RokStok

[Runwilderness]

Tikka T3 Rokstok no rail
Mil spec green single color cerakote
Spacers added 14.25” lop (will test and change as needed). 4mm Allen key is needed for changing out spacers.
Tikka T3 6.5 x55 Swede 19” barrel w tbac 7 and spartan tac bipod, maven rs 1.2

Stock weighed 33oz with spacers. UM labeled recoil lug. It was a very tight fit so I needed to flip the action side down on carpeted floor and give it a little English to seat in there and then it fit tight but perfect to put it all together. Can’t wait to shoot this thing.

9lb 8oz with suppressor but No mag or bipod. Should be right around 10lbs will everything.

View attachment 781389
View attachment 781390

Very nice. Makes me wonder if I should have stayed with my original single color rather than change to a ripped pattern.

I’ll also be restocking a Swede and I’m considering cutting it for a suppressor. Can you comment on the load/MV you’re seeing from yours?

 

[WI-Carcosa]

Very nice. Makes me wonder if I should have stayed with my original single color rather than change to a ripped pattern.

I’ll also be restocking a Swede and I’m considering cutting it for a suppressor. Can you comment on the load/MV you’re seeing from yours?

Sure thing. Currently running a 135g DRT terminal shock with n560 that’s spicy at 2740. I will be trying n555 and h4350 soon to see if I can get 2700+ and how those do. This setup is going to kill a pile of stuff very soon

 

[Gadjet]

Tikka T3 Rokstok no rail
Mil spec green single color cerakote
Spacers added 14.25” lop (will test and change as needed). 4mm Allen key is needed for changing out spacers.
Tikka T3 6.5 x55 Swede 19” barrel w tbac 7 and spartan tac bipod, maven rs 1.2

Stock weighed 33oz with spacers. UM labeled recoil lug. It was a very tight fit so I needed to flip the action side down on carpeted floor and give it a little English to seat in there and then it fit tight but perfect to put it all together. Can’t wait to shoot this thing.

9lb 8oz with suppressor but No mag or bipod. Should be right around 10lbs will everything.

View attachment 781389
View attachment 781390

Great looking setup! Seems a tad on the heavy side.

 

[Bsnyder]

Wife’s stock showed up nice surprise before range day
*******

Well would have been a nice surprise but the surprise was the m5 bottom metal in let DOES NOT FIT Hawkins hunter bottom metal.

 

[camp run-a-muk]

UM knocked it out of the park. Just got both of my Rokstoks yesterday. Rem 700 long action arca/pic and a Tikka with arc rail.
Rifle is a (2023 build) 7prc with a Batt Mach. LA Igniter with a benchmark fluted barrel. Upgraded to a newUM bottle metal and magazine. Installed by UM and the action screws did need to be shorter. Also a shim on one screw. Important info for anyone with the same set up.
Cerekote was spot on with my other custom paint jobs of the past with UM.
UM made sure everything was good before I went home. I'm going to bed and final fit at home. I enjoy doing that work myself. Just a little sanding because it is a custom rifle and action.
Customer service was excellent. Be patient, it's definitely worth it. I have shot this stock in another gun and really like it. Prior stock was a XLR chassis.
I'm a very happy and glad I waited.
Definitely be buying another Rokstok in the future.

 

[Bsnyder]

Wife’s stock showed up nice surprise before range day
*******

Well would have been a nice surprise but the surprise was the m5 bottom metal in let DOES NOT FIT Hawkins hunter bottom metal.

Update…. 3 hours later 2 hardware stores but it is now I believe functional. Find out in the morning. Wife loves it. I need to do some more work on the inside of the stock to allow the hunter mag to release but for now it’s shootable

 

[ChrisAU]

Update…. 3 hours later 2 hardware stores but it is now I believe functional. Find out in the morning. Wife loves it. I need to do some more work on the inside of the stock to allow the hunter mag to release but for now it’s shootable

What did you have to modify?

 

[Bsnyder]

What did you have to modify?

You can see the pint paint pin mark I had to file down then had to trim an action down 3 threads. The action screw that is what it is. But using the file didn’t make me happy I called and left messages then said screw it we waited 10 months I’m going for it.

 

[Bsnyder]

Rokstock update post range session. Wife shot her rok stock which that rifle runs a 170 grain bullet at 3k her rifle that’s in a manners lrh runs a 190 grain bullet at 2900. As we are leaving the range her comment was

F$&@in Rokstock why do I have to like you so much. So the rest of today will be spent loading because her lrh rifle is getting benched for elk season which mind you starts next weekend so we can finish finding a load for her rockstock gun so she can elk hunt it. All things echoed about felt recoil reduction are all things she experienced. One other thing I’ll add is her rock stock rifle is a full pound lighter.

 

[ChrisAU]

Ordered a McGowen barrel and a Rokstok for a 18” 6CM build on the same day, got the McGowen this week. Ordered a Falkor LW7 Friday. Hope to see my Rokstok in a month or two since I’m a Rem 700 Heathen ha.

 

[letrbuck]

Ordered a McGowen barrel and a Rokstok for a 18” 6CM build on the same day, got the McGowen this week. Ordered a Falkor LW7 Friday. Hope to see my Rokstok in a month or two since I’m a Rem 700 Heathen ha.

View attachment 782268

How long was your mcgowen lead time? I'm waiting on am 18" 6 creed from them

 

[ChrisAU]

How long was your mcgowen lead time? I'm waiting on am 18" 6 creed from them

Took them right at 10 weeks. Pleased with that.

 

[bojangles808]

Ordered a McGowen barrel and a Rokstok for a 18” 6CM build on the same day, got the McGowen this week. Ordered a Falkor LW7 Friday. Hope to see my Rokstok in a month or two since I’m a Rem 700 Heathen ha.

View attachment 782268

did you get a pbb hybrid lite contour through them? weight? looks good

 

[Dobermann]

Ordered a McGowen barrel and a Rokstok for a 18” 6CM build on the same day, got the McGowen this week. Ordered a Falkor LW7 Friday. Hope to see my Rokstok in a month or two since I’m a Rem 700 Heathen ha.

View attachment 782268

Is that a cerakoted Maven ... ?

 

[ChrisAU]

did you get a pbb hybrid lite contour through them? weight? looks good

It’s a Douglas #2 contour with spiral flutes. 2lb 2oz on my scale.

 

[ChrisAU]

Is that a cerakoted Maven ... ?

Indeed it is. Roman Arms in San Antonio TX does a wonderful job laser re-etching the markings. Reasonably priced too. They’ve done a few for me.

 

[Dobermann]

Indeed it is. Roman Arms in San Antonio TX does a wonderful job laser re-etching the markings. Reasonably priced too. They’ve done a few for me.

Very, very, sexy.

Don't tell @mxgsfmdpx, though, or he'll want one in all orange ...

 

[Bsnyder]

Ordered a McGowen barrel and a Rokstok for a 18” 6CM build on the same day, got the McGowen this week. Ordered a Falkor LW7 Friday. Hope to see my Rokstok in a month or two since I’m a Rem 700 Heathen ha.

View attachment 782268

I need your sticker on your scope!!!

 

[ChrisAU]

I need your sticker on your scope!!!

I get them by the dozen from Hoptic USA and have used them hunting and in competition for years…and find I still need them lol

 

[Grizzle]

Has anyone had UM install a spartan gs adapter in front of the mag well or done it themselves? I've installed one in a McMillan stock before with no issue but curious if anyone has on the rokstok