.

 

[AKarchery]

I’m sorry if it’s been asked and I missed it. With the pickle being an OTB, will it fit a 16.25” barrel in a Rokstock?


Sent from my iPhone using Tapatalk

 

[Ryan Avery]

I’m sorry if it’s been asked and I missed it. With the pickle being an OTB, will it fit a 16.25” barrel in a Rokstock?


Sent from my iPhone using Tapatalk

yes

 

[bergie]

I’m just waiting for the day that unknown can design a bow that weighs 3.5 lbs, can be dry fired in your living room without exploding, draws like a toy, the back wall like Thor’s hammer, and can shoot a 450 gr arrow at 300fps regardless of draw length. Is that too much to ask? I might have missed some desired characteristics.

Lets add tool-less tunability and I can't believe I am typing this on this particular thread but make it whisper quiet. Oh and make it the most dead-in-the-hand bow ever. Even more than the Mathews Lift X, which is more dead-in-the-hand than the Lift which is more dead-in-the-hand than the Phase 4 which is more...

 

[Speaks]

Heard mention of a smaller pack to go along with the giant one coming a bit later. Had been toying with getting on of the small exo bags for scouting and day hunts. Any one know any more about this?

 

[Mark at EXO]

Heard mention of a smaller pack to go along with the giant one coming a bit later. Had been toying with getting on of the small exo bags for scouting and day hunts. Any one know any more about this?

Only one S2H bag size in the works. If you want something smaller that works with our frame, it’d be one of our K4 bags.

 

[MuleyFever]

The plan right now is FDE, Black, OD green and Raw. We might eventually add an option to pick from a bunch of different C series colors. In the beginning for different colors or patterns we will have to coordinate with UM.

Any chance you have pics of the actual suppressors in the colors you have on the website?

 

[mxgsfmdpx]

@Unknown Suppressors sorry if it’s been answered. Will all suppressors come with a supplied 5/8 to 1/2 adapter?