SIG p226 alternatives

Joined
Nov 29, 2023
I have a p220 I love that’s been about shot to death, keep it under the front seat. Never looking for opportunities to use it but definitely have had reasons over the years to reach for it. Thinking lately of moving to something 9mm for higher capacity. I got my 220 years ago used, so the thought of new 226 prices is a little out of reach. Is there anything else I should look at? I love the exposed hammer DA/SA no safety format…. I’ve never been comfortable with a striker fired pistol with one in the tube ready to go but with the Sig I don’t worry about it.

Just looking for options before either looking for a used 226 or buying a Glock 17 or 19.

Thanks.
 
Oh man, with your love of your P220 and trust in them, you gotta consider the P365 AXG Legion. Best shooting handgun I’ve ever shot. Metal frame, so a bit of weight to it, while still being compact and holding 17 rds. of 9mm.

IMG_7627.jpeg
 
OP, if you're seriously dialed in with that P220, best practice would be to stay with the same basic format - and as you've discovered, a used P200-series Sig will just about last forever. There are tons used on Gunbroker that, even at 500 or 1000 rounds, aren't even really broken in yet.

Full-size, 226s are great. If you want a little more concealable, a 229 in 9mm is a forever-gun, given how stout they were built originally, to handle the .40S&W. One of the best EDC 9mms ever made is the P228, which is a bit slimmer and lighter than the 229. Speaking from a lot of experience on all these here.

As was mentioned above, if you do want to try something new, the P365 AXG Legion is simply one of the best EDC guns Sig has ever produced. Not too big, not too small, not too light, not to heavy, they point extremely well for most people, and shoot fantastic.

If you follow-up your interest on a Glock, be sure to actually shoot one first. With the trigger alone, going from a 220 to any Glock is like going from driving a BMW 7-series to driving a 6-cylinder 4Runner. Nothing wrong with 4Runners at all, but it's an entirely different experience, and you'll want to experience that before purchasing.
 
OP, if you're seriously dialed in with that P220, best practice would be to stay with the same basic format - and as you've discovered, a used P200-series Sig will just about last forever. There are tons used on Gunbroker that, even at 500 or 1000 rounds, aren't even really broken in yet.

Full-size, 226s are great. If you want a little more concealable, a 229 in 9mm is a forever-gun, given how stout they were built originally, to handle the .40S&W. One of the best EDC 9mms ever made is the P228, which is a bit slimmer and lighter than the 229. Speaking from a lot of experience on all these here.

As was mentioned above, if you do want to try something new, the P365 AXG Legion is simply one of the best EDC guns Sig has ever produced. Not too big, not too small, not too light, not to heavy, they point extremely well for most people, and shoot fantastic.

If you follow-up your interest on a Glock, be sure to actually shoot one first. With the trigger alone, going from a 220 to any Glock is like going from driving a BMW 7-series to driving a 6-cylinder 4Runner. Nothing wrong with 4Runners at all, but it's an entirely different experience, and you'll want to experience that before purchasing.
I really appreciate the reply. And I can appreciate the analogy between a BMW 7 series and 4 runner.

The 2 guns I carry in my truck daily are my sig 220 and a little Glock 42. I shoot both at the range some, maybe 2-3 times a month. About 100 rds through each each trip. Very different triggers but they are familiar to me at this point.

To remain consistent, my best bet may be to keep looking for a clean second hand p226.
 
Sig 2022, Beretta PX4 and CZ P07/P09c are the very few less expensive SA/DA guns out there today.
These are some of the less expensive options that came to my mind as well. I have the polymer P07 and love it. I wouldn't mind getting an aluminum or steel framed cz75 variant as wel.
 
Back
Top