Stocky’s Hunter VG Tikka stock

[Stockys]

Can I still call and get that price for a carbon stock for a tikka ?

Yep! Just call and talk to Kim.

 

[Buckhead]

Thought the Stocky's carbon was a little lighter than that.

 

[Twistedtrucker1]

I’ve been working on my stock by adding epoxy putty to increase grip/reduce length to trigger. I’m at 1.75ish depending on where you measure. I used this putty that ACE hardware sells. It’s fantastic. But you have to work fast as it’s hard as a rock in about 3-4 minutes. However you can rasp/file/sand in about 20 minutes. I then put a coat of Marine Tex over it. View attachment 699526View attachment 699528View attachment 699528

What did you do to get that texture thanks

 

[Tanner]

We’re trying to get as much inventory out before the hurricane hits on Wednesday so here’s some specials we’re running.
In stock Carbon blank barrels $599
In stock Carbon pre fit barrels $749
In stock steel barrels $300

Any carbon stock in stock $350 (you will have to call to place the order to get that pricing)


Call if you want something you don’t see listed in stock. We will go through the shelves and see if we can find it.

Is there any chance at still getting this deal on a carbon Tikka VG?

 

[zpearo]

Is there any chance at still getting this deal on a carbon Tikka VG?

Call stocky's tomorrow and ask. They gave me the deal a week ago.

 

[Tanner]

Call stocky's tomorrow and ask. They gave me the deal a week ago.

Gracias !

 

[awpk03s]

What’s the best way to add some grip on these without adding mass/circumference?

Can you stipple (either heat iron or a dremel bit) the carbon? I assume that’s a no no…. Is the only option a marine Tex coating type?

I have already sponge painted and clear coated the stock, that helped a little but it’s still slick.

 

[Dobermann]

What’s the best way to add some grip on these without adding mass/circumference?

Can you stipple (either heat iron or a dremel bit) the carbon? I assume that’s a no no…. Is the only option a marine Tex coating type?

I have already sponge painted and clear coated the stock, that helped a little but it’s still slick.

I used a 'Granite effect' spray paint, then overcoated with regular spray paint, then three coats of matt clear coat. Have a look through my posts to see if you can find it - if not, let me know and I'll track it down. Post shows texture and steps of process.

 

[Bc45]

Got one for sale if anyone is interested

 

[Kimber7man]

High desert bottom metals is the answer.

Looking at these now. What is the difference between the standard and the linear models?

 

[NSI]

Looking at these now. What is the difference between the standard and the linear models?

trigger guard size

-J

 

[swavescatter]

Looking at these now. What is the difference between the standard and the linear models?

Just the trigger guard shape as described. Make sure to grab an extra shim pack while you’re at it. Handy for other stocks as well.

 

[mattminative]

Got one for sale if anyone is interested

Still for sale? Which paint scheme is it?

 

[mattminative]

We’re trying to get as much inventory out before the hurricane hits on Wednesday so here’s some specials we’re running.
In stock Carbon blank barrels $599
In stock Carbon pre fit barrels $749
In stock steel barrels $300

Any carbon stock in stock $350 (you will have to call to place the order to get that pricing)


Call if you want something you don’t see listed in stock. We will go through the shelves and see if we can find it.

Still selling the stocks for $350 if we call in?

 

[Stockys]

Still selling the stocks for $350 if we call in?

Yes

 

[gulfofmexicoflyfishing]

Final updated form aside from the magpul bipod that I stole from one of my 22’s.

Between moving to the stocky’s VG and chopping down to 16.5”/spiral fluting I successfully took it from 11.5lbs down to 9.6lbs minus the bipod. Very happy with it overall!

 

[Tanner]

Final updated form aside from the magpul bipod that I stole from one of my 22’s.

Between moving to the stocky’s VG and chopping down to 16.5”/spiral fluting I successfully took it from 11.5lbs down to 9.6lbs minus the bipod. Very happy with it overall!

View attachment 808391

That looks sweet, did you do some adding to the grip area ?

 

[gulfofmexicoflyfishing]

That looks sweet, did you do some adding to the grip area ?

Thanks! Built it forward with starbrite marine epoxy putty and covered that with black gorilla epoxy. Textured that as it cured with a popsicle stick.

 

[kswaterfowl]

Final updated form aside from the magpul bipod that I stole from one of my 22’s.

Between moving to the stocky’s VG and chopping down to 16.5”/spiral fluting I successfully took it from 11.5lbs down to 9.6lbs minus the bipod. Very happy with it overall!

View attachment 808391

Looks great! And the bolt is on the correct side as well.