Show your Tikka ten round groups

Jimbee

WKR
Joined
Mar 16, 2020
Messages
887
image_cropper_1714768587472.jpg
Tikka .243 superlite barrel cut to 17", Raptor8. Lapua brass 108 eldm 44grains of StaBall6.5. Had a slight ejector mark on one of the last shots. Waiting on my chronograph to check velocity. How much should a person back down powder charge with a slight ejector mark? 75 degrees F and sunny. Everything was warm.
 

ljalberta

WKR
Joined
Dec 7, 2015
Messages
1,485
View attachment 707185
Tikka .243 superlite barrel cut to 17", Raptor8. Lapua brass 108 eldm 44grains of StaBall6.5. Had a slight ejector mark on one of the last shots. Waiting on my chronograph to check velocity. How much should a person back down powder charge with a slight ejector mark? 75 degrees F and sunny. Everything was warm.

I personally back down at least half a grain on a warm day and a least a full grain if I have an ejector mark on a cold day.

Not sure your load reference or how deep you’re seating the bullets, but Hodgdon has max at 43.1gr and using Winchester cases, which I believe have more room than Lapua (don’t quote me on this).

Sure shoots good groups though.
 

Jimbee

WKR
Joined
Mar 16, 2020
Messages
887
I personally back down at least half a grain on a warm day and a least a full grain if I have an ejector mark on a cold day.

Not sure your load reference or how deep you’re seating the bullets, but Hodgdon has max at 43.1gr and using Winchester cases, which I believe have more room than Lapua (don’t quote me on this).

Sure shoots good groups though.
Yeah, I went off Hodgdon website and loaded 5. One each at 40,41,42,43,44 grains at around .025 off the lands. I'll back down a grain and shoot some more. I shot a 28 round group with 7828ssc that was 2.2"
 
Joined
Aug 2, 2023
Messages
18
Location
Florida
Did a little data collection on my first batch of 147 eldm hand loads today. Rifle was still zeroed for the factory 143 eldx loads I was shooting previously.

That is a 30rd group from my factory 20” CTR. Ballistic x only allows me to record 10 shots but I measured the group at 1.3175moa with calipers. Either way this thing certainly feels like the easy button!

0216726A-59AF-4C76-9E8A-9428B74FF149.jpegE3AA9D36-B0D4-4A2F-916F-8A17A5990E3F.jpeg
 

walk2112

Lil-Rokslider
Joined
Oct 22, 2020
Messages
158
View attachment 704405View attachment 704406View attachment 704404
Oh yeah! Just arrived tonight. Kudos to Form, UM, and Stockys. Was one of the first people to pre-order and really appreciate the 2-day shipping to AK! Got a call just on Monday from the coatings team to confirm details of cerakote, so that’s pretty speedy work! The “inverted color/gray scale Finnish M05 winter camo” idea I pulled out of my ass turned out pretty cool too. Best feeling grip and texture of any stock I’ve felt, ergonomics are natural to shoulder off hand after a few presentations, and immediately so in prone/sitting/tripod supported. The fore-end stiffness is excellent even with dead-cat inlet contour… I could go on but I am really digging it… enough that I already assume I’ll very likely be putting my Model 70’s custom Bansner stock up for sale this year once that all comes together. Excellent stock!
This rifle/setup, managed to shoot this 10 rnd group today at 100 yards with factory Sierra 130 gr TGK. Just a stock 6.5 Creed superlite chopped/threaded at the end of the flutes and rokstok’d. Feels good!
Needs .1up/.1rt but the NX8 doesn’t deal in small bills.
image_cropper_121C31C2-8A62-4A61-9FF1-9A8D0F80452B-8726-0000156C829A6D6B.jpegIMG_5652.jpeg
 

PlumberED

WKR
Classified Approved
Joined
Jun 25, 2021
Messages
448
Location
Maryland
Brand new Tikka T3x, CTR, 308 w, 20” barrel, NF SHV 3-10X42 & TBAC Dominus CB. Bipod and rear bags. I grabbed a random hand load I had on the shelf for my Savage 308. 4 shots to get it centered, then fired one 5 shot group, shifted down a ¼ MOA, then fired another 5. The high shot is from me not letting the suppressor cool, I was getting a good bit of mirage. ⅞“ group.
 

Attachments

  • IMG_0907.jpeg
    IMG_0907.jpeg
    304.9 KB · Views: 19
Last edited:
Joined
Nov 30, 2023
Messages
43
Location
NE Kansas
Brand new Tikka 223 Lite. Barrel cut to 18 and threaded. 10x SWFA. First shots ever with scope, rifle and small rear bag prone off picnic table. First 10 shots under an inch, adjust scope, then 5 shots just under an inch, then adjust scope one click down and 15 in 1.5. with 25 year old powder-lol. A few fliers on the 15 shot group that were probably me, but still very happy. Still learning the rifle and new technique of thumb and index finger holding the rear and using other 3 fingers to squeeze the small bag for adjustment.
 

Attachments

  • PXL_20240519_135504906.jpg
    PXL_20240519_135504906.jpg
    213.7 KB · Views: 29
  • PXL_20240519_134140201.jpg
    PXL_20240519_134140201.jpg
    616.5 KB · Views: 29

TX_Diver

WKR
Joined
May 27, 2019
Messages
2,322
77TMKs with 2 powders

bKWgeMf.jpg
 

TX_Diver

WKR
Joined
May 27, 2019
Messages
2,322
15 rounds (8 on top 7 on bottom). These were loaded 2 years ago and then I started shooting 75 ELD-Ms. I seated these a little further today to 2.26 COAL and shot them just under 100 yards.

Shot the top group rushed as it was starting to rain.
Nz3lOHOh.jpg


I'd say all 15 fall within 1.2"-1.3" or so. And also conveniently have a pretty similar POI as the TMKs from my last test so I'll note the zero offset on the gun and play with both.

bKWgeMfh.jpg


I have a bunch of SMKs so I think I'm going to do some bulk loading of the SMK with 24gr of N140 , and then use up the sta-ball match with some TMKs
 
Top