RokStok

Update:
Ordered 9/9/25

"Order Placed with Stocky's" 10/30/25
"Shipped from Stocky's" 2/20/26
"Received from Stocky's 2/27/26

On my doorstep 3/12/26 (184 days)

Upon inspection, it seemed that the spacers were a little loose. As I went to remove a spacer, I discovered that the anchors were pulled out from the stock. Additionally, the spacers are stuck together. I was able to pry the butt pad off on one side but didn't go any further as to not damage anything.

Sent UM an email yesterday. I'm sure they'll take care of this, but it is pretty crappy wait past their advertised lead times and then receive something that is not usable.

5E7724F0-46A9-46B0-96D3-13045D7D3D29.jpeg

1B58AEA8-EA38-46D3-AEEA-D5F77E80F067.jpeg
 
Update:
Ordered 9/9/25

"Order Placed with Stocky's" 10/30/25
"Shipped from Stocky's" 2/20/26
"Received from Stocky's 2/27/26

On my doorstep 3/12/26 (184 days)

Upon inspection, it seemed that the spacers were a little loose. As I went to remove a spacer, I discovered that the anchors were pulled out from the stock. Additionally, the spacers are stuck together. I was able to pry the butt pad off on one side but didn't go any further as to not damage anything.

Sent UM an email yesterday. I'm sure they'll take care of this, but it is pretty crappy wait past their advertised lead times and then receive something that is not usable.

View attachment 1036931

View attachment 1036932
I’m getting close to asking them to cancel my order. Past 120 days, shipped from Stocky’s a week ago yesterday, and I figure it should have already arrived at UM. Hoping it didn’t have a defect and needed to be sent back.
 
Stockys reached out to me yesterday- mine should be shipping back to UM again. Curious to see how long it’ll take to get in hand. I’m skipping cerakote so they can just drill a few holes, attach a rail and send to me.
 
Update:
Ordered 9/9/25

"Order Placed with Stocky's" 10/30/25
"Shipped from Stocky's" 2/20/26
"Received from Stocky's 2/27/26

On my doorstep 3/12/26 (184 days)

Upon inspection, it seemed that the spacers were a little loose. As I went to remove a spacer, I discovered that the anchors were pulled out from the stock. Additionally, the spacers are stuck together. I was able to pry the butt pad off on one side but didn't go any further as to not damage anything.

Sent UM an email yesterday. I'm sure they'll take care of this, but it is pretty crappy wait past their advertised lead times and then receive something that is not usable.

View attachment 1036931

View attachment 1036932
Your spacers may not be stuck together. The have a nub and a recess that fit together so they don’t slide off on another. You can’t really unstick them until you unscrew the pad enough.
 
Your spacers may not be stuck together. The have a nub and a recess that fit together so they don’t slide off on another. You can’t really unstick them until you unscrew the pad enough.
I'm tracking that. My other RS has no issues with the spacers - once the screws are loose they move freely. I could probably pry them all apart with that little flat tip.

I'm mostly concerned by the whole thing pulling out of the stock though.
 
I'm tracking that. My other RS has no issues with the spacers - once the screws are loose they move freely. I could probably pry them all apart with that little flat tip.

I'm mostly concerned by the whole thing pulling out of the stock though.
The anchors in my Rokstock were also broken and I had to send back to be fixed.

The space system really isn’t great. I’m going with a longer pad in my RS Lite for that reason
 
Thanks everyone on the weight question, I guess I'll try calling UM on Monday, if nothing else to give them the feedback. If I find out anything interesting I'll post here.
 
This is all very discouraging. Im at 144 days and it’s back at Stockys due to issues. I’m not sure how comfortable I am keeping my order open at this point
 
Back
Top