RokStok

[WI-Carcosa]

Tikka T3 Rokstok no rail
Mil spec green single color cerakote
Spacers added 14.25” lop (will test and change as needed). 4mm Allen key is needed for changing out spacers.
Tikka T3 6.5 x55 Swede 19” barrel w tbac 7 and spartan tac bipod, maven rs 1.2

Stock weighed 33oz with spacers. UM labeled recoil lug. It was a very tight fit so I needed to flip the action side down on carpeted floor and give it a little English to seat in there and then it fit tight but perfect to put it all together. Can’t wait to shoot this thing.

9lb 8oz with suppressor but No mag or bipod. Should be right around 10lbs will everything.

 

[Runwilderness]

Tikka T3 Rokstok no rail
Mil spec green single color cerakote
Spacers added 14.25” lop (will test and change as needed). 4mm Allen key is needed for changing out spacers.
Tikka T3 6.5 x55 Swede 19” barrel w tbac 7 and spartan tac bipod, maven rs 1.2

Stock weighed 33oz with spacers. UM labeled recoil lug. It was a very tight fit so I needed to flip the action side down on carpeted floor and give it a little English to seat in there and then it fit tight but perfect to put it all together. Can’t wait to shoot this thing.

9lb 8oz with suppressor but No mag or bipod. Should be right around 10lbs will everything.

View attachment 781389
View attachment 781390

Very nice. Makes me wonder if I should have stayed with my original single color rather than change to a ripped pattern.

I’ll also be restocking a Swede and I’m considering cutting it for a suppressor. Can you comment on the load/MV you’re seeing from yours?

 

[WI-Carcosa]

Very nice. Makes me wonder if I should have stayed with my original single color rather than change to a ripped pattern.

I’ll also be restocking a Swede and I’m considering cutting it for a suppressor. Can you comment on the load/MV you’re seeing from yours?

Sure thing. Currently running a 135g DRT terminal shock with n560 that’s spicy at 2740. I will be trying n555 and h4350 soon to see if I can get 2700+ and how those do. This setup is going to kill a pile of stuff very soon

 

[Gadjet]

Tikka T3 Rokstok no rail
Mil spec green single color cerakote
Spacers added 14.25” lop (will test and change as needed). 4mm Allen key is needed for changing out spacers.
Tikka T3 6.5 x55 Swede 19” barrel w tbac 7 and spartan tac bipod, maven rs 1.2

Stock weighed 33oz with spacers. UM labeled recoil lug. It was a very tight fit so I needed to flip the action side down on carpeted floor and give it a little English to seat in there and then it fit tight but perfect to put it all together. Can’t wait to shoot this thing.

9lb 8oz with suppressor but No mag or bipod. Should be right around 10lbs will everything.

View attachment 781389
View attachment 781390

Great looking setup! Seems a tad on the heavy side.

 

[Bsnyder]

Wife’s stock showed up nice surprise before range day
*******

Well would have been a nice surprise but the surprise was the m5 bottom metal in let DOES NOT FIT Hawkins hunter bottom metal.

 

[camp run-a-muk]

UM knocked it out of the park. Just got both of my Rokstoks yesterday. Rem 700 long action arca/pic and a Tikka with arc rail.
Rifle is a (2023 build) 7prc with a Batt Mach. LA Igniter with a benchmark fluted barrel. Upgraded to a newUM bottle metal and magazine. Installed by UM and the action screws did need to be shorter. Also a shim on one screw. Important info for anyone with the same set up.
Cerekote was spot on with my other custom paint jobs of the past with UM.
UM made sure everything was good before I went home. I'm going to bed and final fit at home. I enjoy doing that work myself. Just a little sanding because it is a custom rifle and action.
Customer service was excellent. Be patient, it's definitely worth it. I have shot this stock in another gun and really like it. Prior stock was a XLR chassis.
I'm a very happy and glad I waited.
Definitely be buying another Rokstok in the future.

 

[Bsnyder]

Wife’s stock showed up nice surprise before range day
*******

Well would have been a nice surprise but the surprise was the m5 bottom metal in let DOES NOT FIT Hawkins hunter bottom metal.

Update…. 3 hours later 2 hardware stores but it is now I believe functional. Find out in the morning. Wife loves it. I need to do some more work on the inside of the stock to allow the hunter mag to release but for now it’s shootable

 

[ChrisAU]

Update…. 3 hours later 2 hardware stores but it is now I believe functional. Find out in the morning. Wife loves it. I need to do some more work on the inside of the stock to allow the hunter mag to release but for now it’s shootable

What did you have to modify?

 

[Bsnyder]

What did you have to modify?

You can see the pint paint pin mark I had to file down then had to trim an action down 3 threads. The action screw that is what it is. But using the file didn’t make me happy I called and left messages then said screw it we waited 10 months I’m going for it.