The Rokslide 95 (Ruger American 😁)

[huntsman22]

had to bust on ya a little, sixpack. nice trio.

 

[Sixpack]

Appreciate it! All good!

Your ARC is messing with me everytime I see it! The trio might grow by 1……

 

[MarkOrtiz]

Has anyone used JB weld or anything to stiffen the original stock? Seems easy, but wondering if there are any tips.

I want to stay with the original stock because the LOP is so easily adjusted and this is my kids' rifle. 22 ARC

I am about to add an SRS mini arca and I also ordered the weight kit for the butt end.

I used carbon arrow shafts and epoxy to stiffen the stock up on ours.

 

[Deere_Man]

Duramag has 6.5 Grendel-6 ARC-22 ARC flush fit mags back in stock, along with the 350L mags.

Ruger American AR Pattern Flush-Fit Mags

Duramag SS Flush fit magazine for the Ruger American ranch and predator rifles in 350Legend, 5.56, 400 Legend, 6.5 Grendel, 6mm ARC, 22 ARC

dura-mag.com

 

[BLJ]

Ruger®

ruger.com

Cold hammer forged bull barrel.

This may be the death of the CTR.

 

[Sixpack]

I saw that too! I grabbed two 6.5grendel/6arc mags to try in my 7.62x39. I will report back on how it works!

 

[BigEd36]

Ruger®

ruger.com

Cold hammer forged bull barrel.

This may be the death of the CTR.

And they sure are pretty;

 

[Stache Attack]

If anyone has a pmag stock for a predator or ranch I would pick up. Like to get out of my rotary mag without going to a chassis

 

[Luke S]

You don't need a pmag stock. Get a 450 Bushmaster mag and it will work with 308 based cartridges and fit in the rotary mag stock.

 

[Stache Attack]

You don't need a pmag stock. Get a 450 Bushmaster mag and it will work with 308 based cartridges and fit in the rotary mag stock.

Looking for 5.56/223

 

[huntsman22]

You can buy the bottom plastic direct from Ruger.

 

[Deere_Man]

If anyone has a pmag stock for a predator or ranch I would pick up. Like to get out of my rotary mag without going to a chassis

I believe that in order for ar15 magazines to work on the Ruger American, it also needs to have a cutout scalloped spot machined off of the bolt. The first 223/5.56 Ruger American models didn’t have it.

 

[Deere_Man]

Do you have a link for the video? Thanks.

I can’t find the video anywhere! But I did find a Ruger Forum thread regarding the subject:

https://www.rugerforum.net/threads/diy-short-ar-style-magazines-for-ruger-american-rifles.393163/

 

[BLJ]

I’ll check that out. Thanks.

 

[Stache Attack]

You can buy the bottom plastic direct from Ruger.

Only on the ones that are newer. Older models didn’t come with the cut out around the action screws

 

[douglasfir]

Ruger is rebranding the gen 1 Americans as the "Glenfield Model A." It has the 3-position safety of the gen 2's, but it doesn't have cerakote and it uses the old stock. All the models come with threaded 20" barrels. Looks like a great choice for Ruger American fans who don't like spiral fluting (me). I just wish they had it in 6 ARC.