Tikka Barrel Removal and Install Tool Swap Thread

[Eluder]

I was in a time crunch, so I ordered my own kit. I am happy to add it to the pool with the same rules as gtriple. I am in NW Montana.

Wheeler Action Wrench #1 - $80
Viper Barrel Vise - $90
OMR Tikka Internal Action Wrench - $97
Torque Wrench (10-100 ft-lb) w/ bit - $55
Leather chunks - $12

 

[letrbuck]

Anyone willing to loan out a set of creedmoor headspace gauges?

 

[Jimbee]

Anyone willing to loan out a set of creedmoor headspace gauges?

I have a go guage you are welcome to use.
I won't be home for another week.

 

[pjohnson8168]

I would like to get in line for those creedmoor gauges, will need them Thanksgiving week.

 

[Jimbee]

I would like to get in line for those creedmoor gauges, will need them Thanksgiving week.

Maybe coordinate with letrbuck? I will try to get it sent out monday.

 

[Eluder]

My set is out.

 

[shedfinder7]

following

 

[Eluder]

got mine back

 

[letrbuck]

I am in the Greenville/Spartanburg area of SC and have the following:

Wheeler #1 wrench
Viper barrel vise
Bugholes Tikka internal action wrench
Bugholes Remington 700 internal action wrench
Snap Torque Wrench (up to 120 ft/lbs) with sockets for action wrenches and adapters for barrel nuts
Savage Barrel nut wrench
308 family go and no-go gauge
30-06 family go gauge
Belted Mag go gauge

I travel quite a bit for work, but if anyone in the area wants to do a barrel swap on a Tikka, Remington, or Savage, we can probably work something out for you to come over and use what I have.

Would you be willing to lend out your 30-06 gauge?

 

[HandgunHTR]

Would you be willing to lend out your 30-06 gauge?

Sure. Shoot me a PM.

 

[throughhiker]

following

 

[bpitcher]

Anyone had issues with the Wheeler wrench? Just wondering.

The screws keep pulling out of mine when tightened. Wheeler is sending another.

 

[diverc18]

Anyone had issues with the Wheeler wrench? Just wondering.

The screws keep pulling out of mine when tightened. Wheeler is sending another.

Happened to me. Ended up going to ace and getting longer bolts

 

[bpitcher]

Happened to me. Ended up going to ace and getting longer bolts

1/2" longer bolt did the trick. Thanks!