Trigger Job or Aftermarket Trigger?

Joined
Jun 9, 2022
Messages
95
Timney gets my vote...I never understood the difference a good trigger can make until I replaced the trigger the trigger on an old Ruger m77 I've had for years. I've got 3 and will eventually replace them all as the budget allows. The only exception is my little CZ 204 with the set trigger, it's the only factory trigger that I can't see getting any better.
 
Joined
Nov 12, 2020
Messages
1,230
Timney gets my vote...I never understood the difference a good trigger can make until I replaced the trigger the trigger on an old Ruger m77 I've had for years. I've got 3 and will eventually replace them all as the budget allows. The only exception is my little CZ 204 with the set trigger, it's the only factory trigger that I can't see getting any better.
Tang safety m77? What did you go with? I’ve tried a rifle basix sear and I was either at a pound or it couldn’t get out of the way and would not fire.
 
Joined
Jan 14, 2019
Messages
470
Location
Montana
That does make sense, and is what makes me think twice...

But I don't really have any complaints about my current trigger. I know it's not the best there is, but it's fairly light, smooth, and not gritty or sloppy.

So, is it really night and day with one that the user thinks is more than acceptable?



I modify all sorts of things, I definitely see the value of aftermarket parts. It's the dollar value of replacing one that I think is fine, vs just tweaking it.

It is not night and day over factory Remington, but any decent trigger from a reputable brand will be a noticeable improvement. less creep, cleaner break, less over travel. It may not make your groups tighter, but for me it just makes the rifle feel nicer.

I tinker with everything I own as well, though when it comes to 700 triggers, I just get a $150 Timney, adjust to my liking, and be done. Even if a smith could tweak your factory trigger for that cost, why risk the unknown when there are so many readily available, quality, proven options?
 
Last edited:
OP
displacedtexan
Joined
Feb 12, 2022
Messages
1,818
It is not night and day over factory Remington, but any decent trigger from a reputable brand will be a noticeable improvement. less creep, cleaner break, less over travel. It may not make your groups tighter, but for me it just makes the rifle feel nicer.

I tinker with everything I own as well, though when it comes to 700 triggers, I just get a $150 Timney, adjust to my liking, and be done. Even if a smith could tweak your factory trigger for that cost, why risk the unknown when there are so many readily available, quality, proven options?
Because he charges $60, and is gonna have the rifle anyway.

The cost difference will feed that rifle for a few years.
 

hereinaz

WKR
Rokslide Sponsor
Joined
Dec 21, 2016
Messages
3,021
Location
Arizona
Because he charges $60, and is gonna have the rifle anyway.

The cost difference will feed that rifle for a few years.
$100 bucks more for a sweet trigger--for the lifetime of a rifle isn't much compared with the other costs of hunting.

You might be asking the wrong crowd, there are a lot of people who would keep their factory trigger. Not very many people who like to shoot and hunt enough to get on the internet is the wrong group of people.
 
OP
displacedtexan
Joined
Feb 12, 2022
Messages
1,818
You'll spend the $60 now and end up spending the $150-$200 on a new trigger later.
I told my wife earlier that if you don't have the time or money to do it right the first time, you better have it the second time.



So I ignored all the "aftermarket because the stock one is junk" comments, and am still about to order a trigger.
 

2Tundras

FNG
Joined
Jun 14, 2022
Messages
16
Had a trigger put in a new Mark V in 270m. Turns out its me. I am the problem. Not the trigger. Yuuuuuuup.
 

hereinaz

WKR
Rokslide Sponsor
Joined
Dec 21, 2016
Messages
3,021
Location
Arizona
Had a trigger put in a new Mark V in 270m. Turns out its me. I am the problem. Not the trigger. Yuuuuuuup.
But did you know it before you went from bad trigger to better trigger? I went through much the same thing, got all awesome gear and realized I just sucked. I gotta say having good gear made me want to practice more than when I had crappy gear.
 
OP
displacedtexan
Joined
Feb 12, 2022
Messages
1,818
If $40 - $100 is going to feed a rifle for a few years, then you're overthinking it. I wouldn't be putting any money in a rifle that basically never gets used. In fact, you'd be better off just getting rid of the entire rifle and put the money towards rifles that regularly get used.
That's a solid point... But there's no rifles I'd use more.

I'm very prone to going west to be camp cook and such. I tend to sell rifles fast because they don't get used... I got this one cheap because a buddy felt like he owed me.

So for the rifle, a decent scope, some ceracokote, trigger work and a stock and still I'm in for fewer dollars than the average 700, but something custom enough to hang on to.
 

thinhorn_AK

"DADDY"
Joined
Jul 2, 2016
Messages
10,592
Location
Alaska
I have trigger techs and timney in my rifles. I really like both but it sort of depends on what gun I’m using. The timney in my m70 is great, the trigger tech in my Remington 700 is also awesome. I even put trigger techs into my kimbers.
 
Joined
Apr 8, 2019
Messages
1,824
All my 700s have Timneys. They are all 90s models with the questionable trigger so they all needed replaced anyways.
 

2Tundras

FNG
Joined
Jun 14, 2022
Messages
16
But did you know it before you went from bad trigger to better trigger? I went through much the same thing, got all awesome gear and realized I just sucked. I gotta say having good gear made me want to practice more than when I had crappy gear.
It was bouncing around in back of my head. Weath 270m that has a bite I dont care for. Now I know I just need to work on it.
 

Rich M

WKR
Joined
Jun 14, 2017
Messages
5,300
Location
Orlando
Lots to be said about being in ehape and knowing how to shoot.

I’m short fat slow fat but was taught how to shoot and can shoot 1 inch at 250 with 3 of my rifles. Did a 1.3 shot dismeter hole at 225 w ruger precision some guy at range had. Basically 1 hole. Killer rifle tho.

Will trigger job help? Not if any part of your form is off.

Work on form then consider new trigger.

Not being an ass. Some stuff comes first.
 

Dsconant

FNG
Joined
Jan 29, 2023
Messages
5
What is everyone’s preferred poundage on a hunting trigger? I dug my ole 700 out of the safe and doing some tune ups to get it ready to elk hunt. I’m leaning towards a Triggertech at this point.


Sent from my iPhone using Tapatalk
 

Unckebob

WKR
Joined
Aug 21, 2022
Messages
954
It is not night and day over factory Remington, but any decent trigger from a reputable brand will be a noticeable improvement. less creep, cleaner break, less over travel. It may not make your groups tighter, but for me it just makes the rifle feel nicer.

I tinker with everything I own as well, though when it comes to 700 triggers, I just get a $150 Timney, adjust to my liking, and be done. Even if a smith could tweak your factory trigger for that cost, why risk the unknown when there are so many readily available, quality, proven options?

This. I built I dropped a TT Primary trigger in a gun that will almost exclusively for hunting and will be a box of ammo per year gun. It feels good and was able to install it myself.

Including tax and shipping, I think I paid $160 for it. It was designed and built to work properly at 2.5lbs - 5lbs. In contrast, a massaged X-Mark was not.
 
Top