The Rokslide 95 (Ruger American 😁)

[mcfd45]

RA 30.06 did a hydro dip in KUIU verde. The shop does 4 layers of polyurethane afterwards. It stiffened the stock up quite a bit.

Topped with an sig whiskey 4 2.5-10 with the illuminated dot in the crosshairs. Helped with a bear hunt (not black on a black background)

Pay no attention to all the crap on the table.

 

[Pilsner]

I ended up putting my Ranch 223 back into the OEM stock. I had an outlier chassis/rail ordered and paid for, but after two weeks I never heard anything about a shipping notice. I contacted them and still didn’t hear anything. After three weeks I canceled my ordered and they responded within hours. It’s only slightly aggravating but it is what it is.

If anyone is interested in a KRG bravo for their ranch rifle, let me know and we can make a deal.

still have the krg?

 

[justinspicher]

I don’t. I sold it and the Ruger.

 

[khuber84]

Anyone have a gen2 in 6arc? How does it shoot? I'd like a 6arc for training purposes, but really don't want to drop $2k on a Tikka build. Could drop an American into a mdt timbr chassis and be done at or near a $G

 

[Wacko]

Anyone have a gen2 in 6arc? How does it shoot? I'd like a 6arc for training purposes, but really don't want to drop $2k on a Tikka build. Could drop an American into a mdt timbr chassis and be done at or near a $G

You could do a howa 6 arc barreled action from brownells...stock of choice...etc. You'd be around the 1G mark that way too...just for consideration...

Not trying to derail this awesome thread...

 

[khuber84]

You could do a howa 6 arc barreled action from brownells...stock of choice...etc. You'd be around the 1G mark that way too...just for consideration...

Not trying to derail this awesome thread...

I should just tear down one my zermatt origins and throw an arc barrel on that truthfully.


Back to the RUGER TALK! MY BAD!

 

[Loper]

View attachment 942219
RA 30.06 did a hydro dip in KUIU verde. The shop does 4 layers of polyurethane afterwards. It stiffened the stock up quite a bit.

Topped with an sig whiskey 4 2.5-10 with the illuminated dot in the crosshairs. Helped with a bear hunt (not black on a black background)

Pay no attention to all the crap on the table.

I’m usually not a fan of dipped stocks but this looks great. Good to know it stiffened the stock too.

I didn’t take notice of all the stuff on the table, but once you mentioned it I went back and looked at it all…haha.

 

[mcfd45]

I’m usually not a fan of dipped stocks but this looks great. Good to know it stiffened the stock too.

I didn’t take notice of all the stuff on the table, but once you mentioned it I went back and looked at it all…haha.

Thanks brother. I appreciate it. Yea. The stock did stiffen up. I am thinking of dropping a Timney trigger in it. Right now it is all stock… except the stock

 

[grfox92]

For those of you you with Gen1 .223s, how does the barrel handle heat? Awful good deal on a few used Gen1 .223s at my local Scheels.

Sent from my SM-G990U using Tapatalk

 

[BLJ]

For those of you you with Gen1 .223s, how does the barrel handle heat? Awful good deal on a few used Gen1 .223s at my local Scheels.

Sent from my SM-G990U using Tapatalk

I’ve done a full 30 round mag through mine as fast as I could work the bolt with no issues.
55 grain AE into about a 3” group.

I’ll see if I can find a picture of the group this evening.

 

[Deere_Man]

For those of you you with Gen1 .223s, how does the barrel handle heat? Awful good deal on a few used Gen1 .223s at my local Scheels.

Sent from my SM-G990U using Tapatalk

Mine works good when hot and cold. I usually only shoot it 20-30 times per session.

 

[Undrgrndprdcts]

For those that don't know, Magpul started shipping their Hunter Lite stock/chassis for the R700. They are saying the RA one is dropping soon. It's up on their website just not showing in stock yet. 2.4 lbs and 220 bucks. Slim and light, mlok for arca on the bottom, and built in aics mag setup. Should be the answer a lot of people have been looking for.

 

[Xnoheros]

For those of you you with Gen1 .223s, how does the barrel handle heat? Awful good deal on a few used Gen1 .223s at my local Scheels.

Sent from my SM-G990U using Tapatalk

Mine has seen a lot of rounds and holds up well. It’s a pretty heavy barrel, and I can keep 10 round groups around 1.2 moa without any real pauses.

For those that don't know, Magpul started shipping their Hunter Lite stock/chassis for the R700. They are saying the RA one is dropping soon. It's up on their website just not showing in stock yet. 2.4 lbs and 220 bucks. Slim and light, mlok for arca on the bottom, and built in aics mag setup. Should be the answer a lot of people have been looking for.

That’s great news, thanks for the heads up

 

[Sixpack]

I have a gen 1 7.62x39 that is probably around 1500 rounds and I have been mean to it. Hot or cold it keeps chugging along. My gen 2 5.56 appears to be the same as well.

 

[Sixpack]

I also sent Bell and Carlson an email about info in their stock with an AR mag bottom metal. It sounds promising that they will possibly make one in the near future, but who knows. I have all but given up on a Stockys…

 

[BLJ]

I also sent Bell and Carlson an email about info in their stock with an AR mag bottom metal. It sounds promising that they will possibly make one in the near future, but who knows. I have all but given up on a Stockys…

Sounds promising about the B&C. More options for the AR mags would be great.

And I have given up on Stockys. Sadly.

 

[The Guide]

Good thing about B&C is that they have a AICS bottle metal for their Ruger American stocks. Any cartridge that will work in an AICS mag has an option. Unfortunately I don't think there is an AICS mag for the ARC/Grendel cases.

Jay

 

[Deere_Man]

Good thing about B&C is that they have a AICS bottle metal for their Ruger American stocks. Any cartridge that will work in an AICS mag has an option. Unfortunately I don't think there is an AICS mag for the ARC/Grendel cases.

Jay

I thought there was some from MDT

https://mdttac.com/us/6mm-arc-mdt-metal-magazine-12-rnd

https://mdttac.com/us/6mm-arc-mdt-polymer-aics-magazine-10-rnd

 

[Steve300xcw]

Unfortunately I don't think there is an AICS mag for the ARC/Grendel cases.

Jay

 

[BLJ]

Good thing about B&C is that they have a AICS bottle metal for their Ruger American stocks. Any cartridge that will work in an AICS mag has an option. Unfortunately I don't think there is an AICS mag for the ARC/Grendel cases.

Jay

Probably sounds odd but I actually prefer the AR mags for the ARCs.